CUPS automatically stops printers
Joris
joris at nospam.com
Fri Jun 17 07:39:33 PDT 2005
Helge Blischke a écrit :
> Joris wrote:
>
>>Joris a écrit :
>>
>>>Helge Blischke a écrit :
>>>
>>>
>>>>You should only make hpnpf, i.e.
>>>>
>>>># make -f linux_std.mak hpnpf
>>>>
>>>>And, surely, the ID string modification is OK. I'll change it when I
>>>>need
>>>>to make other modifications.
>>>>
>>>>Helge
>>>>
>>>>PS: I never touched the hpnptyd stuff but left it there for copyright
>>>>reasons.
>>>>
>>>>
>>>
>>>OK, i'm using it and it works! Nice.
>>>I still need some times to test it more extensively, because that bug
>>>was happening randomly.
>>>
>>>I keep you in touch :)
>>
>>Hello,
>>
>>I'm sorry but the problem occured again. The hpnpf backend works
>>well for sure, but the printer sometimes get in "pause" state
>>automatically.
>>
>>Have you got some more infos/hints about this issue ?
>>Anyway, thank you for your time you spent to help me :)
>>
>>Cheers
>
>
> Did you see messages like
>
> E [02/Jun/2005:08:31:07 -0100] [Job 7268] SigPipe: received SIGPIPE
>
> in your error_log?
>
> If yes, the printer probably does not honour the @PJL USTATUS JOB and
> related commands which
> the hpnpf backend issues. Depending on the printer and/or the JetDirect
> firmware version,
> the printer may simply shut down the connection after it has received
> the job instead of
> waiting until the job has been printed ...
>
> You may use hpnpf as a standalone utility (use "hpnpf" without any
> command line parameters to get a
> short description of all the available options)
>
> Helge
>
Yes indeed, i can see this error message in my logs.
My printer (HP8150) firmware is up to date, so the mystery is full :p
Thanks for your help Helge, i'll try to tweak hpnpf later.
Til then, i stick with my auto-restart script.
Cheers.
More information about the cups
mailing list