[cups.general] Officejet Pro K550 does not work with cups 1.2.2

[Gregory Sahli]

> Date: Thu, 31 Aug 2006 11:32:37 -0400
> From: Matt Broughton <walterwego at macosx.com.invalid>
> Subject: Re: [cups.general] Officejet Pro K550 does not work with cups
> 	1.2.2
> To: cups at easysw.com
> Message-ID: <26607-cups.general at news.easysw.com>
>
>>
>> For the printer setup I chose the OSX printer utility's option add
>> printer and:
>> -Internet Printing Protocol - IPP
>> -Address: 10.0.1.1 (which is the IP of the Airport base station  
>> that the
>> printer is attached to)
>> -chose HP Officejet Pro K550 Foomatic/hpijs from the menue.
>>
> I'm not very familiar with networking printers and the various  
> protocols
> each device uses.  If no one else here has a ready answer, I would
> suggest you try posting your question to the Apple Discussion board.
> There are some good network people there.  You might try searching the
> printing discussion group as this has probably already been answered
> there.  You can always start a new topic there.
> <http://discussions.apple.com/forum.jspa?forumID=756>.
>
> Matt


Airport Extreme/Express base stations don't accept IPP protocol. They  
do accept HP Jetdirect (socket) protocol.

Greg