[cups.general] Re: Queue is disabled, paused

Till Kamppeter till.kamppeter at gmx.net
Fri Aug 26 06:42:34 PDT 2005


Try this one:

http://www.linuxprinting.org/foomatic-filters/beh

Instructions are in the beginning of the file. This script allows to 
configure the behaviour on printer errors.

   Till


sevans at rutherfordglobal.com wrote:
> I'm having a similar problem, when a printer becomes jammed or something happens to the printer, the printer gets disabled even when the printer is working again. I must restart the print daemon everytime. Does anybody have any solution? I'm running Red Hat Enterprise 4
> 
> 
> Sean
> 
> 
> 
>>Hello all,
>>
>>This continues to be a problem for me.  I haven't received any advice yet, but was hoping
>>the issue simply got overlooked.  If this is not a CUPS problem, please tell me and I'll
>>stop bugging the list about it....
>>
>>Dane
>>
>>Dane Miller wrote:
>>
>>>Problem happened again today and I noticed the following line in
>>>syslog.  This was generated by the printer:
>>>Dec 14 09:43:34 library_printer.ofs  printer: connection with
>>>10.56.28.5.46520 aborted due to idle timeout
>>>
>>>At the same time, my cups server (10.56.28.5) generated this in error_log:
>>>E [09:43:34] [Job 1199] Unable to send print file to printer: Connection
>>>reset by peer
>>>E [09:43:34] PID 15705 stopped with status 1!
>>>
>>>Is this a timeout problem?
>>>
>>>Dane
>>>
>>>
>>>Dane Miller wrote:
>>>
>>>
>>>>Hello,
>>>>
>>>>Frequently a CUPS queue stops on my Debian Sarge box and jobs pile up
>>>>until the queue is enabled.  I sometimes must cancel the offending job
>>>>to enable the queue, other times a simple 'enable' works, and the
>>>>offending job prints.  I haven't found the pattern.  In every case the
>>>>error_log reports "Unable to send print file to printer: Connection
>>>>reset by peer".
>>>>
>>>>The printers are HP LaserJet 2100's. CUPS prints to them via
>>>>socket://10.56.28.xx:9100.  I have tried "HP LaserJet Series CUPS
>>>>v1.1" and "HP LaserJet 2100 Foomatic/pxlmono" configured via the web
>>>>interface (aside, are these drivers, PPDs, filters, all of the above?).
>>>>
>>>>This topic has come up recently:
>>>>http://www.cups.org/newsgroups.php?s2400+gcups.general+Gcups+v2403
>>>>http://www.cups.org/newsgroups.php?s2490+gcups.general+Gcups+v2497
>>>>
>>>>Here are error logs with trimmed timestamps to fit email width.  I've
>>>>also included links to the full debug level output.
>>>>
>>>>JOB 1122 - HP LaserJet 2100 Foomatic/pxlmono
>>>>http://olneyfriends.org/cupserrors/debug_error_log_job1122.txt (full
>>>>debug output)
>>>>I [11:51:13] Adding start banner page "none" to job 1122.
>>>>I [11:51:13] Adding end banner page "none" to job 1122.
>>>>I [11:51:13] Job 1122 queued on 'classroom_lab' by 'auwimbam'.
>>>>I [11:51:14] Started filter /usr/lib/cups/filter/pstops (PID 10468)
>>>>for job 1122.
>>>>I [11:51:14] Started filter /usr/lib/cups/filter/foomatic-rip (PID
>>>>10469) for job 1122.
>>>>I [11:51:14] Started backend /usr/lib/cups/backend/socket (PID 10470)
>>>>for job 1122.
>>>>E [11:54:16] [Job 1122] Unable to send print file to printer:
>>>>Connection reset by peer
>>>>E [11:54:16] PID 10470 stopped with status 1!
>>>>E [11:54:16] PID 10469 stopped with status 9!
>>>>I [11:54:16] Saving printers.conf...
>>>>D [11:54:16] StopJob: printer state is 5
>>>>
>>>>JOB 818 - HP LaserJet Series CUPS v1.1
>>>>http://olneyfriends.org/cupserrors/debug_job818_error_log.txt (full
>>>>debug output)
>>>>I [08:43:30] Adding start banner page "none" to job 818.
>>>>I [08:43:30] Adding end banner page "none" to job 818.
>>>>I [08:43:30] Job 818 queued on 'small_lab' by 'aaron'.
>>>>I [08:43:30] Started filter /usr/lib/cups/filter/pstops (PID 14961)
>>>>for job 818.
>>>>I [08:43:30] Started filter /usr/lib/cups/filter/pstoraster (PID
>>>>14962) for job 818.
>>>>I [08:43:30] Started filter /usr/lib/cups/filter/rastertohp (PID
>>>>14963) for job 818.
>>>>I [08:43:30] Started backend /usr/lib/cups/backend/socket (PID 14964)
>>>>for job 818.
>>>>E [08:45:03] [Job 818] Unable to send print file to printer:
>>>>Connection reset by peer
>>>>E [08:45:03] PID 14964 stopped with status 1!
>>>>I [08:45:03] Saving printers.conf...
>>>>D [08:45:03] StopJob: printer state is 5
>>>>
>>>>SERVER INFO
>>>>Debian Sarge, x86
>>>>IP: 10.56.28.5, Hostname: atlas
>>>>cupsys              1.1.20final+rc1-10
>>>>cupsys-bsd          1.1.20final+rc1-10
>>>>cupsys-client       1.1.20final+rc1-10
>>>>cupsys-pstoraster      <none>
>>>>foomatic-bin           <none>
>>>>foomatic-db            20041106-1
>>>>foomatic-db-engine     3.0.2-2
>>>>foomatic-db-gimp-print <none>
>>>>foomatic-db-hpijs      1.5-20041013-1
>>>>foomatic-filters       3.0.2-3
>>>>foomatic-filters-ppds  20041013-1
>>>>
>>>>PRINTER INFO
>>>>ladmin at atlas:~$ lpstat -v
>>>>device for classroom_lab: socket://10.56.28.47:9100
>>>>device for small_lab: socket://10.56.28.48:9100
>>>>
>>>>
>>>>I'm grateful for any help.
>>>>
>>>>Regards,
>>>>Dane
>>>>
>>>>--
>>>>Dane Miller
>>>>Technology Coordinator
>>>>Olney Friends School
>>>>Barnesville, Ohio
> 
> 
> _______________________________________________
> cups mailing list
> cups at easysw.com
> http://lists.easysw.com/mailman/listinfo/cups
> 
> 





More information about the cups mailing list