Cups eat all my cpu on admin "Add printer"
Sascha Baier
Sascha.Baier at web.de
Mon Jun 28 01:07:55 PDT 2004
Hi Laurent,
I have the same problem.
When I'm working in the web administration or even when I start cupsd,
there is a heavy load on the maschine (cupsd CPU=99%)
Would be great if anybody could help us.
Best regards,
Sascha.
Laurent Hugé schrieb:
> Hi,
>
> I've got a big problem in configuring cups. I launch cupsd, log in http://127.0.0.1:631/admin, I enter the root's password and select "Add printer" ; then cups takes more than three minutes at 98% load (source : top with an AMD Athlon XP 2400+) before displaying the page ; I fill the fields, validate, and it turns again at 98% load for three minutes to display the page with port ; and then nothing because there's no port available on the menu !
> The behaviour of my browser (Konqueror) is strange : begining at 1ko/s, then rapidly to 500o/s, 250o/s, then nothing. My firewall doesn't filter anything on localhost.
> I can't find anything special in the log, except lines of things like :
> Closing client 8 after 300 seconds of inactivity...
> CloseClient() 8
> CloseClient: Removing fd 8 from InputSet and OutputSet...
> ReadClient() 6, used=0
> CloseClient() 6
> CloseClient: Removing fd 6 from InputSet and OutputSet...
> DeleteCert: removing certificate for pid 0
> AddCert: adding certificate for pid 0
> PID 1591 exited with no errors.
> DeleteCert: removing certificate for pid 1591
> WriteClient() 5 1253 bytes
> REQUEST localhost - root "GET /admin/?op=add-printer HTTP/1.1" 200
> 2477
> ...
>
> Here is my cupsd.conf :
> root$ grep -v "^$\|^#" /etc/cups/cupsd.conf (to avoid all comments)
> AccessLog syslog
> DataDir /usr/share/cups
> DocumentRoot /usr//share/doc/cups
> ErrorLog syslog
> FontPath /usr/share/cups/fonts
> LogLevel debug2
> PageLog syslog
> RequestRoot /var/spool/cups
> ServerBin /usr/lib/cups
> ServerRoot /etc/cups
> TempDir /var/spool/cups/tmp
> Port 631
> Browsing Off
> <Location />
> Order Deny,Allow
> Deny From All
> Allow From 127.0.0.1
> </Location>
> <Location /admin>
> AuthType None
> AuthClass System
> Order Deny,Allow
> Deny From All
> Allow From 127.0.0.1
> </Location>
>
> I've remade cups with no optimization, I've checked every directory specified in cupsd.conf, I've checked everything with lpinfo and cups-config, I've tried to use another browser (lynx), I've commented the lines Order Deny,Allow Deny From All Allow From 127.0.0.1 in <Location /admin>, but there's no evolution.
>
> Is somebody able to help me ?
> --
> Laurent Hugé (to write to me, get PasDeSpam off)
> GPG fingerprint = 3AFF A106 39D9 DB2C 885D 41C3 76DC 2C3F 01BE 5D4A
More information about the cups
mailing list