Same CUPS version with different results

[angelb at bugarin.us]

Same CUPS version running on the same type of hardware and os level
but different results are different.

Both systems have the same client.conf and cupsd.conf. Running diff against each other does not show any differences.

Both system have the same primary CUPS server and are polling the same two servers.


SAPTI01
-------
sapti01f:./cups1123> oslevel -r
5200-04

sapti01f:./bin> ./cups-config --version
1.1.23

sapti01f: lpstat -p
...
printer wi0f at 172.21.104.124 is idle.  enabled since Jan 01 00:00
printer wi0f at stlpr500 is idle.  enabled since Jan 01 00:00
printer wi0g at 172.21.104.124 is idle.  enabled since Jan 01 00:00
printer wi0g at stlpr500 is idle.  enabled since Jan 01 00:00
printer wy07 at 172.21.104.124 is idle.  enabled since Jan 01 00:00
printer wy07 at stlpr500 is idle.  enabled since Jan 01 00:00
printer y_cc8dl at 172.21.104.124 is idle.  enabled since Jan 01 00:00
printer y_cc8dl at stlpr500 is idle.  enabled since Jan 01 00:00
printer ysdpo1l at 172.21.104.124 is idle.  enabled since Jan 01 00:00
printer ysdpo1l at stlpr500 is idle.  enabled since Jan 01 00:00

sapti01f:./cups1123> tail -10 printcap
wi0f at 172.21.104.124|ZHP4100:rm=sapti01f:rp=wi0f at 172.21.104.124:
wi0f at stlpr500|ZHP4100:rm=sapti01f:rp=wi0f at stlpr500:
wi0g at 172.21.104.124|HPLJIIID:rm=sapti01f:rp=wi0g at 172.21.104.124:
wi0g at stlpr500|HPLJIIID:rm=sapti01f:rp=wi0g at stlpr500:
wy07 at 172.21.104.124|HPLJ4:rm=sapti01f:rp=wy07 at 172.21.104.124:
wy07 at stlpr500|HPLJ4:rm=sapti01f:rp=wy07 at stlpr500:
y_cc8dl at 172.21.104.124|HPLJ4:rm=sapti01f:rp=y_cc8dl at 172.21.104.124:
y_cc8dl at stlpr500|HPLJ4:rm=sapti01f:rp=y_cc8dl at stlpr500:
ysdpo1l at 172.21.104.124|HPLJ4:rm=sapti01f:rp=ysdpo1l at 172.21.104.124:
ysdpo1l at stlpr500|ysdpo1l at stlpr500:rm=sapti01f:rp=ysdpo1l at stlpr500:

sapti01f:./cups1123> lpstat -py_cc8dl
lpstat: Unknown destination "y_cc8dl"!

sapti01f:./cups1123> lpstat -py_cc8dl at stlpr500
printer y_cc8dl at stlpr500 is idle.  enabled since Jan 01 00:00


SAPTI02
-------
$ oslevel -r
5200-04

$ ./cups-config --version
1.1.23

$ lpstat -p
...
wi0f accepting requests since Jan 01 00:00
wi0g accepting requests since Jan 01 00:00
wy07 accepting requests since Jan 01 00:00
y_cc8dl accepting requests since Jan 01 00:00
ysdpo1l accepting requests since Jan 01 00:00

$ tail -10 printcap
wi0a|HPLJ4:rm=sapti02:rp=wi0a:
wi0b|HPLJ4:rm=sapti02:rp=wi0b:
wi0c|HPLJ4:rm=sapti02:rp=wi0c:
wi0d|HPLJ4000:rm=sapti02:rp=wi0d:
wi0e|HPLJ4:rm=sapti02:rp=wi0e:
wi0f|ZHP4100:rm=sapti02:rp=wi0f:
wi0g|HPLJIIID:rm=sapti02:rp=wi0g:
wy07|HPLJ4:rm=sapti02:rp=wy07:
y_cc8dl|HPLJ4:rm=sapti02:rp=y_cc8dl:
ysdpo1l|ysdpo1l:rm=sapti02:rp=ysdpo1l:

$ lpstat -py_cc8dl
printer y_cc8dl is idle.  enabled since Jan 01 00:00


I wouldn't have mind if they were different except that with SAPTI01, I can't print without using the entire printer name/servername combination; y_cc8dl at stlpr500. Using it this way breaks a lot of the applications that references the printer queue as "y_cc8dl".

Is there anyway to fix this on SAPTI01?

Any suggestion is much appreicated.

Thanks,
Angel