[cups.bugs] Re: [HIGH] STR #1262: Occasionally cups reports "Unable

[Phil Long]

[STR New]

Additonal info -

Printing from the networked Mac (OS X 10.3) that autodiscovers the printer
seems to have some correlation  with the hanging happening.

I just observed:

(1) Print a ton of stuff successfully from Linux (with the usb attached
LJ1300)
(2) Wake up Powerbook from sleep, print article
(3) Observe LJ1300 with orange LED
(4) lpq reprorts job printing (it's not)
(5) power cycle printer
(6) lpq reports LJ1300 not ready
(7) enable LJ1300 using /usr/bin/enable
(8) queued mac job prints fine
(9) notice this in /var/log/messages

drivers/usb/class/usblp.c: usblp0: error -19 reading printer status
drivers/usb/class/usblp.c: usblp0: removed
usb 2-1: new full speed USB device using ohci_hcd and address 5
drivers/usb/class/usblp.c: usblp0: USB Bidirectional printer dev 5 if 0
alt 1 proto 2 vid 0x03F0 pid 0x1017
IN=eth0 OUT= MAC=00:d0:b7:ba:d2:cc:00:50:57:01:0a:5c:08:00
SRC=68.228.90.80 DST=68.100.46.49 LEN=90 TOS=0x00 PREC=0x00 TTL=113 ID=250
PROTO=UDP SPT=50153 DPT=18228 LEN=70

Link: http://www.cups.org/str.php?L1262
Version: 1.1.23