konica minolta PagePro 1300W printer off-line in FC3 :(

[Alexis]

Hello all,
I have an FC3 x64, I've update it.
So I use the cups included in FC3 x64.

I've installed the min12xxW (configure, make make install) and the ppd file
of linuxprinting.

I import the ppd file with the cups utility.

When I try to print a test page it told me that printer is off-line in the
error log job.

I've looked the error_log in debug level but well, nothing special...

when I use this command to print directly with the driver:
$ gs -q -dBATCH -dSAFER -dQUIET -dNOPAUSE -sPAPERSIZE=a4 -r1200
-sDEVICE=pbmraw -sOutputFile=- ~/mozilla.ps  | sudo min12xxw -r 1200
-m 1300W -d/dev/usb/lp0 > /tmp/test.min

$ cat /tmp/test.min > /dev/usb/lp0

It's working. :)

well This printer is working on another computer with mandrake 10.1.

The maker of the min12xxw told me to ask to the cups master because it could
be a specific problem of my cups.

Thanks!!!!