[cups.general] CUPS printing problem

Thu Aug 4 17:12:05 PDT 2005

A follow up to the below described problem. I've been working on it, and
it seems really Cups is at least partly, if not fully to blame.
- when rebooting the computer, I can print. Works fine. I managed to run
a whole lot of print jobs, which I queued while there was still a job in
progress. They were all printed.
- Cups for some reason does not give a form feed at the end of the page:
the page stays stuck in the printer, finished printing, waiting for the
next page to be printed. Then a form feed is apparently given as the
previous page comes out, and a new page is fed.
- When all the jobs were done, the last form feed was not given (I could
of course pull out the page by hand, but that's not how it's supposed to
be), and the activity led of the printer continued to flash.

Some hours later I wanted to print some more, now the below problem
occurred - WITHOUT power cycling the printer!

After power cycling the printer, Cups did not work either. But:
- mtink tool (a ink level monitor tool) worked just fine. So the USB
does communicate with the printer.
- scanning works as well: the same device (it's a scanner/printer
combi).
Therefor I have to conclude that my USB is working correctly, and that
cups is at fault.

Any idea what's wrong? Should I open a bug (if so: where?)? Any more
info needed?

Wouter.

On Thu, 2005-07-28 at 08:20 -0400, Helge Blischke wrote: 

> > Wouter van Marle wrote:
> > 
> > Hi all,
> > 
> > I've a very irritating problem printing with CUPS.
> > When I switch on computer and printer, I can print, however if I switch off the printer and later on again, without rebooting the computer, it doesn't work anymore and I get printing errors.
> > O/S: Linux Mandrake 10.2 (2005 Limited Edition), with all updates as of today.
> > Printer: Epson Stylus CX3500 (works nicely as CX3200), USB.
> > 
> > The log that I get with loglevel debug:
> > D [20/Jul/2005:21:49:05 +0800] AcceptClient: 5 from localhost:631.
> > D [20/Jul/2005:21:49:05 +0800] ReadClient: 5 POST / HTTP/1.1
> > D [20/Jul/2005:21:49:05 +0800] ProcessIPPRequest: 5 status_code=1
> > D [20/Jul/2005:21:49:05 +0800] ReadClient: 5 POST / HTTP/1.1
> > D [20/Jul/2005:21:49:05 +0800] ProcessIPPRequest: 5 status_code=1
> > D [20/Jul/2005:21:49:05 +0800] ReadClient: 5 POST / HTTP/1.1
> > D [20/Jul/2005:21:49:05 +0800] ProcessIPPRequest: 5 status_code=0
> > D [20/Jul/2005:21:49:05 +0800] CloseClient: 5
> > D [20/Jul/2005:21:49:05 +0800] AcceptClient: 5 from localhost:631.
> > D [20/Jul/2005:21:49:05 +0800] ReadClient: 5 POST /printers/EPSONSCX3200 HTTP/1.1
> > D [20/Jul/2005:21:49:05 +0800] print_job: auto-typing file...
> > D [20/Jul/2005:21:49:05 +0800] print_job: request file type is application/postscript.
> > D [20/Jul/2005:21:49:05 +0800] check_quotas: requesting-user-name = 'root'
> > D [20/Jul/2005:21:49:05 +0800] print_job: requesting-user-name = 'root'
> > I [20/Jul/2005:21:49:05 +0800] Adding start banner page "none" to job 7.
> > I [20/Jul/2005:21:49:05 +0800] Adding end banner page "none" to job 7.
> > I [20/Jul/2005:21:49:05 +0800] Job 7 queued on 'EPSONSCX3200' by 'root'.
> > D [20/Jul/2005:21:49:05 +0800] Job 7 hold_until = 0
> > D [20/Jul/2005:21:49:05 +0800] StartJob(7, 0x80b1400)
> > D [20/Jul/2005:21:49:05 +0800] StartJob() id = 7, file = 0/1
> > D [20/Jul/2005:21:49:05 +0800] job-sheets=none,none
> > D [20/Jul/2005:21:49:05 +0800] banner_page = 0
> > D [20/Jul/2005:21:49:05 +0800] StartJob: argv = "EPSONSCX3200","7","root","testprint.ps","1","page-top=36 page-bottom=36 page-left=36 page-right=36 cpi=12 lpi=7 wrap scaling=100","/var/spool/cups/d00007-001"
> > D [20/Jul/2005:21:49:05 +0800] StartJob: envp[0]="PATH=/usr/lib/cups/filter:/bin:/usr/bin"
> > D [20/Jul/2005:21:49:05 +0800] StartJob: envp[1]="SOFTWARE=CUPS/1.1"
> > D [20/Jul/2005:21:49:05 +0800] StartJob: envp[2]="USER=root"
> > D [20/Jul/2005:21:49:05 +0800] StartJob: envp[3]="CHARSET=utf-8"
> > D [20/Jul/2005:21:49:05 +0800] StartJob: envp[4]="LANG=en"
> > D [20/Jul/2005:21:49:05 +0800] StartJob: envp[5]="PPD=/etc/cups/ppd/EPSONSCX3200.ppd"
> > D [20/Jul/2005:21:49:05 +0800] StartJob: envp[6]="CUPS_SERVERROOT=/etc/cups"
> > D [20/Jul/2005:21:49:05 +0800] StartJob: envp[7]="RIP_MAX_CACHE=8m"
> > D [20/Jul/2005:21:49:05 +0800] StartJob: envp[8]="TMPDIR=/var/spool/cups/tmp"
> > D [20/Jul/2005:21:49:05 +0800] StartJob: envp[9]="CONTENT_TYPE=application/postscript"
> > D [20/Jul/2005:21:49:05 +0800] StartJob: envp[10]="DEVICE_URI=usb://EPSON/Stylus%20CX3500"
> > D [20/Jul/2005:21:49:05 +0800] StartJob: envp[11]="PRINTER=EPSONSCX3200"
> > D [20/Jul/2005:21:49:05 +0800] StartJob: envp[12]="CUPS_DATADIR=/usr/share/cups"
> > D [20/Jul/2005:21:49:05 +0800] StartJob: envp[13]="CUPS_FONTPATH=/usr/share/cups/fonts"
> > D [20/Jul/2005:21:49:05 +0800] StartJob: envp[14]="CUPS_SERVER=localhost"
> > D [20/Jul/2005:21:49:05 +0800] StartJob: envp[15]="IPP_PORT=631"
> > D [20/Jul/2005:21:49:05 +0800] StartJob: envp[16]="DBUS_SESSION_BUS_ADDRESS=unix:abstract=/tmp/dbus-HyIjsnqBIx"
> > D [20/Jul/2005:21:49:05 +0800] StartJob: statusfds = [ 7 8 ]
> > D [20/Jul/2005:21:49:05 +0800] StartJob: filterfds[1] = [ 9 -1 ]
> > D [20/Jul/2005:21:49:05 +0800] StartJob: filter = "/usr/lib/cups/filter/pstops"
> > D [20/Jul/2005:21:49:05 +0800] StartJob: filterfds[0] = [ 10 11 ]
> > D [20/Jul/2005:21:49:05 +0800] start_process("/usr/lib/cups/filter/pstops", 0xbffee210, 0xbffed580, 9, 11, 8)
> > I [20/Jul/2005:21:49:05 +0800] Started filter /usr/lib/cups/filter/pstops (PID 21436) for job 7.
> > D [20/Jul/2005:21:49:05 +0800] StartJob: filter = "/usr/lib/cups/filter/foomatic-rip"
> > D [20/Jul/2005:21:49:05 +0800] StartJob: filterfds[1] = [ 9 12 ]
> > D [20/Jul/2005:21:49:05 +0800] start_process("/usr/lib/cups/filter/foomatic-rip", 0xbffee210, 0xbffed580, 10, 12, 8)
> > I [20/Jul/2005:21:49:05 +0800] Started filter /usr/lib/cups/filter/foomatic-rip (PID 21437) for job 7.
> > D [20/Jul/2005:21:49:05 +0800] StartJob: backend = "/usr/lib/cups/backend/usb"
> > D [20/Jul/2005:21:49:05 +0800] StartJob: filterfds[0] = [ -1 10 ]
> > D [20/Jul/2005:21:49:05 +0800] start_process("/usr/lib/cups/backend/usb", 0xbffee210, 0xbffed580, 9, 10, 8)
> > I [20/Jul/2005:21:49:05 +0800] Started backend /usr/lib/cups/backend/usb (PID 21438) for job 7.
> > D [20/Jul/2005:21:49:05 +0800] ProcessIPPRequest: 5 status_code=0
> > D [20/Jul/2005:21:49:05 +0800] [Job 7] Page = 595x842; 9,9 to 586,842
> > D [20/Jul/2005:21:49:05 +0800] [Job 7] slowcollate=0, slowduplex=0, sloworder=0
> > D [20/Jul/2005:21:49:05 +0800] [Job 7] 0 %%BoundingBox: 0 0 612 792
> > D [20/Jul/2005:21:49:05 +0800] [Job 7] 0 %%Pages: 1
> > D [20/Jul/2005:21:49:05 +0800] [Job 7] 0 %%LanguageLevel: 1
> > D [20/Jul/2005:21:49:05 +0800] [Job 7] 0 %%DocumentData: Clean7Bit
> > D [20/Jul/2005:21:49:05 +0800] [Job 7] 0 %%DocumentSuppliedResources: procset testprint/1.0
> > D [20/Jul/2005:21:49:05 +0800] [Job 7] 0 %%DocumentNeededResources: font Helvetica Helvetica-Bold Times-Roman
> > D [20/Jul/2005:21:49:05 +0800] [Job 7] 0 %%Creator: Michael Sweet, Easy Software Products
> > D [20/Jul/2005:21:49:05 +0800] [Job 7] 0 %%CreationDate: May 11, 1999
> > D [20/Jul/2005:21:49:05 +0800] [Job 7] 0 %%Title: Test Page
> > D [20/Jul/2005:21:49:05 +0800] [Job 7] 0 %%EndComments
> > D [20/Jul/2005:21:49:05 +0800] [Job 7] 0 %%BeginProlog
> > D [20/Jul/2005:21:49:05 +0800] [Job 7] 0 %%BeginResource procset testprint 1.1 0
> > D [20/Jul/2005:21:49:05 +0800] [Job 7] 0 %%EndResource
> > D [20/Jul/2005:21:49:05 +0800] [Job 7] 0 %%EndProlog
> > D [20/Jul/2005:21:49:05 +0800] [Job 7] 0 %%Page: 1 1
> > D [20/Jul/2005:21:49:05 +0800] [Job 7] 0 %%Page: 1 1
> > D [20/Jul/2005:21:49:05 +0800] [Job 7] pw = 523.0, pl = 770.0
> > D [20/Jul/2005:21:49:05 +0800] [Job 7] PageLeft = 36.0, PageRight = 559.0
> > D [20/Jul/2005:21:49:05 +0800] [Job 7] PageTop = 806.0, PageBottom = 36.0
> > D [20/Jul/2005:21:49:05 +0800] [Job 7] PageWidth = 595.0, PageLength = 842.0
> > D [20/Jul/2005:21:49:05 +0800] [Job 7] 0 %%BeginDocument logo-lmdk-gs6.eps
> > D [20/Jul/2005:21:49:05 +0800] [Job 7] 1 %%BoundingBox: 0 0 479 88
> > D [20/Jul/2005:21:49:05 +0800] [Job 7] 1 %%HiResBoundingBox: 0.000000 0.000000 478.230981 87.480737
> > D [20/Jul/2005:21:49:05 +0800] [Job 7] 1 %%Creator: ESP Ghostscript 707 (epswrite)
> > D [20/Jul/2005:21:49:05 +0800] [Job 7] 1 %%CreationDate: 2004/03/17 14:39:05
> > D [20/Jul/2005:21:49:05 +0800] [Job 7] 1 %%DocumentData: Clean7Bit
> > D [20/Jul/2005:21:49:05 +0800] [Job 7] 1 %%EndComments
> > D [20/Jul/2005:21:49:05 +0800] [Job 7] 1 %%BeginProlog
> > D [20/Jul/2005:21:49:05 +0800] [Job 7] 1 %%BeginResource: procset GS_epswrite_1_0_1001
> > D [20/Jul/2005:21:49:05 +0800] [Job 7] 1 %%EndResource
> > D [20/Jul/2005:21:49:05 +0800] [Job 7] 1 %%EndProlog
> > D [20/Jul/2005:21:49:05 +0800] [Job 7] 1 %%Page: 1 1
> > D [20/Jul/2005:21:49:05 +0800] [Job 7] 1 %%BeginPageSetup
> > D [20/Jul/2005:21:49:05 +0800] [Job 7] 1 %%EndPageSetup
> > D [20/Jul/2005:21:49:05 +0800] [Job 7] 1 %%PageTrailer
> > D [20/Jul/2005:21:49:05 +0800] [Job 7] 1 %%Trailer
> > D [20/Jul/2005:21:49:05 +0800] [Job 7] 1 %%Pages: 1
> > D [20/Jul/2005:21:49:05 +0800] [Job 7] 1 %%EndDocument
> > D [20/Jul/2005:21:49:05 +0800] [Job 7] 0 %%Trailer
> > D [20/Jul/2005:21:49:05 +0800] [Job 7] Saw Trailer!
> > D [20/Jul/2005:21:49:05 +0800] [Job 7] Saw EOF!
> > D [20/Jul/2005:21:49:05 +0800] CloseClient: 5
> > D [20/Jul/2005:21:49:05 +0800] [Job 7] Printer using device file "/dev/usb/lp0"...
> > D [20/Jul/2005:21:49:05 +0800] [Job 7] LPGETSTATUS returned a port status of 18...
> > D [20/Jul/2005:21:49:06 +0800] [Job 7] foomatic-rip version $Revision: 3.43.2.9 $ running...
> > D [20/Jul/2005:21:49:06 +0800] [Job 7] Parsing PPD file ...
> > D [20/Jul/2005:21:49:06 +0800] [Job 7] *cupsFilter: "application/vnd.cups-postscript 0 foomatic-rip"
> > D [20/Jul/2005:21:49:06 +0800] [Job 7] Added option ColorSpace
> > D [20/Jul/2005:21:49:06 +0800] [Job 7] Added option PageSize
> > D [20/Jul/2005:21:49:06 +0800] [Job 7] Added option PageRegion
> > D [20/Jul/2005:21:49:06 +0800] [Job 7] Added option Model
> > D [20/Jul/2005:21:49:06 +0800] [Job 7] Added option PrintoutMode
> > D [20/Jul/2005:21:49:06 +0800] [Job 7] Added option ImageableArea
> > D [20/Jul/2005:21:49:06 +0800] [Job 7] Added option PaperDimension
> > D [20/Jul/2005:21:49:06 +0800] [Job 7] Added option MediaType
> > D [20/Jul/2005:21:49:06 +0800] [Job 7] Added option InkType
> > D [20/Jul/2005:21:49:06 +0800] [Job 7] Added option stpGamma
> > D [20/Jul/2005:21:49:06 +0800] [Job 7] Added option Density
> > D [20/Jul/2005:21:49:06 +0800] [Job 7] Added option stpBrightness
> > D [20/Jul/2005:21:49:06 +0800] [Job 7] Added option stpSaturation
> > D [20/Jul/2005:21:49:06 +0800] [Job 7] Added option Contrast
> > D [20/Jul/2005:21:49:06 +0800] [Job 7] Added option Cyan
> > D [20/Jul/2005:21:49:06 +0800] [Job 7] Added option Magenta
> > D [20/Jul/2005:21:49:06 +0800] [Job 7] Added option Yellow
> > D [20/Jul/2005:21:49:06 +0800] [Job 7] Added option GSResolution
> > D [20/Jul/2005:21:49:06 +0800] [Job 7] Added option Quality
> > D [20/Jul/2005:21:49:06 +0800] [Job 7] Added option OutputType
> > D [20/Jul/2005:21:49:06 +0800] [Job 7] Added option ImageType
> > D [20/Jul/2005:21:49:06 +0800] [Job 7] Added option Dither
> > D [20/Jul/2005:21:49:06 +0800] [Job 7] Added option Font
> > D [20/Jul/2005:21:49:06 +0800] [Job 7]
> > D [20/Jul/2005:21:49:06 +0800] [Job 7] Parameter Summary
> > D [20/Jul/2005:21:49:06 +0800] [Job 7] -----------------
> > D [20/Jul/2005:21:49:06 +0800] [Job 7]
> > D [20/Jul/2005:21:49:06 +0800] [Job 7] Spooler: cups
> > D [20/Jul/2005:21:49:06 +0800] [Job 7] Printer: EPSONSCX3200
> > D [20/Jul/2005:21:49:06 +0800] [Job 7] PPD file: /etc/cups/ppd/EPSONSCX3200.ppd
> > D [20/Jul/2005:21:49:06 +0800] [Job 7] Printer model: Epson Stylus CX3200 Foomatic/gimp-print-ijs (recommended)
> > D [20/Jul/2005:21:49:06 +0800] [Job 7] Job title: testprint.ps
> > D [20/Jul/2005:21:49:06 +0800] [Job 7] File(s) to be printed:
> > D [20/Jul/2005:21:49:06 +0800] [Job 7] <STDIN>
> > D [20/Jul/2005:21:49:06 +0800] [Job 7]
> > D [20/Jul/2005:21:49:06 +0800] [Job 7] Pondering option 'page-top=36'
> > D [20/Jul/2005:21:49:06 +0800] [Job 7] Unknown option page-top=36.
> > D [20/Jul/2005:21:49:06 +0800] [Job 7] Pondering option 'page-bottom=36'
> > D [20/Jul/2005:21:49:06 +0800] [Job 7] Unknown option page-bottom=36.
> > D [20/Jul/2005:21:49:06 +0800] [Job 7] Pondering option 'page-left=36'
> > D [20/Jul/2005:21:49:06 +0800] [Job 7] Unknown option page-left=36.
> > D [20/Jul/2005:21:49:06 +0800] [Job 7] Pondering option 'page-right=36'
> > D [20/Jul/2005:21:49:06 +0800] [Job 7] Unknown option page-right=36.
> > D [20/Jul/2005:21:49:06 +0800] [Job 7] Pondering option 'cpi=12'
> > D [20/Jul/2005:21:49:06 +0800] [Job 7] Unknown option cpi=12.
> > D [20/Jul/2005:21:49:06 +0800] [Job 7] Pondering option 'lpi=7'
> > D [20/Jul/2005:21:49:06 +0800] [Job 7] Unknown option lpi=7.
> > D [20/Jul/2005:21:49:06 +0800] [Job 7] Pondering option 'wrap'
> > D [20/Jul/2005:21:49:06 +0800] [Job 7] Unknown boolean option "wrap".
> > D [20/Jul/2005:21:49:06 +0800] [Job 7] Pondering option 'scaling=100'
> > D [20/Jul/2005:21:49:06 +0800] [Job 7] Unknown option scaling=100.
> > D [20/Jul/2005:21:49:06 +0800] [Job 7]
> > D [20/Jul/2005:21:49:06 +0800] [Job 7] ================================================
> > D [20/Jul/2005:21:49:06 +0800] [Job 7]
> > D [20/Jul/2005:21:49:06 +0800] [Job 7] File: <STDIN>
> > D [20/Jul/2005:21:49:06 +0800] [Job 7]
> > D [20/Jul/2005:21:49:06 +0800] [Job 7] ================================================
> > D [20/Jul/2005:21:49:06 +0800] [Job 7]
> > D [20/Jul/2005:21:49:06 +0800] [Job 7] Reading PostScript input ...
> > D [20/Jul/2005:21:49:06 +0800] [Job 7] --> This document is DSC-conforming!
> > D [20/Jul/2005:21:49:06 +0800] [Job 7]
> > D [20/Jul/2005:21:49:06 +0800] [Job 7] -----------
> > D [20/Jul/2005:21:49:06 +0800] [Job 7] Found: %%BeginProlog
> > D [20/Jul/2005:21:49:06 +0800] [Job 7] Found: %%EndProlog
> > D [20/Jul/2005:21:49:06 +0800] [Job 7]
> > D [20/Jul/2005:21:49:06 +0800] [Job 7] -----------
> > D [20/Jul/2005:21:49:06 +0800] [Job 7] Found: %%BeginSetup
> > D [20/Jul/2005:21:49:06 +0800] [Job 7] Found: %%BeginFeature: *PrintoutMode Normal
> > D [20/Jul/2005:21:49:06 +0800] [Job 7] Option: PrintoutMode=Normal --> Setting option
> > D [20/Jul/2005:21:49:06 +0800] [Job 7] Found: %% FoomaticRIPOptionSetting: PrintoutMode=Normal
> > D [20/Jul/2005:21:49:06 +0800] [Job 7] Option: PrintoutMode=Normal --> Setting option
> > D [20/Jul/2005:21:49:06 +0800] [Job 7] Found: %%BeginFeature: *Quality FromPrintoutMode
> > D [20/Jul/2005:21:49:06 +0800] [Job 7] Option: Quality=FromPrintoutMode --> Setting option
> > D [20/Jul/2005:21:49:06 +0800] [Job 7] Found: %% FoomaticRIPOptionSetting: Quality=@PrintoutMode
> > D [20/Jul/2005:21:49:06 +0800] [Job 7] Option: Quality=FromPrintoutMode --> Setting option
> > D [20/Jul/2005:21:49:06 +0800] [Job 7] Found: %%BeginFeature: *InkType CMYK
> > D [20/Jul/2005:21:49:06 +0800] [Job 7] Option: InkType=CMYK --> Setting option
> > D [20/Jul/2005:21:49:06 +0800] [Job 7] Found: %% FoomaticRIPOptionSetting: InkType=CMYK
> > D [20/Jul/2005:21:49:06 +0800] [Job 7] Option: InkType=CMYK --> Setting option
> > D [20/Jul/2005:21:49:06 +0800] [Job 7] Found: %%BeginFeature: *PageSize A4
> > D [20/Jul/2005:21:49:06 +0800] [Job 7] Option: PageSize=A4 --> Setting option
> > D [20/Jul/2005:21:49:06 +0800] [Job 7] Found: %% FoomaticRIPOptionSetting: PageSize=A4
> > D [20/Jul/2005:21:49:06 +0800] [Job 7] Option: PageSize=A4 --> Setting option
> > D [20/Jul/2005:21:49:06 +0800] [Job 7] Found: %%BeginFeature: *MediaType Plain
> > D [20/Jul/2005:21:49:06 +0800] [Job 7] Option: MediaType=Plain --> Setting option
> > D [20/Jul/2005:21:49:06 +0800] [Job 7] Found: %% FoomaticRIPOptionSetting: MediaType=Plain
> > D [20/Jul/2005:21:49:06 +0800] [Job 7] Option: MediaType=Plain --> Setting option
> > D [20/Jul/2005:21:49:06 +0800] [Job 7] Found: %%BeginFeature: *GSResolution FromPrintoutMode
> > D [20/Jul/2005:21:49:06 +0800] [Job 7] Option: GSResolution=FromPrintoutMode --> Setting option
> > D [20/Jul/2005:21:49:06 +0800] [Job 7] Found: %% FoomaticRIPOptionSetting: GSResolution=@PrintoutMode
> > D [20/Jul/2005:21:49:06 +0800] [Job 7] Option: GSResolution=FromPrintoutMode --> Setting option
> > D [20/Jul/2005:21:49:06 +0800] [Job 7] Found: %%BeginFeature: *OutputType FromPrintoutMode
> > D [20/Jul/2005:21:49:06 +0800] [Job 7] Option: OutputType=FromPrintoutMode --> Setting option
> > D [20/Jul/2005:21:49:06 +0800] [Job 7] Found: %% FoomaticRIPOptionSetting: OutputType=@PrintoutMode
> > D [20/Jul/2005:21:49:06 +0800] [Job 7] Option: OutputType=FromPrintoutMode --> Setting option
> > D [20/Jul/2005:21:49:06 +0800] [Job 7] Found: %%BeginFeature: *Dither FromPrintoutMode
> > D [20/Jul/2005:21:49:06 +0800] [Job 7] Option: Dither=FromPrintoutMode --> Setting option
> > D [20/Jul/2005:21:49:06 +0800] [Job 7] Found: %% FoomaticRIPOptionSetting: Dither=@PrintoutMode
> > D [20/Jul/2005:21:49:06 +0800] [Job 7] Option: Dither=FromPrintoutMode --> Setting option
> > D [20/Jul/2005:21:49:06 +0800] [Job 7] Found: %%BeginFeature: *ImageType FromPrintoutMode
> > D [20/Jul/2005:21:49:06 +0800] [Job 7] Option: ImageType=FromPrintoutMode --> Setting option
> > D [20/Jul/2005:21:49:06 +0800] [Job 7] Found: %% FoomaticRIPOptionSetting: ImageType=@PrintoutMode
> > D [20/Jul/2005:21:49:06 +0800] [Job 7] Option: ImageType=FromPrintoutMode --> Setting option
> > D [20/Jul/2005:21:49:06 +0800] [Job 7] Found: %%BeginFeature: *Density 1.00
> > D [20/Jul/2005:21:49:06 +0800] [Job 7] Option: Density=1.00 --> Setting option
> > D [20/Jul/2005:21:49:06 +0800] [Job 7] Found: %% FoomaticRIPOptionSetting: Density=1.00
> > D [20/Jul/2005:21:49:06 +0800] [Job 7] Option: Density=1.00 --> Setting option
> > D [20/Jul/2005:21:49:06 +0800] [Job 7] Found: %%BeginFeature: *stpBrightness 1.00
> > D [20/Jul/2005:21:49:06 +0800] [Job 7] Option: stpBrightness=1.00 --> Setting option
> > D [20/Jul/2005:21:49:06 +0800] [Job 7] Found: %% FoomaticRIPOptionSetting: stpBrightness=1.00
> > D [20/Jul/2005:21:49:06 +0800] [Job 7] Option: stpBrightness=1.00 --> Setting option
> > D [20/Jul/2005:21:49:06 +0800] [Job 7] Found: %%BeginFeature: *stpGamma 1.00
> > D [20/Jul/2005:21:49:06 +0800] [Job 7] Option: stpGamma=1.00 --> Setting option
> > D [20/Jul/2005:21:49:06 +0800] [Job 7] Found: %% FoomaticRIPOptionSetting: stpGamma=1.00
> > D [20/Jul/2005:21:49:06 +0800] [Job 7] Option: stpGamma=1.00 --> Setting option
> > D [20/Jul/2005:21:49:06 +0800] [Job 7] Found: %%BeginFeature: *Contrast 1.00
> > D [20/Jul/2005:21:49:06 +0800] [Job 7] Option: Contrast=1.00 --> Setting option
> > D [20/Jul/2005:21:49:06 +0800] [Job 7] Found: %% FoomaticRIPOptionSetting: Contrast=1.00
> > D [20/Jul/2005:21:49:06 +0800] [Job 7] Option: Contrast=1.00 --> Setting option
> > D [20/Jul/2005:21:49:06 +0800] [Job 7] Found: %%BeginFeature: *stpSaturation 1.0
> > D [20/Jul/2005:21:49:06 +0800] [Job 7] Option: stpSaturation=1.0 --> Setting option
> > D [20/Jul/2005:21:49:06 +0800] [Job 7] Found: %% FoomaticRIPOptionSetting: stpSaturation=1.0
> > D [20/Jul/2005:21:49:06 +0800] [Job 7] Option: stpSaturation=1.0 --> Setting option
> > D [20/Jul/2005:21:49:06 +0800] [Job 7] Found: %%BeginFeature: *Cyan 1.00
> > D [20/Jul/2005:21:49:06 +0800] [Job 7] Option: Cyan=1.00 --> Setting option
> > D [20/Jul/2005:21:49:06 +0800] [Job 7] Found: %% FoomaticRIPOptionSetting: Cyan=1.00
> > D [20/Jul/2005:21:49:06 +0800] [Job 7] Option: Cyan=1.00 --> Setting option
> > D [20/Jul/2005:21:49:06 +0800] [Job 7] Found: %%BeginFeature: *Magenta 1.00
> > D [20/Jul/2005:21:49:06 +0800] [Job 7] Option: Magenta=1.00 --> Setting option
> > D [20/Jul/2005:21:49:06 +0800] [Job 7] Found: %% FoomaticRIPOptionSetting: Magenta=1.00
> > D [20/Jul/2005:21:49:06 +0800] [Job 7] Option: Magenta=1.00 --> Setting option
> > D [20/Jul/2005:21:49:06 +0800] [Job 7] Found: %%BeginFeature: *Yellow 1.00
> > D [20/Jul/2005:21:49:06 +0800] [Job 7] Option: Yellow=1.00 --> Setting option
> > D [20/Jul/2005:21:49:06 +0800] [Job 7] Found: %% FoomaticRIPOptionSetting: Yellow=1.00
> > D [20/Jul/2005:21:49:06 +0800] [Job 7] Option: Yellow=1.00 --> Setting option
> > D [20/Jul/2005:21:49:06 +0800] [Job 7] Found: %%EndSetup
> > D [20/Jul/2005:21:49:06 +0800] [Job 7] Inserting PostScript code for CUPS' page accounting
> > D [20/Jul/2005:21:49:06 +0800] [Job 7]
> > D [20/Jul/2005:21:49:06 +0800] [Job 7] -----------
> > D [20/Jul/2005:21:49:06 +0800] [Job 7] New page:  1 1
> > D [20/Jul/2005:21:49:06 +0800] [Job 7] Inserting option code into "PageSetup" section.
> > D [20/Jul/2005:21:49:06 +0800] [Job 7] No page header or page header not DSC-conforming
> > D [20/Jul/2005:21:49:06 +0800] [Job 7] Stopping search for page header options
> > D [20/Jul/2005:21:49:06 +0800] [Job 7] Found:
> > D [20/Jul/2005:21:49:06 +0800] [Job 7] pageHeight sub % Move down...
> > D [20/Jul/2005:21:49:06 +0800] [Job 7] --> Output goes directly to the renderer now.
> > D [20/Jul/2005:21:49:06 +0800] [Job 7]
> > D [20/Jul/2005:21:49:06 +0800] [Job 7]
> > D [20/Jul/2005:21:49:06 +0800] [Job 7] Starting renderer
> > D [20/Jul/2005:21:49:06 +0800] [Job 7] JCL: <job data>
> > D [20/Jul/2005:21:49:06 +0800] [Job 7]
> > D [20/Jul/2005:21:49:06 +0800] [Job 7] renderer PID kid4=21440
> > D [20/Jul/2005:21:49:06 +0800] [Job 7] renderer command: gs -q -dPARANOIDSAFER -dNOPAUSE -dBATCH -sDEVICE=ijs -sIjsServer=ijsgimpprint -dIjsUseOutputFD -sDeviceManufacturer=EPSON -sDeviceModel=escp2-cx3200 -dDEVICEWIDTHPOINTS=595
> > -dDEVICEHEIGHTPOINTS=842 -r360x360 -sProcessColorModel=DeviceRGB
> > -sIjsParams="Quality=360swuni,InkType=CMYK,MediaType=Plain,Dither=Adaptive,ImageType=2,Density=1.000000,Brightness=1.000000,Gamma=1.000000,Contrast=1.000000,Saturation=1.000000,Cyan=1.000000,Magenta=1.000000,Yellow=1.000000" -sOutputFile=- -
> > D [20/Jul/2005:21:49:06 +0800] [Job 7]
> > D [20/Jul/2005:21:49:06 +0800] [Job 7] -----------
> > D [20/Jul/2005:21:49:06 +0800] [Job 7] Found: %%BeginProlog
> > D [20/Jul/2005:21:49:06 +0800] [Job 7] Found: %%EndProlog
> > D [20/Jul/2005:21:49:06 +0800] [Job 7]
> > D [20/Jul/2005:21:49:06 +0800] [Job 7] -----------
> > D [20/Jul/2005:21:49:06 +0800] [Job 7] New page:  1 1
> > D [20/Jul/2005:21:49:06 +0800] [Job 7] Inserting option code into "PageSetup" section.
> > D [20/Jul/2005:21:49:06 +0800] [Job 7] Found:
> > D [20/Jul/2005:21:49:06 +0800] [Job 7] %%Page: 1 1
> > D [20/Jul/2005:21:49:06 +0800] [Job 7] --> Output goes to the FIFO buffer now.
> > D [20/Jul/2005:21:49:06 +0800] [Job 7]
> > D [20/Jul/2005:21:49:06 +0800] [Job 7]
> > D [20/Jul/2005:21:49:06 +0800] [Job 7] Found: %%BeginPageSetup
> > D [20/Jul/2005:21:49:06 +0800] [Job 7] Found: %%EndPageSetup
> > D [20/Jul/2005:21:49:06 +0800] [Job 7] End of page header
> > D [20/Jul/2005:21:49:06 +0800] [Job 7] Stopping search for page header options
> > D [20/Jul/2005:21:49:06 +0800] [Job 7] Found:
> > D [20/Jul/2005:21:49:06 +0800] [Job 7] -34.32 220.62 h
> > D [20/Jul/2005:21:49:06 +0800] [Job 7] --> Output goes directly to the renderer now.
> > D [20/Jul/2005:21:49:06 +0800] [Job 7]
> > D [20/Jul/2005:21:49:06 +0800] [Job 7]
> > D [20/Jul/2005:21:49:06 +0800] [Job 7] Closing renderer
> > D [20/Jul/2005:21:49:06 +0800] [Job 7] foomatic-gswrapper: gs '-dPARANOIDSAFER' '-dNOPAUSE' '-dBATCH' '-sDEVICE=ijs' '-sIjsServer=ijsgimpprint' '-dIjsUseOutputFD' '-sDeviceManufacturer=EPSON' '-sDeviceModel=escp2-cx3200' '-dDEVICEWIDTHPOINTS=595'
> > '-dDEVICEHEIGHTPOINTS=842' '-r360x360' '-sProcessColorModel=DeviceRGB'
> > '-sIjsParams=Quality=360swuni,InkType=CMYK,MediaType=Plain,Dither=Adaptive,ImageType=2,Density=1.000000,Brightness=1.000000,Gamma=1.000000,Contrast=1.000000,Saturation=1.000000,Cyan=1.000000,Magenta=1.000000,Yellow=1.000000' '-sOutputFile=/dev/fd/3'
> > '/dev/fd/0' 3>&1 1>&2
> > D [20/Jul/2005:21:49:06 +0800] [Job 7] ESP Ghostscript 815.01 (2005-03-08)
> > D [20/Jul/2005:21:49:06 +0800] [Job 7] Copyright (C) 2004 artofcode LLC, Benicia, CA.  All rights reserved.
> > D [20/Jul/2005:21:49:06 +0800] [Job 7] This software comes with NO WARRANTY: see the file PUBLIC for details.
> > D [20/Jul/2005:21:49:06 +0800] [Job 7] ESP Ghostscript 815.01: **** Could not open the file /dev/fd/3 .
> > D [20/Jul/2005:21:49:06 +0800] [Job 7] **** Unable to open the initial device, quitting.
> > D [20/Jul/2005:21:49:06 +0800] [Job 7] renderer return value: 1
> > D [20/Jul/2005:21:49:06 +0800] [Job 7] renderer received signal: 1
> > D [20/Jul/2005:21:49:06 +0800] [Job 7] Process dying with "Possible error on renderer command line or PostScript error. Check options.", exit stat: 3
> > D [20/Jul/2005:21:49:06 +0800] [Job 7] error: Illegal seek (29)
> > D [20/Jul/2005:21:49:06 +0800] [Job 7] Possible error on renderer command line or PostScript error. Check options.
> > D [20/Jul/2005:21:49:06 +0800] [Job 7] tail process done writing data to STDOUT
> > D [20/Jul/2005:21:49:06 +0800] [Job 7] KID4 finished
> > D [20/Jul/2005:21:49:06 +0800] [Job 7] KID3 exited with status 3
> > D [20/Jul/2005:21:49:06 +0800] [Job 7] Renderer exit stat: 3
> > D [20/Jul/2005:21:49:06 +0800] [Job 7] Renderer process finished
> > D [20/Jul/2005:21:49:06 +0800] [Job 7] Killing process 21439 (KID3)
> > D [20/Jul/2005:21:49:06 +0800] [Job 7] Process dying with "Error closing renderer", exit stat: 3
> > D [20/Jul/2005:21:49:06 +0800] [Job 7] error: Illegal seek (29)
> > D [20/Jul/2005:21:49:06 +0800] [Job 7] Error closing renderer
> > E [20/Jul/2005:21:49:06 +0800] PID 21437 stopped with status 3!
> > D [20/Jul/2005:21:49:06 +0800] UpdateJob: job 7, file 0 is complete.
> > D [20/Jul/2005:21:49:06 +0800] CancelJob: id = 7
> > D [20/Jul/2005:21:49:06 +0800] StopJob: id = 7, force = 0
> > D [20/Jul/2005:21:49:06 +0800] StopJob: printer state is 3
> 
> It is obviously an issue with your USB configuration. The kernel (or USB driver module)
> forgets the printer's device setting when it is switched off and does not recover from that.
> 
> Helge
> 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://lists.cups.org/pipermail/cups/attachments/20050804/9c50c7e9/attachment-0001.html>