Matija Krkac

[Helge Blischke]

Anonymous wrote:
> 
> Hi! I have CUPS on FreeBSD 4.11 machine but it is not working at all. I have not found any useful info about my problem and by the way I am not an experienced user. I am usnig debug mode as LogLevel type. So here is the last and the most important part of error_log file of printing job 8. Thank you!
> 
> ----part-of-the-log-file----
> D [12/Feb/2005:04:58:35 +0100] [Job 8] renderer command: gs -q -dBATCH -dPARANOIDSAFER -dQUIET -dNOPAUSE -sDEVICE=ijs -sIjsServer=hpijs -sDevi
> ceManufacturer="HEWLETT-PACKARD" -sDeviceModel="deskjet 5550" -dDEVICEWIDTHPOINTS=595 -dDEVICEHEIGHTPOINTS=842 -dDuplex=false -r300 -sIjsParam
> s=Quality:Quality=0,Quality:ColorMode=2,Quality:MediaType=0,Quality:PenSet=2,PS:MediaPosition=7 -dIjsUseOutputFD -sOutputFile=- -
> D [12/Feb/2005:04:58:35 +0100] [Job 8] perl: warning: Setting locale failed.
> D [12/Feb/2005:04:58:35 +0100] [Job 8] perl: warning: Please check that your locale settings:
> D [12/Feb/2005:04:58:35 +0100] [Job 8] LC_ALL = (unset),
> D [12/Feb/2005:04:58:35 +0100] [Job 8] LANG = "en"
> D [12/Feb/2005:04:58:35 +0100] [Job 8] are supported and installed on your system.
> D [12/Feb/2005:04:58:35 +0100] [Job 8] perl: warning: Falling back to the standard locale ("C").
> D [12/Feb/2005:04:58:35 +0100] [Job 8] foomatic-gswrapper: gs '-dBATCH' '-dPARANOIDSAFER' '-dQUIET' '-dNOPAUSE' '-sDEVICE=ijs' '-sIjsServer=hp
> ijs' '-sDeviceManufacturer=HEWLETT-PACKARD' '-sDeviceModel=deskjet 5550' '-dDEVICEWIDTHPOINTS=595' '-dDEVICEHEIGHTPOINTS=842' '-dDuplex=false'
>  '-r300' '-sIjsParams=Quality:Quality=0,Quality:ColorMode=2,Quality:MediaType=0,Quality:PenSet=2,PS:MediaPosition=7' '-dIjsUseOutputFD' '-sOut
> putFile=/dev/fd/3' '/dev/fd/0' 3>&1 1>&2
> D [12/Feb/2005:04:58:35 +0100] [Job 8] Unknown device: ijs
> D [12/Feb/2005:04:58:35 +0100] [Job 8] renderer return value: 1
> D [12/Feb/2005:04:58:35 +0100] [Job 8] renderer received signal: 1
> D [12/Feb/2005:04:58:35 +0100] [Job 8] tail process done writing data to STDOUT
> D [12/Feb/2005:04:58:35 +0100] [Job 8] KID4 finished
> D [12/Feb/2005:04:58:35 +0100] [Job 8] Process dying with "Possible error on renderer command line or PostScript error. Check options.", exit
> stat: 3
> D [12/Feb/2005:04:58:35 +0100] [Job 8] error: No such file or directory (2)
> D [12/Feb/2005:04:58:35 +0100] [Job 8]
> D [12/Feb/2005:04:58:35 +0100] [Job 8] Closing renderer
> D [12/Feb/2005:04:58:35 +0100] [Job 8] KID4 exited with status 0
> D [12/Feb/2005:04:58:35 +0100] [Job 8] Possible error on renderer command line or PostScript error. Check options.
> D [12/Feb/2005:04:58:35 +0100] [Job 8] KID3 exited with status 3
> D [12/Feb/2005:04:58:35 +0100] [Job 8] Renderer exit stat: 3
> D [12/Feb/2005:04:58:35 +0100] [Job 8] Renderer process finished
> D [12/Feb/2005:04:58:35 +0100] [Job 8] Killing process 257 (KID3)
> D [12/Feb/2005:04:58:35 +0100] [Job 8] Process dying with "Error closing renderer", exit stat: 3
> D [12/Feb/2005:04:58:35 +0100] [Job 8] error: Broken pipe (32)
> D [12/Feb/2005:04:58:35 +0100] [Job 8] Error closing renderer
> E [12/Feb/2005:04:58:35 +0100] PID 255 stopped with status 3!
> D [12/Feb/2005:04:58:35 +0100] UpdateJob: job 8, file 0 is complete.
> D [12/Feb/2005:04:58:35 +0100] CancelJob: id = 8
> D [12/Feb/2005:04:58:35 +0100] StopJob: id = 8, force = 0
> D [12/Feb/2005:04:58:35 +0100] StopJob: printer state is 3

Your ghostscript complains not knowing of the ijs device. That means,
your 
ghostscript has been compiled without the ijs support. Get a newer
version of
Ghostscript, preferable a recent ESP-gs.

Helge

-- 
Helge Blischke
Softwareentwicklung
SRZ Berlin | Firmengruppe besscom
http://www.srz.de
tel: +49 30 75301-360