2400w 2 weeks and still trying
kim
linux at huskyz.com
Mon Dec 4 13:58:46 PST 2006
Hi Guys
Please bear with me I am not allowed to post links yet...
I am a complete noob. It took me a couple of days to install suse 10.1. I have kernel 2.6.16.21-0.25-default. Linux is installed on a partition next to windows. AMD Athlon 2700, 750Mb Ram, 80Ghdd etc. I am still using XP for day to day work until I have Suse configured to work for me. I expected a learning curve, but I am way off the scale.
I have been trying to install my printer for 2 weeks. It is a magicolor 2400w, which apparently should run using foomatic with the 2300 ppd. (Please do not confuse my language with familiarity, it is merely the babblings of a mimic, no real understanding...)
This is what I have tried so far.. novell.com/support/search.do?cmd=displayKC&docType=kc&externalId=3150964&sliceId=SAL_Public&dialogID=19520022&stateId=1%200%202792508"]click here until I got to point number 5. I dont know what the heck that means....nor how to get there.
I have also searched other threads and googled. I ahve followed the instructions at
linuxprinting.org/cups-doc.html for my printer. I have looked here:
qbik.ch/usb/devices
I have read as much of the cups manual as I could stomach. I have tried to instal beh. I have downloaded two different drivers for the printer and installed them via Yast... nothing
If I dmesg I get the following:-
lp0: using parport0 (interrupt-driven).
usb 3-4: new high speed USB device using ehci_hcd and address 3
usb 3-4: new device found, idVendor=132b, idProduct=2001
usb 3-4: new device strings: Mfr=1, Product=2, SerialNumber=0
usb 3-4: Product: magicolor 2400W
PS next I need to get the scanner to work!
usb 3-4: Manufacturer: KONICA MINOLTA
usb 3-4: configuration #1 chosen from 1 choice
drivers/usb/class/usblp.c: usblp0: USB Bidirectional printer dev 3 if 0 alt 0 proto 2 vid 0x132B pid 0x2001
usbcore: registered new driver usblp
I have attached the whole thing if anyone is interested. I have worked hard on this, and I am not sure if it is stupidity or not... It took me an hour to collate the data for this post... I desparately would like to use Linux as my operating system but not if I cannot print. I have raged at Minolta customer services already, so don't tell me to do that.
Any replies welcome, but constructive ones in baby language written for auntie Mabel most welcome, please think of me as your Auntie Mabel with onset of dementia!
Apparently I have just discovered I am not allowed to attach dmesg file, so here it is in quotes. Apologies. Please help.
Kind regards
Kim
[QUOTE]Linux version 2.6.16.21-0.25-default (geeko at buildhost) (gcc version 4.1.0 (SUSE Linux)) #1 Tue Sep 19 07:26:15 UTC 2006
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000002fff0000 (usable)
BIOS-e820: 000000002fff0000 - 000000002fff8000 (ACPI data)
BIOS-e820: 000000002fff8000 - 0000000030000000 (ACPI NVS)
BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
BIOS-e820: 00000000ffee0000 - 00000000fff00000 (reserved)
BIOS-e820: 00000000fffc0000 - 0000000100000000 (reserved)
0MB HIGHMEM available.
767MB LOWMEM available.
found SMP MP-table at 000fbc70
On node 0 totalpages: 196592
DMA zone: 4096 pages, LIFO batch:0
DMA32 zone: 0 pages, LIFO batch:0
Normal zone: 192496 pages, LIFO batch:31
HighMem zone: 0 pages, LIFO batch:0
DMI 2.3 present.
IO/L-APIC allowed because system is MP or new enough
ACPI: RSDP (v000 AMI ) @ 0x000fab70
ACPI: RSDT (v001 AMIINT SiS740XX 0x00001000 MSFT 0x0100000b) @ 0x2fff0000
ACPI: FADT (v001 AMIINT SiS740XX 0x00000011 MSFT 0x0100000b) @ 0x2fff0030
ACPI: MADT (v001 AMIINT SiS740XX 0x00001000 MSFT 0x0100000b) @ 0x2fff00c0
ACPI: DSDT (v001 SiS 746 0x00000100 MSFT 0x0100000d) @ 0x00000000
ACPI: PM-Timer IO Port: 0x808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
Processor #0 6:8 APIC version 16
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
Allocating PCI resources starting at 40000000 (gap: 30000000:cec00000)
Built 1 zonelists
Kernel command line: root=/dev/hda6 vga=0x317 resume=/dev/hda5 splash=silent PROFILE=default
bootsplash: silent mode.
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
PID hash table entries: 4096 (order: 12, 65536 bytes)
Detected 2171.098 MHz processor.
Using tsc for high-res timesource
Console: colour dummy device 80x25
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Memory: 773800k/786368k available (1490k kernel code, 11968k reserved, 608k data, 156k init, 0k highmem)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Calibrating delay using timer specific routine.. 4346.48 BogoMIPS (lpj=8692977)
Security Framework v1.0.0 initialized
Mount-cache hash table entries: 512
CPU: After generic identify, caps: 0383fbff c1c3fbff 00000000 00000000 00000000 00000000 00000000
CPU: After vendor identify, caps: 0383fbff c1c3fbff 00000000 00000000 00000000 00000000 00000000
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 256K (64 bytes/line)
CPU: After all inits, caps: 0383fbff c1c3fbff 00000000 00000420 00000000 00000000 00000000
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU: AMD Athlon(tm) XP 2700+ stepping 01
Checking 'hlt' instruction... OK.
checking if image is initramfs... it is
Freeing initrd memory: 2321k freed
not found!
ENABLING IO-APIC IRQs
..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: PCI BIOS revision 2.10 entry at 0xfdb31, last bus=2
PCI: Using configuration type 1
ACPI: Subsystem revision 20060127
ACPI: Interpreter enabled
ACPI: Using IOAPIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (0000:00)
PCI: Probing PCI hardware (bus 00)
Uncovering SIS963 that hid as a SIS503 (compatible=0)
Enabling SiS 96x SMBus.
Boot video device is 0000:01:00.0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: Power Resource [URP1] (off)
ACPI: Power Resource [URP2] (off)
ACPI: Power Resource [FDDP] (off)
ACPI: Power Resource [LPTP] (off)
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKF] (IRQs *3 4 5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 *5 6 7 10 11 12 14 15)
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
pnp: PnP ACPI: found 12 devices
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
TC classifier action (bugs to [email]netdev at vger.kernel.org[/email] cc [email]hadi at cyberus.ca[/email])
Setting up standard PCI resources
PCI: Bridge: 0000:00:01.0
IO window: disabled.
MEM window: cdd00000-cfefffff
PREFETCH window: bda00000-cdbfffff
apm: BIOS not found.
audit: initializing netlink socket (disabled)
audit(1165159884.544:1): initialized
Total HugeTLB memory allocated, 0
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
Initializing Cryptographic API
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
vesafb: framebuffer at 0xc0000000, mapped to 0xf0880000, using 6144k, total 65536k
vesafb: mode is 1024x768x16, linelength=2048, pages=1
vesafb: protected mode interface info at c000:e390
vesafb: scrolling: redraw
vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
bootsplash 3.1.6-2004/03/31: looking for picture...<6> silentjpeg size 47089 bytes,<6>...found (1024x768, 27542 bytes, v3).
Console: switching to colour frame buffer device 124x44
fb0: VESA VGA frame buffer device
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Real Time Clock Driver v1.12ac
PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
serio: i8042 AUX port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
RAMDISK driver initialized: 16 RAM disks of 64000K size 1024 blocksize
mice: PS/2 mouse device common for all mice
input: AT Translated Set 2 keyboard as /class/input/input0
input: ImExPS/2 Generic Explorer Mouse as /class/input/input1
input: PC Speaker as /class/input/input2
md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27
md: bitmap version 4.39
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 7, 524288 bytes)
TCP bind hash table entries: 65536 (order: 6, 262144 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
NET: Registered protocol family 1
Using IPI Shortcut mode
ACPI wakeup devices:
PCI0 PS2M PS2K UAR1 USB1 USB2 EHCI LAN MDM
ACPI: (supports S0 S1 S4 S5)
Freeing unused kernel memory: 156k freed
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
SIS5513: IDE controller at PCI slot 0000:00:02.5
SIS5513: chipset revision 0
SIS5513: not 100% native mode: will probe irqs later
SIS5513: SiS 962/963 MuTIOL IDE UDMA133 controller
ide0: BM-DMA at 0xff00-0xff07, BIOS settings: hda:DMA, hdb:DMA
ide1: BM-DMA at 0xff08-0xff0f, BIOS settings: hdc:DMA, hdd:DMA
Probing IDE interface ide0...
hda: probing with STATUS(0x50) instead of ALTSTATUS(0x7f)
hda: Maxtor 4R080L0, ATA DISK drive
hdb: probing with STATUS(0x00) instead of ALTSTATUS(0x7f)
hdb: probing with STATUS(0x00) instead of ALTSTATUS(0x7f)
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
hda: max request size: 512KiB
hda: Host Protected Area detected.
current capacity is 160086528 sectors (81964 MB)
native capacity is 152531460864512 sectors (78096107962 MB)
hda: task_no_data_intr: status=0x51 { DriveReady SeekComplete Error }
hda: task_no_data_intr: error=0x04 { DriveStatusError }
ide: failed opcode was: 0x37
hda: 160086528 sectors (81964 MB) w/2048KiB Cache, CHS=16383/255/63, UDMA(133)
hda: cache flushes supported
hda: hda1 hda2 < hda5 hda6 hda7 >
Probing IDE interface ide1...
hdc: _NEC DVD_RW ND-1300A, ATAPI CD/DVD-ROM drive
hdd: LITE-ON COMBO LTC-48161H, ATAPI CD/DVD-ROM drive
ide1 at 0x170-0x177,0x376 on irq 15
BIOS EDD facility v0.16 2004-Jun-25, 1 devices found
Attempting manual resume
ReiserFS: hda6: found reiserfs format "3.6" with standard journal
ReiserFS: hda6: using ordered data mode
reiserfs: using flush barriers
ReiserFS: hda6: journal params: device hda6, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
ReiserFS: hda6: checking transaction log (hda6)
ReiserFS: hda6: Using r5 hash to sort names
Adding 1164672k swap on /dev/hda5. Priority:-1 extents:1 across:1164672k
parport: PnPBIOS parport detected.
parport0: PC-style at 0x378 (0x778), irq 7, dma 0 [PCSPP,TRISTATE,COMPAT,EPP,ECP,DMA]
lp0: using parport0 (interrupt-driven).
ACPI: PCI Interrupt 0000:00:02.7[C] -> GSI 18 (level, low) -> IRQ 169
gameport: NS558 PnP Gameport is pnp00:0b/gameport0, io 0x200, speed 890kHz
usbcore: registered new driver usbfs
usbcore: registered new driver hub
ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
i2c-sis96x version 1.0.0
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
intel8x0_measure_ac97_clock: measured 52683 usecs
intel8x0: clocking to 48000
ACPI: PCI Interrupt 0000:00:03.0[A] -> GSI 20 (level, low) -> IRQ 177
ohci_hcd 0000:00:03.0: OHCI Host Controller
ohci_hcd 0000:00:03.0: new USB bus registered, assigned bus number 1
ohci_hcd 0000:00:03.0: irq 177, io mem 0xcfffd000
hdc: ATAPI 40X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.20
Linux agpgart interface v0.101 (c) Dave Jones
usb usb1: new device found, idVendor=0000, idProduct=0000
usb usb1: new device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: OHCI Host Controller
usb usb1: Manufacturer: Linux 2.6.16.21-0.25-default ohci_hcd
usb usb1: SerialNumber: 0000:00:03.0
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 3 ports detected
sis900.c: v1.08.09 Sep. 19 2005
hdd: ATAPI 48X DVD-ROM CD-R/RW drive, 2048kB Cache, UDMA(33)
ACPI: PCI Interrupt 0000:00:03.1[B] -> GSI 21 (level, low) -> IRQ 185
ohci_hcd 0000:00:03.1: OHCI Host Controller
ohci_hcd 0000:00:03.1: new USB bus registered, assigned bus number 2
ohci_hcd 0000:00:03.1: irq 185, io mem 0xcfffe000
usb usb2: new device found, idVendor=0000, idProduct=0000
usb usb2: new device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: OHCI Host Controller
usb usb2: Manufacturer: Linux 2.6.16.21-0.25-default ohci_hcd
usb usb2: SerialNumber: 0000:00:03.1
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 3 ports detected
usb 1-1: new low speed USB device using ohci_hcd and address 2
ACPI: PCI Interrupt 0000:00:03.2[D] -> GSI 23 (level, low) -> IRQ 193
ehci_hcd 0000:00:03.2: EHCI Host Controller
PCI: cache line size of 64 is not supported by device 0000:00:03.2
ehci_hcd 0000:00:03.2: new USB bus registered, assigned bus number 3
ehci_hcd 0000:00:03.2: irq 193, io mem 0xcffff000
ehci_hcd 0000:00:03.2: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb3: new device found, idVendor=0000, idProduct=0000
usb usb3: new device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: EHCI Host Controller
usb usb3: Manufacturer: Linux 2.6.16.21-0.25-default ehci_hcd
usb usb3: SerialNumber: 0000:00:03.2
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 6 ports detected
sis96x_smbus 0000:00:02.1: SiS96x SMBus base address: 0x0c00
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
ACPI: PCI Interrupt 0000:00:04.0[A] -> GSI 19 (level, low) -> IRQ 201
0000:00:04.0: Realtek RTL8201 PHY transceiver found at address 1.
0000:00:04.0: Using transceiver found at address 1 as default
eth0: SiS 900 PCI Fast Ethernet at 0xd400, IRQ 201, 00:0b:6a:2e:b3:df.
agpgart: Detected SiS 746 chipset
agpgart: AGP aperture is 128M @ 0xd0000000
usb 1-1: new low speed USB device using ohci_hcd and address 3
device-mapper: 4.5.0-ioctl (2005-10-04) initialised: [email]dm-devel at redhat.com[/email]
dm-netlink version 0.0.2 loaded
usb 1-1: new device found, idVendor=056a, idProduct=0062
usb 1-1: new device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-1: Product: CTF-420 V2.0-0
usb 1-1: Manufacturer: WACOM
usb 1-1: configuration #1 chosen from 1 choice
input: Wacom Volito2 4x5 as /class/input/input3
usbcore: registered new driver wacom
drivers/usb/input/wacom.c: v1.44:USB Wacom Graphire and Wacom Intuos tablet driver
usbcore: registered new driver hiddev
usbcore: registered new driver usbhid
drivers/usb/input/hid-core.c: v2.6:USB HID core driver
loop: loaded (max 8 devices)
ReiserFS: hda7: found reiserfs format "3.6" with standard journal
ReiserFS: hda7: using ordered data mode
reiserfs: using flush barriers
ReiserFS: hda7: journal params: device hda7, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
ReiserFS: hda7: checking transaction log (hda7)
ReiserFS: hda7: Using r5 hash to sort names
AppArmor: AppArmor (version 2.0-19.43r6320) initialized
audit(1165159904.381:2): AppArmor (version 2.0-19.43r6320) initialized
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
IPv6 over IPv4 tunneling driver
ip6_tables: (C) 2000-2006 Netfilter Core Team
ip_tables: (C) 2000-2006 Netfilter Core Team
Netfilter messages via NETLINK v0.30.
ip_conntrack version 2.4 (6143 buckets, 49144 max) - 232 bytes per conntrack
ACPI: Power Button (FF) [PWRF]
ACPI: Power Button (CM) [PWRB]
NET: Registered protocol family 17
eth0: Media Link On 100mbps full-duplex
powernow-k8: Processor cpuid 681 not supported
eth0: no IPv6 routers present
bootsplash: status on console 0 changed to on
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC= SRC=192.168.1.101 DST=224.0.0.251 LEN=112 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=92
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC= SRC=192.168.1.101 DST=224.0.0.251 LEN=112 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=92
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC= SRC=192.168.1.101 DST=224.0.0.251 LEN=112 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=92
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC= SRC=192.168.1.101 DST=224.0.0.251 LEN=112 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=92
SFW2-INext-DROP-DEFLT-INV IN=eth0 OUT= MAC=00:0b:6a:2e:b3:df:00:16:b6:ac:1b:79:08:00 SRC=192.168.1.1 DST=192.168.1.101 LEN=40 TOS=0x00 PREC=0x00 TTL=255 ID=26033 PROTO=TCP SPT=2869 DPT=1099 WINDOW=0 RES=0x00 RST URGP=0
SFW2-INext-DROP-DEFLT-INV IN=eth0 OUT= MAC=00:0b:6a:2e:b3:df:00:16:b6:ac:1b:79:08:00 SRC=216.33.247.11 DST=192.168.1.101 LEN=40 TOS=0x00 PREC=0x00 TTL=60 ID=61801 PROTO=TCP SPT=80 DPT=13144 WINDOW=64240 RES=0x00 ACK RST URGP=0
SFW2-INext-DROP-DEFLT-INV IN=eth0 OUT= MAC=00:0b:6a:2e:b3:df:00:16:b6:ac:1b:79:08:00 SRC=216.33.247.11 DST=192.168.1.101 LEN=40 TOS=0x00 PREC=0x00 TTL=60 ID=58748 PROTO=TCP SPT=80 DPT=13224 WINDOW=64240 RES=0x00 ACK RST URGP=0
SFW2-INext-DROP-DEFLT-INV IN=eth0 OUT= MAC=00:0b:6a:2e:b3:df:00:16:b6:ac:1b:79:08:00 SRC=216.33.247.11 DST=192.168.1.101 LEN=40 TOS=0x00 PREC=0x00 TTL=60 ID=52606 PROTO=TCP SPT=80 DPT=13238 WINDOW=64240 RES=0x00 ACK RST URGP=0
SFW2-INext-DROP-DEFLT-INV IN=eth0 OUT= MAC=00:0b:6a:2e:b3:df:00:16:b6:ac:1b:79:08:00 SRC=216.33.247.11 DST=192.168.1.101 LEN=40 TOS=0x00 PREC=0x00 TTL=60 ID=28050 PROTO=TCP SPT=80 DPT=13266 WINDOW=64240 RES=0x00 ACK RST URGP=0
SFW2-INext-DROP-DEFLT-INV IN=eth0 OUT= MAC=00:0b:6a:2e:b3:df:00:16:b6:ac:1b:79:08:00 SRC=67.15.52.42 DST=192.168.1.101 LEN=64 TOS=0x00 PREC=0x00 TTL=60 ID=37512 DF PROTO=TCP SPT=80 DPT=2891 WINDOW=64240 RES=0x00 ACK SYN URGP=0 OPT (020405B401010402010303000101080A17611E45005A7684)
SFW2-INext-DROP-DEFLT-INV IN=eth0 OUT= MAC=00:0b:6a:2e:b3:df:00:16:b6:ac:1b:79:08:00 SRC=67.15.52.42 DST=192.168.1.101 LEN=64 TOS=0x00 PREC=0x00 TTL=60 ID=51849 DF PROTO=TCP SPT=80 DPT=2891 WINDOW=64240 RES=0x00 ACK SYN URGP=0 OPT (020405B401010402010303000101080A176127A6005A7684)
SCSI subsystem initialized
st: Version 20050830, fixed bufsize 32768, s/g segs 256
end_request: I/O error, dev fd0, sector 0
pnp: Device 00:0a disabled.
parport 0x378 (WARNING): CTR: wrote 0x0c, read 0xff
parport 0x378 (WARNING): DATA: wrote 0xaa, read 0xff
parport 0x378: You gave this address, but there is probably no parallel port there!
parport0: PC-style at 0x378 [PCSPP,TRISTATE]
pnp: Device 00:0a activated.
parport: PnPBIOS parport detected.
parport0: PC-style at 0x378 (0x778), irq 7, dma 0 [PCSPP,TRISTATE,COMPAT,EPP,ECP,DMA]
lp0: using parport0 (interrupt-driven).
pnp: Device 00:0a disabled.
parport 0x378 (WARNING): CTR: wrote 0x0c, read 0xff
parport 0x378 (WARNING): DATA: wrote 0xaa, read 0xff
parport 0x378: You gave this address, but there is probably no parallel port there!
parport0: PC-style at 0x378 [PCSPP,TRISTATE]
ppa: Version 2.07 (for Linux 2.4.x)
end_request: I/O error, dev fd0, sector 0
end_request: I/O error, dev fd0, sector 0
SFW2-INext-DROP-DEFLT-INV IN=eth0 OUT= MAC=00:0b:6a:2e:b3:df:00:16:b6:ac:1b:79:08:00 SRC=67.15.52.42 DST=192.168.1.101 LEN=40 TOS=0x00 PREC=0x00 TTL=255 ID=18454 PROTO=TCP SPT=80 DPT=2891 WINDOW=0 RES=0x00 RST URGP=0
parport 0x378 (WARNING): CTR: wrote 0x0c, read 0xff
parport 0x378 (WARNING): DATA: wrote 0xaa, read 0xff
parport 0x378: You gave this address, but there is probably no parallel port there!
parport0: PC-style at 0x378 [PCSPP,TRISTATE]
pnp: Device 00:0a activated.
parport: PnPBIOS parport detected.
parport0: PC-style at 0x378 (0x778), irq 7, dma 0 [PCSPP,TRISTATE,COMPAT,EPP,ECP,DMA]
lp0: using parport0 (interrupt-driven).
usb 3-4: new high speed USB device using ehci_hcd and address 3
usb 3-4: new device found, idVendor=132b, idProduct=2001
usb 3-4: new device strings: Mfr=1, Product=2, Ser ialNumber=0
usb 3-4: Product: magicolor 2400W
usb 3-4: Manufacturer: KONICA MINOLTA
usb 3-4: configuration #1 chosen from 1 choice
drivers/usb/class/usblp.c: usblp0: USB Bidirectional printer dev 3 if 0 alt 0 proto 2 vid 0x132B pid 0x2001
usbcore: registered new driver usblp
drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver
linux-vuq6:~/foo2zjs # [/QUOTE]
More information about the cups
mailing list