status 22

Anonymous anonymous at easysw.com
Fri Feb 18 13:39:39 PST 2005


I'm using a Samsung ML-1740 with the ppd from the cd loaded onto my gentoo box kernel 2.6.9 with cupsd, ghostscript etc etc need to run the printers installed, I have previously installed another printer that worked fine until it caught on fire :) .

access.log



localhost - root [18/Feb/2005:16:26:51 -0500] "GET /printers/SAMSUNG-ML-1740?op=print-test-page HTTP/1.1" 200 0
localhost - - [18/Feb/2005:16:26:52 -0500] "POST /printers/SAMSUNG-ML-1740 HTTP/1.1" 200 14767
localhost - root [18/Feb/2005:16:26:51 -0500] "GET /printers/SAMSUNG-ML-1740?op=print-test-page HTTP/1.1" 200 1583
localhost - root [18/Feb/2005:16:26:52 -0500] "GET /favicon.ico HTTP/1.1" 404 0



error_log




I [18/Feb/2005:16:26:10 -0500] Scheduler shutting down normally.
D [18/Feb/2005:16:26:10 -0500] StopListening: closing all listen sockets.
D [18/Feb/2005:16:26:10 -0500] PauseListening: clearing input bits...
I [18/Feb/2005:16:26:12 -0500] Listening to 0:631
D [18/Feb/2005:16:26:12 -0500] AddLocation: added location '/'
D [18/Feb/2005:16:26:12 -0500] DenyIP: / deny 00000000/00000000
D [18/Feb/2005:16:26:12 -0500] AllowIP: / allow 7f000001/ffffffff
D [18/Feb/2005:16:26:12 -0500] AddLocation: added location '/admin'
D [18/Feb/2005:16:26:12 -0500] DenyIP: /admin deny 00000000/00000000
D [18/Feb/2005:16:26:12 -0500] AllowIP: /admin allow 7f000001/ffffffff
I [18/Feb/2005:16:26:12 -0500] Loaded configuration file "/etc/cups/cupsd.conf"
I [18/Feb/2005:16:26:12 -0500] Configured for up to 100 clients.
I [18/Feb/2005:16:26:12 -0500] Allowing up to 100 client connections per host.
I [18/Feb/2005:16:26:12 -0500] Full reload is required.
D [18/Feb/2005:16:26:12 -0500] LoadAllPrinters: Loading printer SAMSUNG-ML-1740...
D [18/Feb/2005:16:26:12 -0500] LoadDevices: Added device "ipp"...
D [18/Feb/2005:16:26:12 -0500] LoadDevices: Added device "lpd"...
D [18/Feb/2005:16:26:12 -0500] LoadDevices: Added device "parallel:/dev/lp0"...
D [18/Feb/2005:16:26:12 -0500] LoadDevices: Added device "scsi"...
D [18/Feb/2005:16:26:12 -0500] LoadDevices: Added device "serial:/dev/ttyS0?baud=115200"...
D [18/Feb/2005:16:26:12 -0500] LoadDevices: Added device "serial:/dev/ttyS1?baud=115200"...
D [18/Feb/2005:16:26:12 -0500] LoadDevices: Added device "serial:/dev/ttyS2?baud=115200"...
D [18/Feb/2005:16:26:12 -0500] LoadDevices: Added device "serial:/dev/ttyS3?baud=115200"...
D [18/Feb/2005:16:26:12 -0500] LoadDevices: Added device "serial:/dev/ttyS4?baud=115200"...
D [18/Feb/2005:16:26:12 -0500] LoadDevices: Added device "serial:/dev/ttyS5?baud=115200"...
D [18/Feb/2005:16:26:12 -0500] LoadDevices: Added device "serial:/dev/ttyS6?baud=115200"...
D [18/Feb/2005:16:26:12 -0500] LoadDevices: Added device "serial:/dev/ttyS7?baud=115200"...
D [18/Feb/2005:16:26:12 -0500] LoadDevices: Added device "socket"...
D [18/Feb/2005:16:26:12 -0500] LoadDevices: Added device "usb://Samsung/ML-1740"...
D [18/Feb/2005:16:26:12 -0500] LoadDevices: Added device "usb:/dev/usb/lp1"...
D [18/Feb/2005:16:26:12 -0500] LoadDevices: Added device "usb:/dev/usb/lp2"...
D [18/Feb/2005:16:26:12 -0500] LoadDevices: Added device "usb:/dev/usb/lp3"...
D [18/Feb/2005:16:26:12 -0500] LoadDevices: Added device "usb:/dev/usb/lp4"...
D [18/Feb/2005:16:26:12 -0500] LoadDevices: Added device "usb:/dev/usb/lp5"...
D [18/Feb/2005:16:26:12 -0500] LoadDevices: Added device "usb:/dev/usb/lp6"...
D [18/Feb/2005:16:26:12 -0500] LoadDevices: Added device "usb:/dev/usb/lp7"...
D [18/Feb/2005:16:26:12 -0500] LoadDevices: Added device "usb:/dev/usb/lp8"...
D [18/Feb/2005:16:26:12 -0500] LoadDevices: Added device "usb:/dev/usb/lp9"...
D [18/Feb/2005:16:26:12 -0500] LoadDevices: Added device "usb:/dev/usb/lp10"...
D [18/Feb/2005:16:26:12 -0500] LoadDevices: Added device "usb:/dev/usb/lp11"...
D [18/Feb/2005:16:26:12 -0500] LoadDevices: Added device "usb:/dev/usb/lp12"...
D [18/Feb/2005:16:26:12 -0500] LoadDevices: Added device "usb:/dev/usb/lp13"...
D [18/Feb/2005:16:26:12 -0500] LoadDevices: Added device "usb:/dev/usb/lp14"...
D [18/Feb/2005:16:26:12 -0500] LoadDevices: Added device "usb:/dev/usb/lp15"...
D [18/Feb/2005:16:26:12 -0500] LoadDevices: Added device "http"...
D [18/Feb/2005:16:26:13 -0500] LoadDevices: Added device "smb"...
D [18/Feb/2005:16:26:13 -0500] LoadDevices: Added device "epson:/dev/lp0"...
D [18/Feb/2005:16:26:13 -0500] LoadDevices: Added device "canon:/dev/lp0"...
I [18/Feb/2005:16:26:13 -0500] LoadPPDs: Read "/etc/cups/ppds.dat", 1879 PPDs...
D [18/Feb/2005:16:26:13 -0500] LoadPPDs: Updating ppd "pxlcolor.ppd"...
D [18/Feb/2005:16:26:13 -0500] LoadPPDs: Updating ppd "pxlmono.ppd"...
I [18/Feb/2005:16:26:14 -0500] LoadPPDs: Wrote "/etc/cups/ppds.dat", 1879 PPDs...
D [18/Feb/2005:16:26:14 -0500] LoadAllJobs: Scanning /var/spool/cups...
D [18/Feb/2005:16:26:14 -0500] LoadAllJobs: Loading attributes for job 1...
D [18/Feb/2005:16:26:14 -0500] LoadAllJobs: Loading attributes for job 2...
D [18/Feb/2005:16:26:14 -0500] LoadAllJobs: Loading attributes for job 3...
D [18/Feb/2005:16:26:14 -0500] LoadAllJobs: Loading attributes for job 4...
D [18/Feb/2005:16:26:14 -0500] LoadAllJobs: Loading attributes for job 5...
D [18/Feb/2005:16:26:14 -0500] LoadAllJobs: Loading attributes for job 6...
D [18/Feb/2005:16:26:14 -0500] LoadAllJobs: Loading attributes for job 7...
I [18/Feb/2005:16:26:14 -0500] Full reload complete.
D [18/Feb/2005:16:26:14 -0500] StartListening: NumListeners=1
D [18/Feb/2005:16:26:14 -0500] StartListening: address=00000000 port=631
D [18/Feb/2005:16:26:14 -0500] ResumeListening: setting input bits...
D [18/Feb/2005:16:26:51 -0500] AcceptClient: 5 from localhost:631.
D [18/Feb/2005:16:26:51 -0500] ReadClient: 5 GET /printers/SAMSUNG-ML-1740?op=print-test-page HTTP/1.1
D [18/Feb/2005:16:26:51 -0500] CGI /usr/lib/cups/cgi-bin/printers.cgi started - PID = 3755
I [18/Feb/2005:16:26:51 -0500] Started "/usr/lib/cups/cgi-bin/printers.cgi" (pid=3755)
D [18/Feb/2005:16:26:51 -0500] SendCommand: 5 file=7
D [18/Feb/2005:16:26:51 -0500] AcceptClient: 8 from localhost:631.
D [18/Feb/2005:16:26:52 -0500] ReadClient: 8 POST /printers/SAMSUNG-ML-1740 HTTP/1.1
D [18/Feb/2005:16:26:52 -0500] print_job: request file type is application/postscript.
D [18/Feb/2005:16:26:52 -0500] check_quotas: requesting-user-name = 'root'
D [18/Feb/2005:16:26:52 -0500] print_job: requesting-user-name = 'root'
D [18/Feb/2005:16:26:52 -0500] Adding default job-sheets values "none,none"...
I [18/Feb/2005:16:26:52 -0500] Adding start banner page "none" to job 8.
I [18/Feb/2005:16:26:52 -0500] Adding end banner page "none" to job 8.
I [18/Feb/2005:16:26:52 -0500] Job 8 queued on 'SAMSUNG-ML-1740' by 'root'.
D [18/Feb/2005:16:26:52 -0500] Job 8 hold_until = 0
D [18/Feb/2005:16:26:52 -0500] StartJob(8, 0x8099920)
D [18/Feb/2005:16:26:52 -0500] StartJob() id = 8, file = 0/1
D [18/Feb/2005:16:26:52 -0500] job-sheets=none,none
D [18/Feb/2005:16:26:52 -0500] banner_page = 0
D [18/Feb/2005:16:26:52 -0500] StartJob: argv = "SAMSUNG-ML-1740","8","root","Test Page","1","","/var/spool/cups/d00008-001"
D [18/Feb/2005:16:26:52 -0500] StartJob: envp[0]="PATH=/usr/lib/cups/filter:/bin:/usr/bin"
D [18/Feb/2005:16:26:52 -0500] StartJob: envp[1]="SOFTWARE=CUPS/1.1"
D [18/Feb/2005:16:26:52 -0500] StartJob: envp[2]="USER=root"
D [18/Feb/2005:16:26:52 -0500] StartJob: envp[3]="CHARSET=utf-8"
D [18/Feb/2005:16:26:52 -0500] StartJob: envp[4]="LANG=en_US"
D [18/Feb/2005:16:26:52 -0500] StartJob: envp[5]="PPD=/etc/cups/ppd/SAMSUNG-ML-1740.ppd"
D [18/Feb/2005:16:26:52 -0500] StartJob: envp[6]="CUPS_SERVERROOT=/etc/cups"
D [18/Feb/2005:16:26:52 -0500] StartJob: envp[7]="RIP_MAX_CACHE=8m"
D [18/Feb/2005:16:26:52 -0500] StartJob: envp[8]="TMPDIR=/var/spool/cups/tmp"
D [18/Feb/2005:16:26:52 -0500] StartJob: envp[9]="CONTENT_TYPE=application/postscript"
D [18/Feb/2005:16:26:52 -0500] StartJob: envp[10]="DEVICE_URI=usb://Samsung/ML-1740"
D [18/Feb/2005:16:26:52 -0500] StartJob: envp[11]="PRINTER=SAMSUNG-ML-1740"
D [18/Feb/2005:16:26:52 -0500] StartJob: envp[12]="CUPS_DATADIR=/usr/share/cups"
D [18/Feb/2005:16:26:52 -0500] StartJob: envp[13]="CUPS_FONTPATH=/usr/share/cups/fonts"
D [18/Feb/2005:16:26:52 -0500] StartJob: envp[14]="CUPS_SERVER=localhost"
D [18/Feb/2005:16:26:52 -0500] StartJob: envp[15]="IPP_PORT=631"
D [18/Feb/2005:16:26:52 -0500] StartJob: statusfds = [ 9 10 ]
D [18/Feb/2005:16:26:52 -0500] StartJob: filterfds[1] = [ 11 -1 ]
D [18/Feb/2005:16:26:52 -0500] StartJob: filter = "/usr/lib/cups/filter/pstops"
D [18/Feb/2005:16:26:52 -0500] StartJob: filterfds[0] = [ 12 13 ]
D [18/Feb/2005:16:26:52 -0500] start_process("/usr/lib/cups/filter/pstops", 0xbffefb50, 0xbffeeec0, 11, 13, 10)
I [18/Feb/2005:16:26:52 -0500] Started filter /usr/lib/cups/filter/pstops (PID 3757) for job 8.
D [18/Feb/2005:16:26:52 -0500] StartJob: filter = "/usr/lib/cups/filter/ppmtospl2"
D [18/Feb/2005:16:26:52 -0500] StartJob: filterfds[1] = [ 11 14 ]
D [18/Feb/2005:16:26:52 -0500] start_process("/usr/lib/cups/filter/ppmtospl2", 0xbffefb50, 0xbffeeec0, 12, 14, 10)
I [18/Feb/2005:16:26:52 -0500] Started filter /usr/lib/cups/filter/ppmtospl2 (PID 3758) for job 8.
D [18/Feb/2005:16:26:52 -0500] StartJob: backend = "/usr/lib/cups/backend/usb"
D [18/Feb/2005:16:26:52 -0500] StartJob: filterfds[0] = [ -1 12 ]
D [18/Feb/2005:16:26:52 -0500] start_process("/usr/lib/cups/backend/usb", 0xbffefb50, 0xbffeeec0, 11, 12, 10)
I [18/Feb/2005:16:26:52 -0500] Started backend /usr/lib/cups/backend/usb (PID 3759) for job 8.
D [18/Feb/2005:16:26:52 -0500] ProcessIPPRequest: 8 status_code=0
E [18/Feb/2005:16:26:52 -0500] PID 3758 stopped with status 22!
D [18/Feb/2005:16:26:52 -0500] [Job 8] /usr/lib/cups/filter/ppmtospl2: No such file or directory
D [18/Feb/2005:16:26:52 -0500] [Job 8] Page = 612x792; 12,12 to 600,780
D [18/Feb/2005:16:26:52 -0500] [Job 8] slowcollate=0, slowduplex=0, sloworder=0
D [18/Feb/2005:16:26:52 -0500] [Job 8] 0 %%BoundingBox: 0 0 612 792
D [18/Feb/2005:16:26:52 -0500] [Job 8] 0 %%Pages: 1
D [18/Feb/2005:16:26:52 -0500] [Job 8] 0 %%LanguageLevel: 1
D [18/Feb/2005:16:26:52 -0500] [Job 8] 0 %%DocumentData: Clean7Bit
D [18/Feb/2005:16:26:52 -0500] [Job 8] 0 %%DocumentSuppliedResources: procset testprint/1.1
D [18/Feb/2005:16:26:52 -0500] [Job 8] 0 %%DocumentNeededResources: font Helvetica Helvetica-Bold Times-Roman
D [18/Feb/2005:16:26:52 -0500] [Job 8] 0 %%Creator: Michael Sweet, Easy Software Products
D [18/Feb/2005:16:26:52 -0500] [Job 8] 0 %%CreationDate: May 11, 1999
D [18/Feb/2005:16:26:52 -0500] [Job 8] 0 %%Title: Test Page
D [18/Feb/2005:16:26:52 -0500] [Job 8] 0 %%EndComments
D [18/Feb/2005:16:26:52 -0500] [Job 8] 0 %%BeginProlog
D [18/Feb/2005:16:26:52 -0500] [Job 8] 0 %%BeginResource procset testprint 1.1 0
D [18/Feb/2005:16:26:52 -0500] [Job 8] 0 %%EndResource
D [18/Feb/2005:16:26:52 -0500] [Job 8] 0 %%EndProlog
D [18/Feb/2005:16:26:52 -0500] [Job 8] 0 %%Page: 1 1
D [18/Feb/2005:16:26:52 -0500] [Job 8] 0 %%Page: 1 1
D [18/Feb/2005:16:26:52 -0500] [Job 8] pw = 587.0, pl = 767.0
D [18/Feb/2005:16:26:52 -0500] [Job 8] PageLeft = 12.5, PageRight = 599.5
D [18/Feb/2005:16:26:52 -0500] [Job 8] PageTop = 779.5, PageBottom = 12.5
D [18/Feb/2005:16:26:52 -0500] [Job 8] PageWidth = 612.0, PageLength = 792.0
D [18/Feb/2005:16:26:52 -0500] [Job 8] 0 %%EOF
D [18/Feb/2005:16:26:52 -0500] [Job 8] Saw EOF!
D [18/Feb/2005:16:26:52 -0500] [Job 8] Printer using device file "/dev/usb/lp0"...
D [18/Feb/2005:16:26:52 -0500] CloseClient: 8
D [18/Feb/2005:16:26:52 -0500] [Job 8] LPGETSTATUS returned a port status of 18...
D [18/Feb/2005:16:26:52 -0500] UpdateJob: job 8, file 0 is complete.
D [18/Feb/2005:16:26:52 -0500] CancelJob: id = 8
D [18/Feb/2005:16:26:52 -0500] StopJob: id = 8, force = 0
D [18/Feb/2005:16:26:52 -0500] StopJob: printer state is 3
D [18/Feb/2005:16:26:52 -0500] ReadClient: 5 GET /favicon.ico HTTP/1.1
D [18/Feb/2005:16:26:52 -0500] SendError: 5 code=404 (Not Found)
D [18/Feb/2005:16:26:52 -0500] CloseClient: 5



I've been at this for about 2 hours now and have given up hope on what I can accomplish so anyone with a clue as to what to do, I'd appreciate it :)

fyi  I can print the demo page set in the printers hardware I just can't get the computer to print a test page or anything else to it




More information about the cups-devel mailing list