Cupsaddsmb only running "setdriver"

[Michael Sweet]

Anonymous wrote:
> hi
> 
> I have cups-1.1.22 and cups-samba-1.1.16
> 
> When i run cupssaddsmb i have :
> 
> [root at srvtest01 local]# ./cups-1.1.22/sbin/cupsaddsmb -U root -v -a
> Password for root required to access srvtest01.XXx.XXX.XX via SAMBA:
> Running command: rpcclient srvtest01.XXX.XXX.XX -N -U'root%secret' -c 'setdriver Tosh45 Tosh45'
> debug_lookup_classname(acl): Unknown class
> added interface ip=10.40.0.21 bcast=10.40.3.255 nmask=255.255.252.0
> added interface ip=127.0.0.1 bcast=127.255.255.255 nmask=255.0.0.0
> Connecting to host=srvtest01.angers.afone.fr
> Connecting to 127.0.0.1 at port 445
> Doing spnego session setup (blob length=58)
> got OID=1 3 6 1 4 1 311 2 2 10
> got principal=NONE
> Got challenge flags:
> Got NTLMSSP neg_flags=0x60890215
> NTLMSSP: Set final flags:
> Got NTLMSSP neg_flags=0x60080215
> NTLMSSP Sign/Seal - Initialising with flags:
> Got NTLMSSP neg_flags=0x60080215
> lsa_io_sec_qos: length c does not match size 8
> Succesfully set Tosh45 to driver Tosh45.
> 
> This command line dont créeta WIN40 and WIN32X86 don't run smbclient.
> who have an idea???

man cupsaddsmb

The cups-samba-1.1.16 driver set is, by coincidence, only for CUPS
1.1.16 through about 1.1.18.  The cupsaddsmb that was shipped with
CUPS 1.1.22 expects to find the Windows 2000 PostScript driver, not
the WinNT CUPS driver...

-- 
______________________________________________________________________
Michael Sweet, Easy Software Products           mike at easysw dot com
Internet Printing and Document Software          http://www.easysw.com