[cups.general] Problems setting up printers.

[Erik Jakobsen]

Erik Jakobsen wrote:

> It was the same using the localhost, but the culprit was found in my 
> server's firewall, that was set up as if it was a router :-)
> 
> Now I can open like http://192.168.1.1:631, and both printers works here.
> 
> MFG
> 
> Erik


I still have problems, but now the case is the print out. I can fine 
print via the webinterface called by http://192.168.1.1:631, both my 
printers are printing ok, and does print just after the enter.

If I wan to print out from a linux client, there is a HUGE delay 
-4-5min.'s- within the print starts.

I wonder what that could be.

I do print via the Kprinter.

Can any give me help ?.

At least I cannot find any errors that tells me where the problem is:

Here's the client's error_log:

I [02/Jul/2004:05:37:55 +0200] Listening to 0:631
E [02/Jul/2004:05:37:55 +0200] Unknown Location directive # on line 813.
I [02/Jul/2004:05:37:55 +0200] Loaded configuration file 
"/etc/cups/cupsd.conf"
I [02/Jul/2004:05:37:55 +0200] Configured for up to 100 clients.
I [02/Jul/2004:05:37:55 +0200] Allowing up to 100 client connections per 
host.
I [02/Jul/2004:05:37:55 +0200] Full reload is required.
I [02/Jul/2004:05:37:59 +0200] LoadPPDs: Read "/etc/cups/ppds.dat", 3592 
PPDs...
I [02/Jul/2004:05:38:02 +0200] LoadPPDs: No new or changed PPDs...
I [02/Jul/2004:05:38:02 +0200] Full reload complete.
I [02/Jul/2004:05:38:18 +0200] Added remote printer "hl5040"...
I [02/Jul/2004:06:12:17 +0200] Added remote printer "hl5040 at 192.168.1.1"...
I [02/Jul/2004:06:12:17 +0200] Added implicit class "hl5040"...

Here's the error_log file from my server, that has the printers connected:

I [02/Jul/2004:06:03:40 +0200] LoadPPDs: Wrote "/etc/cups/ppds.dat", 936 
PPDs...
E [02/Jul/2004:06:10:45 +0200] Scheduler shutting down due to SIGTERM.
I [02/Jul/2004:06:10:45 +0200] Listening to 0:631
I [02/Jul/2004:06:10:45 +0200] Sending browsing info to c0a801ff:631
I [02/Jul/2004:06:10:45 +0200] Configured for up to 100 clients.
I [02/Jul/2004:06:10:45 +0200] Allowing up to 10 client connections per 
host.
I [02/Jul/2004:06:10:45 +0200] LoadPPDs: Read "/etc/cups/ppds.dat", 936 
PPDs...
I [02/Jul/2004:06:10:45 +0200] LoadPPDs: Wrote "/etc/cups/ppds.dat", 936 
PPDs...
I [02/Jul/2004:06:11:18 +0200] Job 16 queued on 'hl5040' by 'root'.
I [02/Jul/2004:06:11:18 +0200] Started filter 
/usr/lib/cups/filter/texttops (PID 18825) for job 16.
I [02/Jul/2004:06:11:18 +0200] Started filter 
/usr/lib/cups/filter/pstops (PID 18826) for job 16.
I [02/Jul/2004:06:11:18 +0200] Started filter 
/usr/lib/cups/filter/cupsomatic (PID 18827) for job 16.
I [02/Jul/2004:06:11:18 +0200] Started backend 
/usr/lib/cups/backend/parallel (PID 18828) for job 16.
I [02/Jul/2004:06:15:06 +0200] Job 17 queued on 'hl5040' by 'erik'.
I [02/Jul/2004:06:15:06 +0200] Started filter 
/usr/lib/cups/filter/pstops (PID 19001) for job 17.
I [02/Jul/2004:06:15:06 +0200] Started filter 
/usr/lib/cups/filter/cupsomatic (PID 19002) for job 17.
I [02/Jul/2004:06:15:06 +0200] Started backend 
/usr/lib/cups/backend/parallel (PID 19003) for job 17.


Regards.

Erik.