[cups.general] renderer command

Anonymous anonymous at easysw.com
Mon Nov 29 11:46:18 PST 2004


Ok, got the web interface to load - no difference. I tried reinstalling all the relevant packages - no difference. I tried to use the gimp-print driver without foomatic, now I get this (already checked - gs-esp is installed):

D [29/Nov/2004:21:48:33 +0200] AcceptClient: 5 from localhost:631.
D [29/Nov/2004:21:48:34 +0200] ReadClient: 5 POST /printers/Epson HTTP/1.1
D [29/Nov/2004:21:48:34 +0200] print_job: auto-typing file...
D [29/Nov/2004:21:48:34 +0200] print_job: request file type is application/postscript.
D [29/Nov/2004:21:48:34 +0200] check_quotas: requesting-user-name = 'root'
D [29/Nov/2004:21:48:34 +0200] print_job: requesting-user-name = 'root'
D [29/Nov/2004:21:48:34 +0200] Adding default job-sheets values "none,none"...
I [29/Nov/2004:21:48:34 +0200] Adding start banner page "none" to job 12.
I [29/Nov/2004:21:48:34 +0200] Adding end banner page "none" to job 12.
I [29/Nov/2004:21:48:34 +0200] Job 12 queued on 'Epson' by 'root'.
D [29/Nov/2004:21:48:34 +0200] Job 12 hold_until = 0
D [29/Nov/2004:21:48:34 +0200] StartJob(12, 0x80a0ab0)
D [29/Nov/2004:21:48:34 +0200] StartJob() id = 12, file = 0/1
E [29/Nov/2004:21:48:34 +0200] Unable to convert file 0 to printable format forjob 12!
I [29/Nov/2004:21:48:34 +0200] Hint: Do you have ESP Ghostscript installed?
D [29/Nov/2004:21:48:34 +0200] CancelJob: id = 12
D [29/Nov/2004:21:48:34 +0200] ProcessIPPRequest: 5 status_code=0
D [29/Nov/2004:21:48:34 +0200] CloseClient: 5
D [29/Nov/2004:21:48:34 +0200] AcceptClient: 5 from localhost:631.
D [29/Nov/2004:21:48:34 +0200] ReadClient: 5 POST /printers/ HTTP/1.1
D [29/Nov/2004:21:48:34 +0200] ProcessIPPRequest: 5 status_code=1
D [29/Nov/2004:21:48:34 +0200] AcceptClient: 9 from localhost:631.
D [29/Nov/2004:21:48:34 +0200] CloseClient: 5
D [29/Nov/2004:21:48:34 +0200] ReadClient: 9 POST /classes/ HTTP/1.1
D [29/Nov/2004:21:48:34 +0200] ProcessIPPRequest: 9 status_code=1
D [29/Nov/2004:21:48:34 +0200] CloseClient: 9
D [29/Nov/2004:21:48:34 +0200] AcceptClient: 5 from localhost:631.
D [29/Nov/2004:21:48:34 +0200] ReadClient: 5 POST /printers/ HTTP/1.1
D [29/Nov/2004:21:48:34 +0200] ProcessIPPRequest: 5 status_code=1
D [29/Nov/2004:21:48:34 +0200] CloseClient: 5
D [29/Nov/2004:21:48:39 +0200] AcceptClient: 5 from localhost:631.
D [29/Nov/2004:21:48:39 +0200] ReadClient: 5 POST /printers/ HTTP/1.1
D [29/Nov/2004:21:48:39 +0200] ProcessIPPRequest: 5 status_code=1
D [29/Nov/2004:21:48:39 +0200] AcceptClient: 9 from localhost:631.
D [29/Nov/2004:21:48:39 +0200] CloseClient: 5
D [29/Nov/2004:21:48:39 +0200] ReadClient: 9 POST /classes/ HTTP/1.1
D [29/Nov/2004:21:48:39 +0200] ProcessIPPRequest: 9 status_code=1
D [29/Nov/2004:21:48:39 +0200] AcceptClient: 5 from localhost:631.
D [29/Nov/2004:21:48:39 +0200] CloseClient: 9
D [29/Nov/2004:21:48:39 +0200] ReadClient: 5 POST /printers/ HTTP/1.1
D [29/Nov/2004:21:48:39 +0200] ProcessIPPRequest: 5 status_code=1
D [29/Nov/2004:21:48:39 +0200] CloseClient: 5


Anonymous wrote:
> I believe this was generated by the kde control center when configuring my printer. I have both the Gimp-Print package installed and the foomatic one.
> I'd try installing the printer straight from CUPS, but for some odd reason I can't seem to connect to localhost:631, although kcontrol does seem to connect there.
>
> Till Kamppeter wrote:
> > Where did you get this file? It is totally broken. The Gimp-Print
> > package should generate a correct one for you.
> >
> >     Till
> >
> >
> > Anonymous wrote:
> > > There goes:
> > >
> > > # cat /etc/cups/ppd/Epson.ppd
> > > *PPD-Adobe: "4.3"
> > > *%
> > > *% For information on using this, and to obtain the required backend
> > > *% script, consult http://www.linuxprinting.org/
> > > *%
> > > *% This file is published under the GNU General Public License
> > > *%
> > > *% PPD-O-MATIC (3.0.0 or newer) generated this PPD file. It is for use with
> > > *% all programs and environments which use PPD files for dealing with
> > > *% printer capability information. The printer must be configured with the
> > > *% "foomatic-rip" backend filter script of Foomatic 3.0.0 or newer. This
> > > *% file and "foomatic-rip" work together to support PPD-controlled printer
> > > *% driver option access with arbitrary free software printer drivers and
> > > *% printing spoolers.
> > > *%
> > > *% To save this file on your disk, wait until the download has completed
> > > *% (the animation of the browser logo must stop) and then use the
> > > *% "Save as..." command in the "File" menu of your browser or in the
> > > *% pop-up manu when you click on this document with the right mouse button.
> > > *% DO NOT cut and paste this file into an editor with your mouse. This can
> > > *% introduce additional line breaks which lead to unexpected results.
> > > *%
> > > *% You may save this file as 'Epson-Stylus_Color_740-gimp-print.ppd'
> > > *%
> > > *%
> > > *FormatVersion: "4.3"
> > > *FileVersion:   "1.1"
> > > *LanguageVersion: English
> > > *LanguageEncoding: ISOLatin1
> > > *PCFileName:    "GIMP-PRI.PPD"
> > > *Manufacturer:  "Epson"
> > > *Product:       "(Stylus COLOR 740)"
> > > *cupsVersion:   1.0
> > > *cupsManualCopies: True
> > > *cupsModelNumber:  2
> > > *cupsFilter:    "application/vnd.cups-postscript 0 foomatic-rip"
> > > *%pprRIP:        foomatic-rip other
> > > *ModelName:     "Epson Stylus Color 740"
> > > *ShortNickName: "Epson Sty. Color 740 gimp-print"
> > > *NickName:      "Epson Stylus Color 740 Foomatic/gimp-print (recommended)"
> > > *PSVersion:     "(3010.000) 550"
> > > *PSVersion:     "(3010.000) 651"
> > > *PSVersion:     "(3010.000) 652"
> > > *PSVersion:     "(3010.000) 653"
> > > *PSVersion:     "(3010.000) 704"
> > > *PSVersion:     "(3010.000) 705"
> > > *PSVersion:     "(3010.000) 800"
> > > *LanguageLevel: "3"
> > > *ColorDevice:   True
> > > *DefaultColorSpace: RGB
> > > *FileSystem:    False
> > > *Throughput:    "1"
> > > *LandscapeOrientation: Plus90
> > > *TTRasterizer:  Type42
> > >
> > >
> > >
> > >
> > > *FoomaticIDs: Epson-Stylus_Color_740 gimp-print
> > > *FoomaticRIPCommandLine: ""
> > >
> > > *% This is fake. We have no information on how to
> > > *% set the pagesize for this driver in the database. To
> > > *% prevent PPD users from blowing up, we must provide a
> > > *% default pagesize value.
> > >
> > > *OpenUI *PageSize/Media Size: PickOne
> > > *OrderDependency: 10 AnySetup *PageSize
> > > *DefaultPageSize: A4
> > > *PageSize Letter/Letter: "<</PageSize>>setpagedevice"
> > > *PageSize Legal/Legal: "<</PageSize>>setpagedevice"
> > > *PageSize A4/A4: "<</PageSize>>setpagedevice"
> > > *CloseUI: *PageSize
> > >
> > > *OpenUI *PageRegion: PickOne
> > > *OrderDependency: 10 AnySetup *PageRegion
> > > *DefaultPageRegion: A4
> > > *PageRegion Letter/Letter: "<</PageSize>>setpagedevice"
> > > *PageRegion Legal/Legal: "<</PageSize>>setpagedevice"
> > > *PageRegion A4/A4: "<</PageSize>>setpagedevice"
> > > *CloseUI: *PageRegion
> > >
> > > *DefaultImageableArea: A4
> > > *ImageableArea Letter/Letter:   "0 0 612 792"
> > > *ImageableArea Legal/Legal:     "0 0 612 1008"
> > > *ImageableArea A4/A4:   "0 0 595 842"
> > >
> > > *DefaultPaperDimension: A4
> > > *PaperDimension Letter/Letter:  "612 792"
> > > *PaperDimension Legal/Legal:    "612 1008"
> > > *PaperDimension A4/A4:  "595 842"
> > >
> > >
> > >
> > > *% Generic boilerplate PPD stuff as standard PostScript fonts and so on
> > >
> > > *DefaultFont: Courier
> > > *Font AvantGarde-Book: Standard "(001.006S)" Standard ROM
> > > *Font AvantGarde-BookOblique: Standard "(001.006S)" Standard ROM
> > > *Font AvantGarde-Demi: Standard "(001.007S)" Standard ROM
> > > *Font AvantGarde-DemiOblique: Standard "(001.007S)" Standard ROM
> > > *Font Bookman-Demi: Standard "(001.004S)" Standard ROM
> > > *Font Bookman-DemiItalic: Standard "(001.004S)" Standard ROM
> > > *Font Bookman-Light: Standard "(001.004S)" Standard ROM
> > > *Font Bookman-LightItalic: Standard "(001.004S)" Standard ROM
> > > *Font Courier: Standard "(002.004S)" Standard ROM
> > > *Font Courier-Bold: Standard "(002.004S)" Standard ROM
> > > *Font Courier-BoldOblique: Standard "(002.004S)" Standard ROM
> > > *Font Courier-Oblique: Standard "(002.004S)" Standard ROM
> > > *Font Helvetica: Standard "(001.006S)" Standard ROM
> > > *Font Helvetica-Bold: Standard "(001.007S)" Standard ROM
> > > *Font Helvetica-BoldOblique: Standard "(001.007S)" Standard ROM
> > > *Font Helvetica-Narrow: Standard "(001.006S)" Standard ROM
> > > *Font Helvetica-Narrow-Bold: Standard "(001.007S)" Standard ROM
> > > *Font Helvetica-Narrow-BoldOblique: Standard "(001.007S)" Standard ROM
> > > *Font Helvetica-Narrow-Oblique: Standard "(001.006S)" Standard ROM
> > > *Font Helvetica-Oblique: Standard "(001.006S)" Standard ROM
> > > *Font NewCenturySchlbk-Bold: Standard "(001.009S)" Standard ROM
> > > *Font NewCenturySchlbk-BoldItalic: Standard "(001.007S)" Standard ROM
> > > *Font NewCenturySchlbk-Italic: Standard "(001.006S)" Standard ROM
> > > *Font NewCenturySchlbk-Roman: Standard "(001.007S)" Standard ROM
> > > *Font Palatino-Bold: Standard "(001.005S)" Standard ROM
> > > *Font Palatino-BoldItalic: Standard "(001.005S)" Standard ROM
> > > *Font Palatino-Italic: Standard "(001.005S)" Standard ROM
> > > *Font Palatino-Roman: Standard "(001.005S)" Standard ROM
> > > *Font Symbol: Special "(001.007S)" Special ROM
> > > *Font Times-Bold: Standard "(001.007S)" Standard ROM
> > > *Font Times-BoldItalic: Standard "(001.009S)" Standard ROM
> > > *Font Times-Italic: Standard "(001.007S)" Standard ROM
> > > *Font Times-Roman: Standard "(001.007S)" Standard ROM
> > > *Font ZapfChancery-MediumItalic: Standard "(001.007S)" Standard ROM
> > > *Font ZapfDingbats: Special "(001.004S)" Standard ROM
> > >
> > >
> > > Till Kamppeter wrote:
> > >
> > >>Can you post your PPD file (or at least the first 100 lines of it)?
> > >>
> > >>    Till
> > >>
> > >>
> > >>Anonymous wrote:
> > >>
> > >>>Hi,
> > >>>
> > >>>I can't seem to print (I configured my printer through kcontrol and can not even print the test page).
> > >>>I am working on Debian sid, with an Epson stylus color 740, using the foomatic-gimpprint driver. Here is my log(notice the renderer command is empty):
> > >>>D [20/Nov/2004:16:35:49 +0200] [Job 3] Starting renderer
> > >>>D [20/Nov/2004:16:35:49 +0200] [Job 3] JCL: <job data>
> > >>>D [20/Nov/2004:16:35:49 +0200] [Job 3]
> > >>>D [20/Nov/2004:16:35:49 +0200] [Job 3] renderer PID kid4=31236
> > >>>D [20/Nov/2004:16:35:49 +0200] [Job 3] renderer command:
> > >>>D [20/Nov/2004:16:35:49 +0200] [Job 3] renderer return value: 255
> > >>>D [20/Nov/2004:16:35:49 +0200] [Job 3] renderer received signal: 255
> > >>>D [20/Nov/2004:16:35:49 +0200] [Job 3] tail process done writing data to STDOUT
> > >>>D [20/Nov/2004:16:35:49 +0200] [Job 3] KID4 finished
> > >>>D [20/Nov/2004:16:35:50 +0200] AcceptClient: 6 from localhost:631.
> > >>>D [20/Nov/2004:16:35:50 +0200] ReadClient: 6 POST /printers/ HTTP/1.1
> > >>>D [20/Nov/2004:16:35:50 +0200] ProcessIPPRequest: 6 status_code=1
> > >>>D [20/Nov/2004:16:35:50 +0200] CloseClient: 6
> > >>>D [20/Nov/2004:16:35:50 +0200] AcceptClient: 6 from localhost:631.
> > >>>D [20/Nov/2004:16:35:50 +0200] ReadClient: 6 POST /classes/ HTTP/1.1
> > >>>D [20/Nov/2004:16:35:50 +0200] ProcessIPPRequest: 6 status_code=1
> > >>>D [20/Nov/2004:16:35:50 +0200] AcceptClient: 9 from localhost:631.
> > >>>D [20/Nov/2004:16:35:50 +0200] CloseClient: 6
> > >>>D [20/Nov/2004:16:35:50 +0200] ReadClient: 9 POST /printers/ HTTP/1.1
> > >>>D [20/Nov/2004:16:35:50 +0200] ProcessIPPRequest: 9 status_code=1
> > >>>D [20/Nov/2004:16:35:50 +0200] CloseClient: 9
> > >>>D [20/Nov/2004:16:35:51 +0200] [Job 3]
> > >>>D [20/Nov/2004:16:35:51 +0200] [Job 3] Closing renderer
> > >>>D [20/Nov/2004:16:35:51 +0200] [Job 3] KID4 exited with status 0
> > >>>D [20/Nov/2004:16:35:51 +0200] [Job 3] KID3 exited with status 1
> > >>>D [20/Nov/2004:16:35:51 +0200] [Job 3] Renderer exit stat: 1
> > >>>D [20/Nov/2004:16:35:51 +0200] [Job 3] Process dying with "The renderer commandline returned an unrecognized error code 255.", exit stat: 1
> > >>>D [20/Nov/2004:16:35:51 +0200] [Job 3] The renderer command line returned an unrecognized error code 255.
> > >>>D [20/Nov/2004:16:35:52 +0200] [Job 3] Renderer process finished
> > >>>D [20/Nov/2004:16:35:52 +0200] [Job 3] Killing process 31235 (KID3)
> > >>>D [20/Nov/2004:16:35:52 +0200] [Job 3] Process dying with "Error closing renderer", exit stat: 1
> > >>>D [20/Nov/2004:16:35:52 +0200] [Job 3] Error closing renderer
> > >>>E [20/Nov/2004:16:35:52 +0200] PID 31232 stopped with status 1!
> > >>>
> > >>>_______________________________________________
> > >>>cups mailing list
> > >>>cups at easysw.com
> > >>>http://lists.easysw.com/mailman/listinfo/cups
> > >>>
> > >>>
> > >>
> > >
> > > _______________________________________________
> > > cups mailing list
> > > cups at easysw.com
> > > http://lists.easysw.com/mailman/listinfo/cups
> > >
> > >
> >
>





More information about the cups mailing list