Parallel Port Busy...
Neil
neiljohn at free.fr
Tue Oct 19 16:11:12 PDT 2004
After some trouble getting Mandrake 10.1 to see my parallel port, It is finally listed as /dev/lp0 and seems to be correctly configured. Parport, lp and parport_pc are loaded in modprobe.conf and configured with
alias parport_lowlevel parport_pc
options parport_pc io=0x378 irq=7
which corresponds to my BIOS config.
however /usr/lib/cups/backend/parallel gives a reference to dev/unknown...:
direct parallel:/dev/unknown-parallel0 "HEWLETT-PACKARD DESKJET 710C" "Parallel Port #1"
and cat /proc/sys/dev/parport/parport0/autoprobe gives:
CLASS:PRINTER;
MODEL:DESKJET 710C;
MANUFACTURER:HEWLETT-PACKARD;
DESCRIPTION:Hewlett-Packard DeskJet 710 Series;
COMMAND SET:SCP,VLINK;
[root at localhost jazzman]#
However, Jobviewer always says "processing...", and CUPS config always says the printer is on dev/lp0 and says "Parallel port busy, trying again in 30 seconds..."
Does anyone have any ideas what could be wrong here?
Thanks in advance,
Neil
neiljohn(at)free.fr
More information about the cups
mailing list