make error after compile 1.4.6
paul young
paul.young at wiltshire.gov.uk
Thu Mar 10 07:48:35 PST 2011
i have edite out the defines within config.h but then had another error for linking cupsd.
I searched the archives and found a link stating that it maybe possible to remove the "-lnsl" entry from the Makefile.
This has solved the Linking of cupsd but now gives me:
Linking websearch...
Undefined first referenced
symbol in file
gethostbyname ../cups/libcups.a(http-addr.o) (symbol belongs to implicit dependency /usr/local/lib/libnsl.so.1)
ld: fatal: Symbol referencing errors. No output written to websearch
collect2: ld returned 1 exit status.
Would I be better off getting the sledge hammer out of the car :), it seems that after fixing one issue I roll into another :(
Regards
Paul
> Edit config.h and comment out the HAVE_STATFS define.
>
> (this is fixed in the forthcoming 1.4.7 release)
>
> On Mar 10, 2011, at 3:13 AM, paul young wrote:
>
> >=20
> > Getting closer. I now have the following output when running the =
> "make" command.
> >=20
> > At this point I'm installing onto a test server that has cups 1.2.7 =
> installed but no printers:
> >=20
> > printers.c: In function `cupsdCreateCommonData':
> > printers.c:493: error: too few arguments to function `statfs'
> > printers.c: In function `add_printer_filter':
> > printers.c:3691: warning: unsigned int format, mode_t arg (arg 6)
> > printers.c:3718: warning: unsigned int format, mode_t arg (arg 6)
> > *** Error code 1
> > The following command caused the error:
> > gcc -Wall -Wno-format-y2k -fPIC -Os -g -I.. -D_CUPS_SOURCE =
> -DOPENSSL_DISABLE_OLD_DES_SUPPORT -D_LARGEFILE_SOURCE =
> -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=3D64 -D_THREAD_SAFE =
> -D_REENTRANT -D_POSIX_PTHREAD_SEMANTICS -c -o printers.o printers.c
> > make: Fatal error: Command failed for target `printers.o'
> > Current working directory /opt/csw/cups-1.4.6/scheduler
> > *** Error code 1
> > The following command caused the error:
> > for dir in cups filter backend berkeley cgi-bin driver locale man =
> monitor notifier ppdc scheduler systemv test conf data doc examples =
> fonts templates; do\
> > echo Making all in $dir... ;\
> > (cd $dir ; make all ) || exit 1;\
> > done
> > make: Fatal error: Command failed for target `all'
> >=20
> >=20
> > Is this due to another flag being required during the configure stage?
> >=20
> > regards
> >=20
> > Paul
> >=20
> >=20
> >=20
> >=20
> >> Thank you for your quick reply, I will give it a try now.
> >>=20
> >> Interesting bit for me is that the site I'm currently working at =
> stated they were running Solaris 10, is this an old version?
> >>=20
> >>=20
> >>=20
> >>=20
> >>> You are using an old version of Solaris - add the "--disable-gssapi" =
> =3D
> >>> configure option to make the problem go away or install a newer =
> version =3D
> >>> of Solaris that has working GSSAPI headers.
> >>>=20
> >>> On Mar 9, 2011, at 8:44 AM, paul young wrote:
> >>>=20
> >>>> Hi,
> >>>> =3D20
> >>>> I'm quite new to all of the NIX environmet, coming from a Windows =3D=
>
> >>> support back ground.
> >>>> =3D20
> >>>> I have managed to run the ./compile for cups 1.4.6. This took a =
> while =3D
> >>> for me while debugging missing /libs etc but got there in the end.
> >>>> =3D20
> >>>> Once this completed I almost jumped for joy and jumped straight to =
> the =3D
> >>> next step of "make".
> >>>> =3D20
> >>>> This has failed with the following ppdc error:
> >>>> =3D20
> >>>> Compiling ppdc-array.cxx...
> >>>> In file included from ../cups/http-private.h:60,
> >>>> from ../cups/globals.h:26,
> >>>> from ppdc-private.h:24,
> >>>> from ppdc-array.cxx:29:
> >>>> /usr/include/kerberosv5/krb5.h:11: warning: ignoring #pragma ident
> >>>> In file included from ../cups/http-private.h:60,
> >>>> from ../cups/globals.h:26,
> >>>> from ppdc-private.h:24,
> >>>> from ppdc-array.cxx:29:
> >>>> /usr/include/kerberosv5/krb5.h:3122: error: expected declaration =3D
> >>> before '}' token
> >>>> In file included from ../cups/http-private.h:60,
> >>>> from ../cups/globals.h:26,
> >>>> from ppdc-private.h:24,
> >>>> from ppdc-array.cxx:29:
> >>>> /usr/include/kerberosv5/krb5.h:3121:1: unterminated #ifdef
> >>>> /usr/include/kerberosv5/krb5.h:8:1: unterminated #ifndef
> >>>> In file included from ../cups/globals.h:26,
> >>>> from ppdc-private.h:24,
> >>>> from ppdc-array.cxx:29:
> >>>> ./cups/http-private.h:59:1: unterminated #ifdef
> >>>> ./cups/http-private.h:43:1: unterminated #ifdef
> >>>> ./cups/http-private.h:18:1: unterminated #ifndef
> >>>> In file included from ppdc-private.h:24,
> >>>> from ppdc-array.cxx:29:
> >>>> ./cups/globals.h:18:1: unterminated #ifndef
> >>>> In file included from ppdc-array.cxx:29:
> >>>> ppdc-private.h:15:1: unterminated #ifndef
> >>>> *** Error code 1
> >>>> The following command caused the error:
> >>>> g++ -Wall -Wno-format-y2k -fPIC -Os -g -I.. -D_CUPS_SOURCE =3D
> >>> -I/usr/include/kerberosv5 -DOPENSSL_DISABLE_OLD_DES_SUPPORT =3D
> >>> -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=3D3D64 =
> =3D
> >>> -D_THREAD_SAFE -D_REENTRANT -D_POSIX_PTHREAD_SEMANTICS -c -o =3D
> >>> ppdc-array.o ppdc-array.cxx
> >>>> make: Fatal error: Command failed for target `ppdc-array.o'
> >>>> Current working directory /opt/csw/cups-1.4.6/ppdc
> >>>> *** Error code 1
> >>>> The following command caused the error:
> >>>> for dir in cups filter backend berkeley cgi-bin driver locale man =3D=
>
> >>> monitor notifier ppdc scheduler systemv test conf data doc =
> examples =3D
> >>> fonts templates; do\
> >>>> echo Making libraries in $dir... ;\
> >>>> (cd $dir ; make libs) || exit 1;\
> >>>> done
> >>>> make: Fatal error: Command failed for target `libs'
> >>>> =3D20
> >>>> =3D20
> >>>> I then tried to uncomment the line "#include "ppdc-private.h"
> >>>> =3D20
> >>>> which then gives me a string of other errors which I can post if =3D
> >>> needed.
> >>>> =3D20
> >>>> Can anyone point out what i'm doing wrong please, my time scale to =
> =3D
> >>> update cups from 1.2.7 to 1.4.6 is running out fast.
> >>>> =3D20
> >>>> Kind Regards
> >>>> =3D20
> >>>> Paul
> >>>> =3D20
> >>>> =3D20
> >>>> _______________________________________________
> >>>> cups-bugs mailing list
> >>>> cups-bugs at easysw.com
> >>>> http://lists.easysw.com/mailman/listinfo/cups-bugs
> >>>=20
> >>> =
> ________________________________________________________________________
> >>> Michael Sweet, Senior Printing System Engineer, PWG Chair
> >>>=20
> >>=20
> >=20
> > _______________________________________________
> > cups-bugs mailing list
> > cups-bugs at easysw.com
> > http://lists.easysw.com/mailman/listinfo/cups-bugs
>
> ________________________________________________________________________
> Michael Sweet, Senior Printing System Engineer, PWG Chair
>
More information about the cups-devel
mailing list