[cups.bugs] [CRIT] STR #2954: HP Laser printer hangs on cancel job

Prashant pshah.mumbai at gmail.com
Sat Sep 27 07:59:23 PDT 2008


DO NOT REPLY TO THIS MESSAGE.  INSTEAD, POST ANY RESPONSES TO THE LINK BELOW.

[STR New]

Whenever I cancel a job, my printer wont print after that. Its really
strange. I tried everything (lprm, purge the queue, restart printer,
restart machine, restart cups) but the printer goes in some sort of hang
stage even though there are no jobs. There are two lights on the printer
(one green and other red). The red light keeps blinking for sometime
indicating there is some sort of problem even after restarting the
printer.

Normally printer goes two cycles when started. Whenever there is the
problem with printing as above, it will also skips the second cycle.

After fews days it starts working again !

This happens only under Linux and not windows. I am using Ubuntu Hardy
release.

Here is the kernel log when the problem starts

Sep 25 21:26:13 linuxdesktop kernel: [  585.102756] PPP BSD Compression
module registered
Sep 25 21:26:48 linuxdesktop kernel: [  620.309291] usb 1-2: new full
speed USB device using ohci_hcd and address 8
Sep 25 21:26:48 linuxdesktop kernel: [  620.532996] usb 1-2: configuration
#1 chosen from 1 choice
Sep 25 21:26:48 linuxdesktop kernel: [  620.542922] usblp0: USB
Bidirectional printer dev 8 if 0 alt 0 proto 2 vid 0x03F0 pid 0x2B17
Sep 25 21:26:55 linuxdesktop kernel: [  627.043757] usb 1-2: usbfs:
USBDEVFS_CONTROL failed cmd python rqt 128 rq 6 len 255 ret -110
Sep 25 21:27:00 linuxdesktop kernel: [  632.039800] usb 1-2: usbfs:
USBDEVFS_CONTROL failed cmd python rqt 128 rq 6 len 255 ret -110
Sep 25 21:27:18 linuxdesktop kernel: [  650.392201] usb 1-2: USB
disconnect, address 8
Sep 25 21:27:18 linuxdesktop kernel: [  650.393206] usblp0: nonzero read
bulk status received: -62
Sep 25 21:27:18 linuxdesktop kernel: [  650.393214] usblp0: nonzero write
bulk status received: -108
Sep 25 21:27:18 linuxdesktop kernel: [  650.395323] usblp0: removed


Here is the log when it is working fine

Sep 25 15:12:51 linuxdesktop kernel: [  102.010742] PPP BSD Compression
module registered
Sep 25 15:44:32 linuxdesktop kernel: [ 2007.777765]
audit(1222337672.428:6): type=1503 operation="inode_permission"
requested_mask="r::" denied_mask="r::" name="/etc/ppp/resolv.conf"
pid=4943 profile="/usr/sbin/cupsd" namespace="default"
Sep 25 16:18:43 linuxdesktop kernel: [ 4056.989541] usb 1-2: new full
speed USB device using ohci_hcd and address 2
Sep 25 16:18:43 linuxdesktop kernel: [ 4057.213226] usb 1-2: configuration
#1 chosen from 1 choice
Sep 25 16:18:44 linuxdesktop kernel: [ 4058.560315] usblp0: USB
Bidirectional printer dev 2 if 0 alt 0 proto 2 vid 0x03F0 pid 0x2B17
Sep 25 16:18:44 linuxdesktop kernel: [ 4058.560803] usbcore: registered
new interface driver usblp
Sep 25 16:18:54 linuxdesktop kernel: [ 4068.144841] usb 1-2: usbfs:
USBDEVFS_CONTROL failed cmd python rqt 128 rq 6 len 255 ret -110
Sep 25 16:18:59 linuxdesktop kernel: [ 4073.139881] usb 1-2: usbfs:
USBDEVFS_CONTROL failed cmd python rqt 128 rq 6 len 255 ret -110
Sep 25 16:19:53 linuxdesktop kernel: [ 4127.365105]
audit(1222339793.827:7): type=1503 operation="inode_permission"
requested_mask="::rw" denied_mask="::rw" name="/dev/tty" pid=6492
profile="/usr/sbin/cupsd" namespace="default"
Sep 25 16:19:56 linuxdesktop kernel: [ 4130.111513] usb 1-2: usbfs:
USBDEVFS_CONTROL failed cmd hp rqt 128 rq 6 len 255 ret -110
Sep 25 16:20:02 linuxdesktop kernel: [ 4136.522574] usb 1-2: usbfs:
USBDEVFS_CONTROL failed cmd hpijs rqt 128 rq 6 len 255 ret -110
Sep 25 16:20:31 linuxdesktop kernel: [ 4165.185638] usb 1-2: usbfs:
USBDEVFS_CONTROL failed cmd hp rqt 128 rq 6 len 255 ret -110
Sep 25 16:20:52 linuxdesktop kernel: [ 4186.343417] usb 1-2: USB
disconnect, address 2
Sep 25 16:20:53 linuxdesktop kernel: [ 4186.343621] usblp0: removed

Link: http://www.cups.org/str.php?L2954
Version: 1.3.7





More information about the cups-devel mailing list