[cups.general] cups-1.2rc2: printing test page fails

[Michael Sweet]

Jukka Salmi wrote:
> Hi,
> 
> Michael Sweet --> cups (2006-04-13 21:59:27 -0400):
>> Jukka Salmi wrote:
>>> Hi,
>>>
>>> printing the CUPS test page with cups-1.2rc2 on a Lexmark T620 fails
>>> with the following being logged:
> [...]
>>> Hmm, the printer's response is `bad-request'. What does this mean? I
>>> was able to print the CUPS test page with cups-1.1.23 on the same
>>> printer without problems.
>> Change the log level to debug (just check the "Save debugging
>> information for troubleshooting" box on the admin page) and then
>> post the results after another test print.
> 
> Done: here are the resulting [1]log and the [2]PPD in use.
> 
> BTW, if I configure the printer as lpd, i.e. `lpd://' instead of
> `ipp://', printing the test page succeeds.

I *think* you need to add "/ipp" to the end of the device URI, e.g.
"ipp://crab.salmi.ch/ipp".

-- 
______________________________________________________________________
Michael Sweet, Easy Software Products           mike at easysw dot com
Internet Printing and Document Software          http://www.easysw.com