CUPS Is Terminating All Printing Jobs, PLEASE HELP

[Matija Krkac]

> Matija Krkac wrote:
> > Hi! I have CUPS on FreeBSD 4.11 machine but it is not working at all. I have not found any useful info about my problem and by the way I am not an experienced user. I am usnig debug mode as LogLevel type. So here is the last and the most important part of error_log file of printing job 8. Thanks!
> >
> > ----part-of-the-log-file----
> > D [12/Feb/2005:04:58:35 +0100] [Job 8] renderer command: gs -q -dBATCH -dPARANOIDSAFER -dQUIET -dNOPAUSE -sDEVICE=ijs -sIjsServer=hpijs -sDevi
> > ceManufacturer="HEWLETT-PACKARD" -sDeviceModel="deskjet 5550" -dDEVICEWIDTHPOINTS=595 -dDEVICEHEIGHTPOINTS=842 -dDuplex=false -r300 -sIjsParam
> > s=Quality:Quality=0,Quality:ColorMode=2,Quality:MediaType=0,Quality:PenSet=2,PS:MediaPosition=7 -dIjsUseOutputFD -sOutputFile=- -
> > D [12/Feb/2005:04:58:35 +0100] [Job 8] perl: warning: Setting locale failed.
> > D [12/Feb/2005:04:58:35 +0100] [Job 8] perl: warning: Please check that your locale settings:
> > D [12/Feb/2005:04:58:35 +0100] [Job 8] LC_ALL = (unset),
> > D [12/Feb/2005:04:58:35 +0100] [Job 8] LANG = "en"
> > D [12/Feb/2005:04:58:35 +0100] [Job 8] are supported and installed on your system.
> > D [12/Feb/2005:04:58:35 +0100] [Job 8] perl: warning: Falling back to the standard locale ("C").
> > D [12/Feb/2005:04:58:35 +0100] [Job 8] foomatic-gswrapper: gs '-dBATCH' '-dPARANOIDSAFER' '-dQUIET' '-dNOPAUSE' '-sDEVICE=ijs' '-sIjsServer=hp
> > ijs' '-sDeviceManufacturer=HEWLETT-PACKARD' '-sDeviceModel=deskjet 5550' '-dDEVICEWIDTHPOINTS=595' '-dDEVICEHEIGHTPOINTS=842' '-dDuplex=false'
> >  '-r300' '-sIjsParams=Quality:Quality=0,Quality:ColorMode=2,Quality:MediaType=0,Quality:PenSet=2,PS:MediaPosition=7' '-dIjsUseOutputFD' '-sOut
> > putFile=/dev/fd/3' '/dev/fd/0' 3>&1 1>&2
> > D [12/Feb/2005:04:58:35 +0100] [Job 8] Unknown device: ijs
> > D [12/Feb/2005:04:58:35 +0100] [Job 8] renderer return value: 1
> > D [12/Feb/2005:04:58:35 +0100] [Job 8] renderer received signal: 1
> > D [12/Feb/2005:04:58:35 +0100] [Job 8] tail process done writing data to STDOUT
> > D [12/Feb/2005:04:58:35 +0100] [Job 8] KID4 finished
> > D [12/Feb/2005:04:58:35 +0100] [Job 8] Process dying with "Possible error on renderer command line or PostScript error. Check options.", exit
> > stat: 3
> > D [12/Feb/2005:04:58:35 +0100] [Job 8] error: No such file or directory (2)
> > D [12/Feb/2005:04:58:35 +0100] [Job 8]
> > D [12/Feb/2005:04:58:35 +0100] [Job 8] Closing renderer
> > D [12/Feb/2005:04:58:35 +0100] [Job 8] KID4 exited with status 0
> > D [12/Feb/2005:04:58:35 +0100] [Job 8] Possible error on renderer command line or PostScript error. Check options.
> > D [12/Feb/2005:04:58:35 +0100] [Job 8] KID3 exited with status 3
> > D [12/Feb/2005:04:58:35 +0100] [Job 8] Renderer exit stat: 3
> > D [12/Feb/2005:04:58:35 +0100] [Job 8] Renderer process finished
> > D [12/Feb/2005:04:58:35 +0100] [Job 8] Killing process 257 (KID3)
> > D [12/Feb/2005:04:58:35 +0100] [Job 8] Process dying with "Error closing renderer", exit stat: 3
> > D [12/Feb/2005:04:58:35 +0100] [Job 8] error: Broken pipe (32)
> > D [12/Feb/2005:04:58:35 +0100] [Job 8] Error closing renderer
> > E [12/Feb/2005:04:58:35 +0100] PID 255 stopped with status 3!
> > D [12/Feb/2005:04:58:35 +0100] UpdateJob: job 8, file 0 is complete.
> > D [12/Feb/2005:04:58:35 +0100] CancelJob: id = 8
> > D [12/Feb/2005:04:58:35 +0100] StopJob: id = 8, force = 0
> > D [12/Feb/2005:04:58:35 +0100] StopJob: printer state is 3
> >
> It seems that ijs is not installed. In my linux system, the package is
> hpijs, and you can download it at the HP project at sourceforge. Compile
> and install it, and try again.
>
> Sds,

I have installed it from ports, hpijs of course. So that should not be a problem...

Matija