Is Driver for LaserJet III Broken
Russ Fineman
russbucket at nwi.net
Sun Jan 15 09:06:21 PST 2006
Jack Denman wrote:
> Is the Laserjet III non-postscript broken? I have used this printer on
> CUPS for years on various SuSE distributions and it worked right up to
> SuSE 9.2. On SuSE 9.3 CUPS fails to configure the LP LaserJet III
>
> I have examined the ppd file and it is the non-Foomatic GIMP driver and
> the examination of the ppd says it's the right driver.
>
> CUPS configured correctly my other printer the HP all-in-one on the USB.
> It works
>
> If I do
> echo "hello" world" > /dev/lp0
> it works and Windows prints on the HP LaserJet III just fine
>
> The debug file reveals that the socket closes without explanation. The
> Form Feed light comes on during the test print from the configuration and
> stops until I take it off line and push the form feed button on the
> printer. The printing output is tons of garbage. The print job remains in
> limbo unless I keep forcing the printer with the form feed button.
>
> I have both GIMP and Ghostscript installed.
>
> Here are the first few lines of the ppd file
>
> Any help would be appreciated.
>
>
> *PPD-Adobe: "4.3"
> *%PPD file for CUPS/Gimp-Print.
> *%Copyright 1993-2001 by Easy Software Products, All Rights Reserved.
> *%This PPD file may be freely used and distributed under the terms of
> *%the GNU GPL.
> *FormatVersion: "4.3"
> *FileVersion: "4.2.7"
> *LanguageVersion: English
> *LanguageEncoding: ISOLatin1
> *PCFileName: "STP00224.PPD"
> *Manufacturer: "HP"
> *Product: "(AFPL Ghostscript)"
> *Product: "(GNU Ghostscript)"
> *Product: "(ESP Ghostscript)"
> *ModelName: "HP LaserJet III series"
> *ShortNickName: "HP LaserJet III series"
> *NickName: "HP LaserJet III series - CUPS+Gimp-Print v4.2.7"
> *PSVersion: "(2017.000) 550"
> *LanguageLevel: "2"
> *ColorDevice: False
> *DefaultColorSpace: Gray
> *FileSystem: False
> *LandscapeOrientation: Plus90
> *TTRasterizer: Type42
> *RequiresPageRegion All: True
> *cupsVersion: 1.1
> *cupsModelNumber: "3"
> *cupsManualCopies: True
> *cupsFilter: "application/vnd.cups-raster 100 rastertoprinter"
I have a IIIP running on SuSE10.0 with no problems. Printer is hooked up on
my parallel port. Driver I'm using is:HP LaserJet 3P w/ PCL5 Foomatic/ljet4
(recommended). I have not tryed the GIMP driver.
--
Russ
More information about the cups-devel
mailing list