[cups.general] FW: Getting "7 IPP Read Error!"

[Minatra, Pat H.]

Any help possibly on what I need to do to fix this?  I am unable to find
a solution and my management is wanting a resolution to this. 

Thank you for any help and have a GREAT day!

-------------------------
"Life is but a twinkle in the eye of eternity"
"The shortest distance between a problem and a solution is the distance
between your knees and the floor"
"sorrow looks back - worry looks around - faith looks up"
Regards,
Pat H. Minatra - N5GJR
(325) 670-5804 voice
(325) 670-1570 fax
Hardin*Simmons University  
www.hsutx.edu
PO BOX 16040
Abilene, TX  79698

-----Original Message-----
From: cups-bounces at easysw.com [mailto:cups-bounces at easysw.com] On Behalf
Of Michael Sweet
Sent: Monday, August 28, 2006 1:39 PM
To: cups at easysw.com
Subject: Re: [cups.general] FW: Getting "7 IPP Read Error!"

Minatra, Pat H. wrote:
> I am still getting the "IPP Read Error" in the error_log file.
> 
> I found information that leads me to believe that I need to place the
> following in my cupsd.conf file:
> 
> DeviceURI http://10.0.0.160:631/ipp/  (where 10.0.0.160 is the print
> server IP address)

No, DeviceURI is only valid in printers.conf, and definitely will
*not* fix this error message.

-- 
______________________________________________________________________
Michael Sweet, Easy Software Products           mike at easysw dot com
Internet Printing and Document Software          http://www.easysw.com
_______________________________________________
cups mailing list
cups at easysw.com
http://lists.easysw.com/mailman/listinfo/cups