cups with Lexmark Z11-No printing
loiclolosuperlolo at yahoo.fr
loiclolosuperlolo at yahoo.fr
Wed Oct 13 06:49:27 PDT 2004
Hello,
I install cups on a debian version testing/unstable for my Lexmark Z11
apt-get install cupsys cupsomatic-ppd
apt-get install cupsys-bsd cupsys-driver-gimprint
After, I started mozilla on http://localhost:631 and I added my printer. It says that all was fine. I tried to print a test page but nothing happened. I look into /var/log/cups/error_log and I find this error:
I [03/Oct/2004:20:25:33 +0200] Adding start banner page "none" to job 7.
I [03/Oct/2004:20:25:33 +0200] Adding end banner page "none" to job 7.
I [03/Oct/2004:20:25:33 +0200] Job 7 queued on 'superlex' by 'root'.
I [03/Oct/2004:20:25:33 +0200] Started filter /usr/lib/cups/filter/pstops (PID 2
166) for job 7.
I [03/Oct/2004:20:25:33 +0200] Started filter /usr/lib/cups/filter/foomatic-rip
(PID 2167) for job 7.
I [03/Oct/2004:20:25:33 +0200] Started backend /usr/lib/cups/backend/parallel (P
ID 2168) for job 7.
E [03/Oct/2004:20:25:35 +0200] PID 2167 stopped with status 1!
I [03/Oct/2004:20:25:35 +0200] Hint: Try setting the LogLevel to "debug" to find
out more.
It seems that it's foomatic-rip that doesn't work but what else ??
I try to install another printer on the same computer, a HP 610C with CUPS. It works without any problem.
I put the Loglevel to "debug" as said in the first log. When I tried to print, this is my /var/log/cups/error_log:
D [09/Oct/2004:13:18:59 +0200] [Job 2] 0 %%Page: 1 1
D [09/Oct/2004:13:18:59 +0200] [Job 2] 0 %%Page: 1 1
D [09/Oct/2004:13:18:59 +0200] [Job 2] pw = 595.0, pl = 842.0
D [09/Oct/2004:13:18:59 +0200] [Job 2] PageLeft = 0.0, PageRight = 595.0
D [09/Oct/2004:13:18:59 +0200] [Job 2] PageTop = 842.0, PageBottom = 0.0
D [09/Oct/2004:13:18:59 +0200] [Job 2] PageWidth = 595.0, PageLength = 842.0
D [09/Oct/2004:13:18:59 +0200] [Job 2] perl: warning: Setting locale failed.
D [09/Oct/2004:13:18:59 +0200] [Job 2] perl: warning: Please check that your locale settings:
D [09/Oct/2004:13:18:59 +0200] [Job 2] LANGUAGE = (unset),
D [09/Oct/2004:13:18:59 +0200] [Job 2] LC_ALL = (unset),
D [09/Oct/2004:13:18:59 +0200] [Job 2] LANG = "fr"
D [09/Oct/2004:13:18:59 +0200] [Job 2] are supported and installed on your system.
D [09/Oct/2004:13:18:59 +0200] [Job 2] perl: warning: Falling back to the standard locale ("C").
D [09/Oct/2004:13:19:00 +0200] [Job 2] foomatic-rip version $Revision: 3.43.2.6 $ running...
D [09/Oct/2004:13:19:00 +0200] [Job 2] Parsing PPD file ...
D [09/Oct/2004:13:19:00 +0200] [Job 2] *cupsFilter: "application/vnd.cups-postscript 0 foomatic-rip"
D [09/Oct/2004:13:19:00 +0200] [Job 2] Added option ColorSpace
D [09/Oct/2004:13:19:00 +0200] [Job 2] Added option PageSize
D [09/Oct/2004:13:19:00 +0200] [Job 2] Added option PageRegion
D [09/Oct/2004:13:19:00 +0200] [Job 2] Added option ImageableArea
D [09/Oct/2004:13:19:00 +0200] [Job 2] Added option PaperDimension
D [09/Oct/2004:13:19:00 +0200] [Job 2] Added option InkType
D [09/Oct/2004:13:19:00 +0200] [Job 2] Added option InkSaving
D [09/Oct/2004:13:19:00 +0200] [Job 2] Added option ResX
D [09/Oct/2004:13:19:00 +0200] [Job 2] Added option ResY
D [09/Oct/2004:13:19:00 +0200] [Job 2] Added option Font
D [09/Oct/2004:13:19:00 +0200] [Job 2]
D [09/Oct/2004:13:19:00 +0200] [Job 2] Parameter Summary
D [09/Oct/2004:13:19:00 +0200] [Job 2] -----------------
D [09/Oct/2004:13:19:00 +0200] [Job 2]
D [09/Oct/2004:13:19:00 +0200] [Job 2] Spooler: cups
D [09/Oct/2004:13:19:00 +0200] [Job 2] Printer: lexmark
D [09/Oct/2004:13:19:00 +0200] [Job 2] PPD file: /etc/cups/ppd/lexmark.ppd
D [09/Oct/2004:13:19:00 +0200] [Job 2] Printer model: Lexmark Z11 Foomatic/lz11 (recommended)
D [09/Oct/2004:13:19:00 +0200] [Job 2] Job title: Test Page
D [09/Oct/2004:13:19:00 +0200] [Job 2] File(s) to be printed:
D [09/Oct/2004:13:19:00 +0200] [Job 2] <STDIN>
D [09/Oct/2004:13:19:00 +0200] [Job 2]
D [09/Oct/2004:13:19:00 +0200] [Job 2]
D [09/Oct/2004:13:19:00 +0200] [Job 2] ================================================
D [09/Oct/2004:13:19:00 +0200] [Job 2]
D [09/Oct/2004:13:19:00 +0200] [Job 2] File: <STDIN>
D [09/Oct/2004:13:19:00 +0200] [Job 2]
D [09/Oct/2004:13:19:00 +0200] [Job 2] ================================================
D [09/Oct/2004:13:19:00 +0200] [Job 2]
D [09/Oct/2004:13:19:00 +0200] [Job 2] Reading PostScript input ...
D [09/Oct/2004:13:19:00 +0200] [Job 2] --> This document is DSC-conforming!
D [09/Oct/2004:13:19:00 +0200] [Job 2]
D [09/Oct/2004:13:19:00 +0200] [Job 2] -----------
D [09/Oct/2004:13:19:00 +0200] [Job 2] Found: %%BeginProlog
D [09/Oct/2004:13:19:00 +0200] [Job 2] 0 %%EOF
D [09/Oct/2004:13:19:00 +0200] [Job 2] Saw EOF!
D [09/Oct/2004:13:19:00 +0200] [Job 2] Found: %%EndProlog
D [09/Oct/2004:13:19:00 +0200] [Job 2]
D [09/Oct/2004:13:19:00 +0200] [Job 2] -----------
D [09/Oct/2004:13:19:00 +0200] [Job 2] Found: %%BeginSetup
D [09/Oct/2004:13:19:00 +0200] [Job 2] Inserting PostScript code for CUPS' page accounting
D [09/Oct/2004:13:19:00 +0200] [Job 2] Found: %%BeginFeature: *PageSize A4
D [09/Oct/2004:13:19:00 +0200] [Job 2] Option: PageSize=A4 --> Setting option
D [09/Oct/2004:13:19:00 +0200] [Job 2] Found: %% FoomaticRIPOptionSetting: PageSize=A4
D [09/Oct/2004:13:19:00 +0200] [Job 2] Option: PageSize=A4 --> Setting option
D [09/Oct/2004:13:19:00 +0200] [Job 2] Found: %%BeginFeature: *InkType Black
D [09/Oct/2004:13:19:00 +0200] [Job 2] Option: InkType=Black --> Setting option
D [09/Oct/2004:13:19:00 +0200] [Job 2] Found: %% FoomaticRIPOptionSetting: InkType=Black
D [09/Oct/2004:13:19:00 +0200] [Job 2] Option: InkType=Black --> Setting option
D [09/Oct/2004:13:19:00 +0200] [Job 2] Found: %%BeginFeature: *InkSaving 1
D [09/Oct/2004:13:19:00 +0200] [Job 2] Option: InkSaving=1 --> Setting option
D [09/Oct/2004:13:19:00 +0200] [Job 2] Found: %% FoomaticRIPOptionSetting: InkSaving=1
D [09/Oct/2004:13:19:00 +0200] [Job 2] Option: InkSaving=1 --> Setting option
D [09/Oct/2004:13:19:00 +0200] [Job 2] Found: %%BeginFeature: *ResX 582
D [09/Oct/2004:13:19:00 +0200] [Job 2] Option: ResX=582 --> Setting option
D [09/Oct/2004:13:19:00 +0200] [Job 2] Found: %% FoomaticRIPOptionSetting: ResX=582
D [09/Oct/2004:13:19:00 +0200] [Job 2] Option: ResX=582 --> Setting option
D [09/Oct/2004:13:19:00 +0200] [Job 2] Found: %%BeginFeature: *ResY 582
D [09/Oct/2004:13:19:00 +0200] [Job 2] Option: ResY=582 --> Setting option
D [09/Oct/2004:13:19:00 +0200] [Job 2] Found: %% FoomaticRIPOptionSetting: ResY=582
D [09/Oct/2004:13:19:00 +0200] [Job 2] Option: ResY=582 --> Setting option
D [09/Oct/2004:13:19:00 +0200] [Job 2] Found: %%EndSetup
D [09/Oct/2004:13:19:00 +0200] [Job 2]
D [09/Oct/2004:13:19:00 +0200] [Job 2] -----------
D [09/Oct/2004:13:19:00 +0200] [Job 2] New page: 1 1
D [09/Oct/2004:13:19:00 +0200] [Job 2] Inserting option code into "PageSetup" section.
D [09/Oct/2004:13:19:00 +0200] [Job 2] No page header or page header not DSC-conforming
D [09/Oct/2004:13:19:00 +0200] [Job 2] Stopping search for page header options
D [09/Oct/2004:13:19:00 +0200] [Job 2] Found:
D [09/Oct/2004:13:19:00 +0200] [Job 2] pageHeight sub % Move down...
D [09/Oct/2004:13:19:00 +0200] [Job 2] --> Output goes directly to the renderer now.
D [09/Oct/2004:13:19:00 +0200] [Job 2]
D [09/Oct/2004:13:19:00 +0200] [Job 2]
D [09/Oct/2004:13:19:00 +0200] [Job 2] Starting renderer
D [09/Oct/2004:13:19:00 +0200] [Job 2] JCL: <job data>
D [09/Oct/2004:13:19:00 +0200] [Job 2]
D [09/Oct/2004:13:19:00 +0200] [Job 2] renderer PID kid4=13256
D [09/Oct/2004:13:19:00 +0200] [Job 2] renderer command: lz11.foomatic --papersize=a4 --color=0 --inksaving=1 --resx=582 --resy=582
D [09/Oct/2004:13:19:00 +0200] [Job 2] renderer return value: 16777215
D [09/Oct/2004:13:19:00 +0200] [Job 2] renderer received signal: 16777215
D [09/Oct/2004:13:19:00 +0200] [Job 2] tail process done writing data to STDOUT
D [09/Oct/2004:13:19:00 +0200] [Job 2] KID4 finished
D [09/Oct/2004:13:19:00 +0200] [Job 2] Process dying with "The renderer command line returned an unrecognized error code 16777215.", exit stat: 1
D [09/Oct/2004:13:19:00 +0200] [Job 2] The renderer command line returned an unrecognized error code 16777215.
D [09/Oct/2004:13:19:00 +0200] [Job 2]
D [09/Oct/2004:13:19:00 +0200] [Job 2] Closing renderer
D [09/Oct/2004:13:19:00 +0200] [Job 2] KID4 exited with status 0
D [09/Oct/2004:13:19:00 +0200] [Job 2] KID3 exited with status 1
D [09/Oct/2004:13:19:00 +0200] [Job 2] Renderer exit stat: 1
D [09/Oct/2004:13:19:00 +0200] [Job 2] Renderer process finished
D [09/Oct/2004:13:19:00 +0200] [Job 2] Killing process 13255 (KID3)
D [09/Oct/2004:13:19:00 +0200] [Job 2] Process dying with "Error closing renderer", exit stat: 1
D [09/Oct/2004:13:19:00 +0200] [Job 2] Error closing renderer
E [09/Oct/2004:13:19:00 +0200] PID 13253 stopped with status 1!
D [09/Oct/2004:13:19:00 +0200] UpdateJob: job 2, file 0 is complete.
D [09/Oct/2004:13:19:01 +0200] CancelJob: id = 2
D [09/Oct/2004:13:19:01 +0200] StopJob: id = 2, force = 0
D [09/Oct/2004:13:19:01 +0200] StopJob: printer state is 3In the first log, It says that I must put the Loglevel to "debug" for more details:
I do it in /etc/cups/cupsd.conf. Now this is the end of my /var/log/cups/error_log when I try to print:
D [09/Oct/2004:13:18:59 +0200] [Job 2] 0 %%Page: 1 1
D [09/Oct/2004:13:18:59 +0200] [Job 2] 0 %%Page: 1 1
D [09/Oct/2004:13:18:59 +0200] [Job 2] pw = 595.0, pl = 842.0
D [09/Oct/2004:13:18:59 +0200] [Job 2] PageLeft = 0.0, PageRight = 595.0
D [09/Oct/2004:13:18:59 +0200] [Job 2] PageTop = 842.0, PageBottom = 0.0
D [09/Oct/2004:13:18:59 +0200] [Job 2] PageWidth = 595.0, PageLength = 842.0
D [09/Oct/2004:13:18:59 +0200] [Job 2] perl: warning: Setting locale failed.
D [09/Oct/2004:13:18:59 +0200] [Job 2] perl: warning: Please check that your locale settings:
D [09/Oct/2004:13:18:59 +0200] [Job 2] LANGUAGE = (unset),
D [09/Oct/2004:13:18:59 +0200] [Job 2] LC_ALL = (unset),
D [09/Oct/2004:13:18:59 +0200] [Job 2] LANG = "fr"
D [09/Oct/2004:13:18:59 +0200] [Job 2] are supported and installed on your system.
D [09/Oct/2004:13:18:59 +0200] [Job 2] perl: warning: Falling back to the standard locale ("C").
D [09/Oct/2004:13:19:00 +0200] [Job 2] foomatic-rip version $Revision: 3.43.2.6 $ running...
D [09/Oct/2004:13:19:00 +0200] [Job 2] Parsing PPD file ...
D [09/Oct/2004:13:19:00 +0200] [Job 2] *cupsFilter: "application/vnd.cups-postscript 0 foomatic-rip"
D [09/Oct/2004:13:19:00 +0200] [Job 2] Added option ColorSpace
D [09/Oct/2004:13:19:00 +0200] [Job 2] Added option PageSize
D [09/Oct/2004:13:19:00 +0200] [Job 2] Added option PageRegion
D [09/Oct/2004:13:19:00 +0200] [Job 2] Added option ImageableArea
D [09/Oct/2004:13:19:00 +0200] [Job 2] Added option PaperDimension
D [09/Oct/2004:13:19:00 +0200] [Job 2] Added option InkType
D [09/Oct/2004:13:19:00 +0200] [Job 2] Added option InkSaving
D [09/Oct/2004:13:19:00 +0200] [Job 2] Added option ResX
D [09/Oct/2004:13:19:00 +0200] [Job 2] Added option ResY
D [09/Oct/2004:13:19:00 +0200] [Job 2] Added option Font
D [09/Oct/2004:13:19:00 +0200] [Job 2]
D [09/Oct/2004:13:19:00 +0200] [Job 2] Parameter Summary
D [09/Oct/2004:13:19:00 +0200] [Job 2] -----------------
D [09/Oct/2004:13:19:00 +0200] [Job 2]
D [09/Oct/2004:13:19:00 +0200] [Job 2] Spooler: cups
D [09/Oct/2004:13:19:00 +0200] [Job 2] Printer: lexmark
D [09/Oct/2004:13:19:00 +0200] [Job 2] PPD file: /etc/cups/ppd/lexmark.ppd
D [09/Oct/2004:13:19:00 +0200] [Job 2] Printer model: Lexmark Z11 Foomatic/lz11 (recommended)
D [09/Oct/2004:13:19:00 +0200] [Job 2] Job title: Test Page
D [09/Oct/2004:13:19:00 +0200] [Job 2] File(s) to be printed:
D [09/Oct/2004:13:19:00 +0200] [Job 2] <STDIN>
D [09/Oct/2004:13:19:00 +0200] [Job 2]
D [09/Oct/2004:13:19:00 +0200] [Job 2]
D [09/Oct/2004:13:19:00 +0200] [Job 2] ================================================
D [09/Oct/2004:13:19:00 +0200] [Job 2]
D [09/Oct/2004:13:19:00 +0200] [Job 2] File: <STDIN>
D [09/Oct/2004:13:19:00 +0200] [Job 2]
D [09/Oct/2004:13:19:00 +0200] [Job 2] ================================================
D [09/Oct/2004:13:19:00 +0200] [Job 2]
D [09/Oct/2004:13:19:00 +0200] [Job 2] Reading PostScript input ...
D [09/Oct/2004:13:19:00 +0200] [Job 2] --> This document is DSC-conforming!
D [09/Oct/2004:13:19:00 +0200] [Job 2]
D [09/Oct/2004:13:19:00 +0200] [Job 2] -----------
D [09/Oct/2004:13:19:00 +0200] [Job 2] Found: %%BeginProlog
D [09/Oct/2004:13:19:00 +0200] [Job 2] 0 %%EOF
D [09/Oct/2004:13:19:00 +0200] [Job 2] Saw EOF!
D [09/Oct/2004:13:19:00 +0200] [Job 2] Found: %%EndProlog
D [09/Oct/2004:13:19:00 +0200] [Job 2]
D [09/Oct/2004:13:19:00 +0200] [Job 2] -----------
D [09/Oct/2004:13:19:00 +0200] [Job 2] Found: %%BeginSetup
D [09/Oct/2004:13:19:00 +0200] [Job 2] Inserting PostScript code for CUPS' page accounting
D [09/Oct/2004:13:19:00 +0200] [Job 2] Found: %%BeginFeature: *PageSize A4
D [09/Oct/2004:13:19:00 +0200] [Job 2] Option: PageSize=A4 --> Setting option
D [09/Oct/2004:13:19:00 +0200] [Job 2] Found: %% FoomaticRIPOptionSetting: PageSize=A4
D [09/Oct/2004:13:19:00 +0200] [Job 2] Option: PageSize=A4 --> Setting option
D [09/Oct/2004:13:19:00 +0200] [Job 2] Found: %%BeginFeature: *InkType Black
D [09/Oct/2004:13:19:00 +0200] [Job 2] Option: InkType=Black --> Setting option
D [09/Oct/2004:13:19:00 +0200] [Job 2] Found: %% FoomaticRIPOptionSetting: InkType=Black
D [09/Oct/2004:13:19:00 +0200] [Job 2] Option: InkType=Black --> Setting option
D [09/Oct/2004:13:19:00 +0200] [Job 2] Found: %%BeginFeature: *InkSaving 1
D [09/Oct/2004:13:19:00 +0200] [Job 2] Option: InkSaving=1 --> Setting option
D [09/Oct/2004:13:19:00 +0200] [Job 2] Found: %% FoomaticRIPOptionSetting: InkSaving=1
D [09/Oct/2004:13:19:00 +0200] [Job 2] Option: InkSaving=1 --> Setting option
D [09/Oct/2004:13:19:00 +0200] [Job 2] Found: %%BeginFeature: *ResX 582
D [09/Oct/2004:13:19:00 +0200] [Job 2] Option: ResX=582 --> Setting option
D [09/Oct/2004:13:19:00 +0200] [Job 2] Found: %% FoomaticRIPOptionSetting: ResX=582
D [09/Oct/2004:13:19:00 +0200] [Job 2] Option: ResX=582 --> Setting option
D [09/Oct/2004:13:19:00 +0200] [Job 2] Found: %%BeginFeature: *ResY 582
D [09/Oct/2004:13:19:00 +0200] [Job 2] Option: ResY=582 --> Setting option
D [09/Oct/2004:13:19:00 +0200] [Job 2] Found: %% FoomaticRIPOptionSetting: ResY=582
D [09/Oct/2004:13:19:00 +0200] [Job 2] Option: ResY=582 --> Setting option
D [09/Oct/2004:13:19:00 +0200] [Job 2] Found: %%EndSetup
D [09/Oct/2004:13:19:00 +0200] [Job 2]
D [09/Oct/2004:13:19:00 +0200] [Job 2] -----------
D [09/Oct/2004:13:19:00 +0200] [Job 2] New page: 1 1
D [09/Oct/2004:13:19:00 +0200] [Job 2] Inserting option code into "PageSetup" section.
D [09/Oct/2004:13:19:00 +0200] [Job 2] No page header or page header not DSC-conforming
D [09/Oct/2004:13:19:00 +0200] [Job 2] Stopping search for page header options
D [09/Oct/2004:13:19:00 +0200] [Job 2] Found:
D [09/Oct/2004:13:19:00 +0200] [Job 2] pageHeight sub % Move down...
D [09/Oct/2004:13:19:00 +0200] [Job 2] --> Output goes directly to the renderer now.
D [09/Oct/2004:13:19:00 +0200] [Job 2]
D [09/Oct/2004:13:19:00 +0200] [Job 2]
D [09/Oct/2004:13:19:00 +0200] [Job 2] Starting renderer
D [09/Oct/2004:13:19:00 +0200] [Job 2] JCL: <job data>
D [09/Oct/2004:13:19:00 +0200] [Job 2]
D [09/Oct/2004:13:19:00 +0200] [Job 2] renderer PID kid4=13256
D [09/Oct/2004:13:19:00 +0200] [Job 2] renderer command: lz11.foomatic --papersize=a4 --color=0 --inksaving=1 --resx=582 --resy=582
D [09/Oct/2004:13:19:00 +0200] [Job 2] renderer return value: 16777215
D [09/Oct/2004:13:19:00 +0200] [Job 2] renderer received signal: 16777215
D [09/Oct/2004:13:19:00 +0200] [Job 2] tail process done writing data to STDOUT
D [09/Oct/2004:13:19:00 +0200] [Job 2] KID4 finished
D [09/Oct/2004:13:19:00 +0200] [Job 2] Process dying with "The renderer command line returned an unrecognized error code 16777215.", exit stat: 1
D [09/Oct/2004:13:19:00 +0200] [Job 2] The renderer command line returned an unrecognized error code 16777215.
D [09/Oct/2004:13:19:00 +0200] [Job 2]
D [09/Oct/2004:13:19:00 +0200] [Job 2] Closing renderer
D [09/Oct/2004:13:19:00 +0200] [Job 2] KID4 exited with status 0
D [09/Oct/2004:13:19:00 +0200] [Job 2] KID3 exited with status 1
D [09/Oct/2004:13:19:00 +0200] [Job 2] Renderer exit stat: 1
D [09/Oct/2004:13:19:00 +0200] [Job 2] Renderer process finished
D [09/Oct/2004:13:19:00 +0200] [Job 2] Killing process 13255 (KID3)
D [09/Oct/2004:13:19:00 +0200] [Job 2] Process dying with "Error closing renderer", exit stat: 1
D [09/Oct/2004:13:19:00 +0200] [Job 2] Error closing renderer
E [09/Oct/2004:13:19:00 +0200] PID 13253 stopped with status 1!
D [09/Oct/2004:13:19:00 +0200] UpdateJob: job 2, file 0 is complete.
D [09/Oct/2004:13:19:01 +0200] CancelJob: id = 2
D [09/Oct/2004:13:19:01 +0200] StopJob: id = 2, force = 0
D [09/Oct/2004:13:19:01 +0200] StopJob: printer state is 3
I don't know where is the problem, if you can help me ...
Thanks,
Loïc
More information about the cups
mailing list