trouble adding beh

hcheng zx2 at shaw.ca
Wed Jul 12 01:10:08 PDT 2006


Hi,

I have compiled and installed min12xxw driver on FC4 install (Kernel 2.6.17). I pretty much followed the cups-doc.html and used the http page to configure cups. The printer (Minolta PagePro 1350W) worked fine upon installation (on parallel:/dev/lp0), but I can't seem to get it to go through beh.

I downloaded the beh script from linuxprinting.org and put it in /usr/lib/cups/backend, and I have tried both 755 and 777 permission with the same results. I have checked that my perl path is indeed in /usr/bin/perl. I dont see "network beh" in lpinfo -v, and when I try to put beh in printers.conf, I get some Access Denied errors for printers.conf in the error log. Any ideas?

thanks!
Haynes

note: - when I restart cups, the printer disappears. I had to add the printer in printers.conf manually to get it to stay.. don't know if this is related.

The version of cups I am using is 1.1.23.

Error_Log
---------
D [12/Jul/2006:00:09:59 -0700] AddLocation: added location '/'
D [12/Jul/2006:00:09:59 -0700] DenyIP: / deny 00000000/00000000
D [12/Jul/2006:00:09:59 -0700] AllowIP: / allow 7f000001/ffffffff
D [12/Jul/2006:00:09:59 -0700] AddLocation: added location '/admin'
D [12/Jul/2006:00:09:59 -0700] DenyIP: /admin deny 00000000/00000000
D [12/Jul/2006:00:09:59 -0700] AllowIP: /admin allow 7f000001/ffffffff
D [12/Jul/2006:00:09:59 -0700] AddLocation: added location 'CUPS_INTERNAL_BROWSE_ACL'
D [12/Jul/2006:00:09:59 -0700] AllowHost: CUPS_INTERNAL_BROWSE_ACL allow @LOCAL
I [12/Jul/2006:00:09:59 -0700] Listening to 7f000001:631
I [12/Jul/2006:00:09:59 -0700] Loaded configuration file "/etc/cups/cupsd.conf"
I [12/Jul/2006:00:09:59 -0700] Configured for up to 100 clients.
I [12/Jul/2006:00:09:59 -0700] Allowing up to 100 client connections per host.
I [12/Jul/2006:00:09:59 -0700] Full reload is required.
D [12/Jul/2006:00:09:59 -0700] LoadAllPrinters: Loading printer konicami...
d [12/Jul/2006:00:09:59 -0700] AddPrinter("konicami")
d [12/Jul/2006:00:09:59 -0700] Adding filter application/vnd.cups-raw printer/konicami 0 -
d [12/Jul/2006:00:09:59 -0700] FindBest: uri = "/printers/konicami"...
d [12/Jul/2006:00:09:59 -0700] FindBest: Location / Limit 7f
d [12/Jul/2006:00:09:59 -0700] FindBest: Location /admin Limit 7f
d [12/Jul/2006:00:09:59 -0700] FindBest: Location CUPS_INTERNAL_BROWSE_ACL Limit 0
d [12/Jul/2006:00:09:59 -0700] FindBest: best = "/"
d [12/Jul/2006:00:09:59 -0700] Adding filter application/vnd.cups-postscript printer/konicami 0 foomatic-rip
D [12/Jul/2006:00:09:59 -0700] LoadDevices: Added device "ipp"...
D [12/Jul/2006:00:09:59 -0700] LoadDevices: Added device "http"...
D [12/Jul/2006:00:09:59 -0700] LoadDevices: Added device "parallel:/dev/lp0"...
D [12/Jul/2006:00:09:59 -0700] LoadDevices: Added device "scsi"...
D [12/Jul/2006:00:09:59 -0700] LoadDevices: Added device "lpd"...
D [12/Jul/2006:00:09:59 -0700] LoadDevices: Added device "smb"...
D [12/Jul/2006:00:09:59 -0700] LoadDevices: Added device "usb:/dev/usb/lp0"...
D [12/Jul/2006:00:09:59 -0700] LoadDevices: Added device "usb:/dev/usb/lp1"...
D [12/Jul/2006:00:09:59 -0700] LoadDevices: Added device "usb:/dev/usb/lp2"...
D [12/Jul/2006:00:09:59 -0700] LoadDevices: Added device "usb:/dev/usb/lp3"...
D [12/Jul/2006:00:09:59 -0700] LoadDevices: Added device "usb:/dev/usb/lp4"...
D [12/Jul/2006:00:09:59 -0700] LoadDevices: Added device "usb:/dev/usb/lp5"...
D [12/Jul/2006:00:09:59 -0700] LoadDevices: Added device "usb:/dev/usb/lp6"...
D [12/Jul/2006:00:09:59 -0700] LoadDevices: Added device "usb:/dev/usb/lp7"...
D [12/Jul/2006:00:09:59 -0700] LoadDevices: Added device "usb:/dev/usb/lp8"...
D [12/Jul/2006:00:09:59 -0700] LoadDevices: Added device "usb:/dev/usb/lp9"...
D [12/Jul/2006:00:09:59 -0700] LoadDevices: Added device "usb:/dev/usb/lp10"...
D [12/Jul/2006:00:09:59 -0700] LoadDevices: Added device "usb:/dev/usb/lp11"...
D [12/Jul/2006:00:09:59 -0700] LoadDevices: Added device "usb:/dev/usb/lp12"...
D [12/Jul/2006:00:09:59 -0700] LoadDevices: Added device "usb:/dev/usb/lp13"...
D [12/Jul/2006:00:09:59 -0700] LoadDevices: Added device "usb:/dev/usb/lp14"...
D [12/Jul/2006:00:09:59 -0700] LoadDevices: Added device "usb:/dev/usb/lp15"...
D [12/Jul/2006:00:09:59 -0700] LoadDevices: Added device "hal"...
D [12/Jul/2006:00:09:59 -0700] LoadDevices: Added device "socket"...
D [12/Jul/2006:00:09:59 -0700] LoadDevices: Added device "serial:/dev/ttyS0?baud=115200"...
D [12/Jul/2006:00:09:59 -0700] LoadDevices: Added device "serial:/dev/ttyS1?baud=115200"...
D [12/Jul/2006:00:09:59 -0700] LoadDevices: Added device "serial:/dev/ttyS2?baud=115200"...
D [12/Jul/2006:00:09:59 -0700] LoadDevices: Added device "serial:/dev/ttyS3?baud=115200"...
I [12/Jul/2006:00:09:59 -0700] LoadPPDs: Read "/etc/cups/ppds.dat", 17 PPDs...
I [12/Jul/2006:00:09:59 -0700] LoadPPDs: No new or changed PPDs...
D [12/Jul/2006:00:09:59 -0700] LoadAllJobs: Scanning /var/spool/cups...
D [12/Jul/2006:00:09:59 -0700] LoadAllJobs: Loading attributes for job 1...
D [12/Jul/2006:00:09:59 -0700] LoadAllJobs: Auto-typing document file d00001-001...
I [12/Jul/2006:00:09:59 -0700] Full reload complete.
D [12/Jul/2006:00:09:59 -0700] StartListening: NumListeners=1
D [12/Jul/2006:00:09:59 -0700] StartListening: address=7f000001 port=631
D [12/Jul/2006:00:09:59 -0700] ResumeListening: setting input bits...
d [12/Jul/2006:00:09:59 -0700] ResumeListening: Adding fd 0 to InputSet...
d [12/Jul/2006:00:09:59 -0700] StartBrowsing: Adding fd 3 to InputSet...
d [12/Jul/2006:00:09:59 -0700] StartServer: Adding fd 4 to InputSet...
d [12/Jul/2006:00:09:59 -0700] AddCert: adding certificate for pid 0
D [12/Jul/2006:00:09:59 -0700] StartJob(1, 0x96940e8)
D [12/Jul/2006:00:09:59 -0700] StartJob() id = 1, file = 0/1
D [12/Jul/2006:00:09:59 -0700] job-sheets=none,none
D [12/Jul/2006:00:09:59 -0700] banner_page = 0
D [12/Jul/2006:00:09:59 -0700] StartJob: argv = "konicami","1","root","Test Page","1","","/var/spool/cups/d00001-001"
D [12/Jul/2006:00:09:59 -0700] StartJob: envp[0]="PATH=/usr/lib/cups/filter:/bin:/usr/bin"
D [12/Jul/2006:00:09:59 -0700] StartJob: envp[1]="SOFTWARE=CUPS/1.1"
D [12/Jul/2006:00:09:59 -0700] StartJob: envp[2]="USER=root"
D [12/Jul/2006:00:09:59 -0700] StartJob: envp[3]="CHARSET=utf-8"
D [12/Jul/2006:00:09:59 -0700] StartJob: envp[4]="LANG=en_US"
D [12/Jul/2006:00:09:59 -0700] StartJob: envp[5]="PPD=/etc/cups/ppd/konicami.ppd"
D [12/Jul/2006:00:09:59 -0700] StartJob: envp[6]="CUPS_SERVERROOT=/etc/cups"
D [12/Jul/2006:00:09:59 -0700] StartJob: envp[7]="RIP_MAX_CACHE=8m"
D [12/Jul/2006:00:09:59 -0700] StartJob: envp[8]="TMPDIR=/var/spool/cups/tmp"
D [12/Jul/2006:00:09:59 -0700] StartJob: envp[9]="CONTENT_TYPE=application/postscript"
D [12/Jul/2006:00:09:59 -0700] StartJob: envp[10]="DEVICE_URI=beh://1/5/3/parallel:/dev/lp0"
D [12/Jul/2006:00:09:59 -0700] StartJob: envp[11]="PRINTER=konicami"
D [12/Jul/2006:00:09:59 -0700] StartJob: envp[12]="CUPS_DATADIR=/usr/share/cups"
D [12/Jul/2006:00:09:59 -0700] StartJob: envp[13]="CUPS_FONTPATH=/usr/share/cups/fonts"
D [12/Jul/2006:00:09:59 -0700] StartJob: envp[14]="CUPS_SERVER=localhost"
D [12/Jul/2006:00:09:59 -0700] StartJob: envp[15]="IPP_PORT=631"
D [12/Jul/2006:00:09:59 -0700] StartJob: envp[16]="DBUS_SESSION_BUS_ADDRESS=unix:abstract=/tmp/dbus-4Cy4GBrPFy,guid=318db4447b1dad7507228b4aa09ead00"
d [12/Jul/2006:00:09:59 -0700] StartJob: Allocating status buffer...
D [12/Jul/2006:00:09:59 -0700] StartJob: statusfds = [ 6 7 ]
D [12/Jul/2006:00:09:59 -0700] StartJob: filterfds[1] = [ 8 -1 ]
D [12/Jul/2006:00:09:59 -0700] StartJob: filter = "/usr/lib/cups/filter/pstops"
D [12/Jul/2006:00:09:59 -0700] StartJob: filterfds[0] = [ 9 10 ]
D [12/Jul/2006:00:09:59 -0700] start_process("/usr/lib/cups/filter/pstops", 0xbfbab6c0, 0xbfbaac38, 8, 10, 7)
I [12/Jul/2006:00:09:59 -0700] Started filter /usr/lib/cups/filter/pstops (PID 4323) for job 1.
D [12/Jul/2006:00:09:59 -0700] StartJob: filter = "/usr/lib/cups/filter/foomatic-rip"
D [12/Jul/2006:00:09:59 -0700] StartJob: filterfds[1] = [ 8 11 ]
D [12/Jul/2006:00:09:59 -0700] start_process("/usr/lib/cups/filter/foomatic-rip", 0xbfbab6c0, 0xbfbaac38, 9, 11, 7)
I [12/Jul/2006:00:09:59 -0700] Started filter /usr/lib/cups/filter/foomatic-rip (PID 4325) for job 1.
D [12/Jul/2006:00:09:59 -0700] StartJob: backend = "/usr/lib/cups/backend/beh"
D [12/Jul/2006:00:09:59 -0700] StartJob: filterfds[0] = [ -1 9 ]
D [12/Jul/2006:00:09:59 -0700] start_process("/usr/lib/cups/backend/beh", 0xbfbab6c0, 0xbfbaac38, 8, 9, 7)
I [12/Jul/2006:00:09:59 -0700] Started backend /usr/lib/cups/backend/beh (PID 4326) for job 1.
d [12/Jul/2006:00:09:59 -0700] StartJob: Adding fd 6 to InputSet...
d [12/Jul/2006:00:09:59 -0700] PID 4323 exited with no errors.
E [12/Jul/2006:00:09:59 -0700] PID 4326 stopped with status 22!
D [12/Jul/2006:00:09:59 -0700] [Job 1] Page = 612x792; 12,12 to 600,780
D [12/Jul/2006:00:09:59 -0700] [Job 1] slowcollate=0, slowduplex=0, sloworder=0
D [12/Jul/2006:00:09:59 -0700] [Job 1] 0 %%BoundingBox: 0 0 612 792
D [12/Jul/2006:00:09:59 -0700] [Job 1] 0 %%Pages: 1
D [12/Jul/2006:00:09:59 -0700] [Job 1] 0 %%LanguageLevel: 1
D [12/Jul/2006:00:09:59 -0700] [Job 1] 0 %%DocumentData: Clean7Bit
D [12/Jul/2006:00:09:59 -0700] [Job 1] 0 %%DocumentSuppliedResources: procset testprint/1.1
D [12/Jul/2006:00:09:59 -0700] [Job 1] 0 %%DocumentNeededResources: font Helvetica Helvetica-Bold Times-Roman
D [12/Jul/2006:00:09:59 -0700] [Job 1] 0 %%Creator: Michael Sweet, Easy Software Products
D [12/Jul/2006:00:09:59 -0700] [Job 1] 0 %%CreationDate: May 11, 1999
D [12/Jul/2006:00:09:59 -0700] [Job 1] 0 %%Title: Test Page
D [12/Jul/2006:00:09:59 -0700] [Job 1] 0 %%EndComments
D [12/Jul/2006:00:09:59 -0700] [Job 1] 0 %%BeginProlog
D [12/Jul/2006:00:09:59 -0700] [Job 1] 0 %%BeginResource procset testprint 1.1 0
D [12/Jul/2006:00:09:59 -0700] [Job 1] 0 %%EndResource
D [12/Jul/2006:00:09:59 -0700] [Job 1] 0 %%EndProlog
D [12/Jul/2006:00:09:59 -0700] [Job 1] 0 %%Page: 1 1
D [12/Jul/2006:00:09:59 -0700] [Job 1] 0 %%Page: 1 1
D [12/Jul/2006:00:09:59 -0700] [Job 1] pw = 587.5, pl = 767.5
D [12/Jul/2006:00:09:59 -0700] [Job 1] PageLeft = 12.2, PageRight = 599.8
D [12/Jul/2006:00:09:59 -0700] [Job 1] PageTop = 779.8, PageBottom = 12.2
D [12/Jul/2006:00:09:59 -0700] [Job 1] PageWidth = 612.0, PageLength = 792.0
D [12/Jul/2006:00:09:59 -0700] [Job 1] 0 %%EOF
D [12/Jul/2006:00:09:59 -0700] [Job 1] Saw EOF!
D [12/Jul/2006:00:09:59 -0700] [Job 1] /usr/lib/cups/backend/beh: Permission denied
D [12/Jul/2006:00:09:59 -0700] [Job 1] foomatic-rip version $Revision: 3.43.2.7 $ running...
D [12/Jul/2006:00:09:59 -0700] [Job 1] Parsing PPD file ...
D [12/Jul/2006:00:09:59 -0700] [Job 1] *cupsFilter: "application/vnd.cups-postscript 0 foomatic-rip"
D [12/Jul/2006:00:09:59 -0700] [Job 1] Added option ColorSpace
D [12/Jul/2006:00:09:59 -0700] [Job 1] Added option MediaType
D [12/Jul/2006:00:09:59 -0700] [Job 1] Added option InputSlot
D [12/Jul/2006:00:09:59 -0700] [Job 1] Added option Economode
D [12/Jul/2006:00:09:59 -0700] [Job 1] Added option PageSize
D [12/Jul/2006:00:09:59 -0700] [Job 1] Added option PageRegion
D [12/Jul/2006:00:09:59 -0700] [Job 1] Added option ImageableArea
D [12/Jul/2006:00:09:59 -0700] [Job 1] Added option PaperDimension
D [12/Jul/2006:00:09:59 -0700] [Job 1] Added option Resolution
D [12/Jul/2006:00:09:59 -0700] [Job 1] Added option Model
D [12/Jul/2006:00:09:59 -0700] [Job 1] Added option DriverPageSize
D [12/Jul/2006:00:09:59 -0700] [Job 1] Added option GSPageSize
D [12/Jul/2006:00:09:59 -0700] [Job 1] Added option GSResolution
D [12/Jul/2006:00:09:59 -0700] [Job 1] Added option DriverResolution
D [12/Jul/2006:00:09:59 -0700] [Job 1] Added option Font
D [12/Jul/2006:00:09:59 -0700] [Job 1] The value 300dpi for Resolution is not a choice!
D [12/Jul/2006:00:09:59 -0700] [Job 1] --> Using 300x300dpi instead!
D [12/Jul/2006:00:09:59 -0700] [Job 1]
D [12/Jul/2006:00:09:59 -0700] [Job 1] Parameter Summary
D [12/Jul/2006:00:09:59 -0700] [Job 1] -----------------
D [12/Jul/2006:00:09:59 -0700] [Job 1]
D [12/Jul/2006:00:09:59 -0700] [Job 1] Spooler: cups
D [12/Jul/2006:00:09:59 -0700] [Job 1] Printer: konicami
D [12/Jul/2006:00:09:59 -0700] [Job 1] PPD file: /etc/cups/ppd/konicami.ppd
D [12/Jul/2006:00:09:59 -0700] [Job 1] Printer model: Minolta PagePro 1350W Foomatic/min12xxw (recommended)
D [12/Jul/2006:00:09:59 -0700] [Job 1] Job title: Test Page
D [12/Jul/2006:00:09:59 -0700] [Job 1] File(s) to be printed:
D [12/Jul/2006:00:09:59 -0700] [Job 1] <STDIN>
D [12/Jul/2006:00:09:59 -0700] [Job 1]
D [12/Jul/2006:00:09:59 -0700] [Job 1]
D [12/Jul/2006:00:09:59 -0700] [Job 1] ================================================
D [12/Jul/2006:00:09:59 -0700] [Job 1]
D [12/Jul/2006:00:09:59 -0700] [Job 1] File: <STDIN>
D [12/Jul/2006:00:09:59 -0700] [Job 1]
D [12/Jul/2006:00:09:59 -0700] [Job 1] ================================================
D [12/Jul/2006:00:09:59 -0700] [Job 1]
D [12/Jul/2006:00:09:59 -0700] [Job 1] Reading PostScript input ...
D [12/Jul/2006:00:09:59 -0700] [Job 1] --> This document is DSC-conforming!
D [12/Jul/2006:00:09:59 -0700] [Job 1]
D [12/Jul/2006:00:09:59 -0700] [Job 1] -----------
D [12/Jul/2006:00:09:59 -0700] [Job 1] Found: %%BeginProlog
D [12/Jul/2006:00:09:59 -0700] [Job 1] Found: %%EndProlog
D [12/Jul/2006:00:09:59 -0700] [Job 1]
D [12/Jul/2006:00:09:59 -0700] [Job 1] -----------
D [12/Jul/2006:00:09:59 -0700] [Job 1] Found: %%BeginSetup
D [12/Jul/2006:00:09:59 -0700] [Job 1] Found: %%BeginFeature: *PageRegion Letter
D [12/Jul/2006:00:09:59 -0700] [Job 1] Option: PageRegion=Letter --> Option will be set by PostScript interpreter
D [12/Jul/2006:00:09:59 -0700] [Job 1] Found: %% FoomaticRIPOptionSetting: PageSize=Letter
D [12/Jul/2006:00:09:59 -0700] [Job 1] Option: PageSize=Letter --> Setting option
D [12/Jul/2006:00:09:59 -0700] [Job 1] Found: %%BeginFeature: *MediaType Normal
D [12/Jul/2006:00:09:59 -0700] [Job 1] Option: MediaType=Normal --> Setting option
D [12/Jul/2006:00:09:59 -0700] [Job 1] Found: %% FoomaticRIPOptionSetting: MediaType=Normal
D [12/Jul/2006:00:09:59 -0700] [Job 1] Option: MediaType=Normal --> Setting option
D [12/Jul/2006:00:09:59 -0700] [Job 1] Found: %%BeginFeature: *InputSlot Default
D [12/Jul/2006:00:09:59 -0700] [Job 1] Option: InputSlot=Default --> Setting option
D [12/Jul/2006:00:09:59 -0700] [Job 1] Found: %% FoomaticRIPOptionSetting: InputSlot=Default
D [12/Jul/2006:00:09:59 -0700] [Job 1] Option: InputSlot=Default --> Setting option
D [12/Jul/2006:00:09:59 -0700] [Job 1] Found: %%BeginFeature: *Economode Off
D [12/Jul/2006:00:09:59 -0700] [Job 1] Option: Economode=Off --> Setting option
D [12/Jul/2006:00:09:59 -0700] [Job 1] Found: %% FoomaticRIPOptionSetting: Economode=Off
D [12/Jul/2006:00:09:59 -0700] [Job 1] Option: Economode=Off --> Setting option
D [12/Jul/2006:00:09:59 -0700] [Job 1] Found: %%EndSetup
D [12/Jul/2006:00:09:59 -0700] [Job 1] Inserting PostScript code for CUPS' page accounting
D [12/Jul/2006:00:09:59 -0700] [Job 1]
D [12/Jul/2006:00:09:59 -0700] [Job 1] -----------
D [12/Jul/2006:00:09:59 -0700] [Job 1] New page:  1 1
D [12/Jul/2006:00:09:59 -0700] [Job 1] Inserting option code into "PageSetup" section.
D [12/Jul/2006:00:09:59 -0700] [Job 1] No page header or page header not DSC-conforming
D [12/Jul/2006:00:09:59 -0700] [Job 1] Stopping search for page header options
D [12/Jul/2006:00:09:59 -0700] [Job 1] Found:
D [12/Jul/2006:00:09:59 -0700] [Job 1] pageHeight sub			% Move down...
D [12/Jul/2006:00:09:59 -0700] [Job 1] --> Output goes directly to the renderer now.
D [12/Jul/2006:00:09:59 -0700] [Job 1]
D [12/Jul/2006:00:09:59 -0700] [Job 1]
D [12/Jul/2006:00:09:59 -0700] [Job 1] Starting renderer
D [12/Jul/2006:00:09:59 -0700] [Job 1] JCL: <job data>
D [12/Jul/2006:00:09:59 -0700] [Job 1]
D [12/Jul/2006:00:09:59 -0700] [Job 1] renderer PID kid4=4328
D [12/Jul/2006:00:09:59 -0700] [Job 1] renderer command: gs -q -dNOPAUSE -dPARANOIDSAFER -dBATCH -sDEVICE=pbmraw -dDEVICEWIDTHPOINTS=612 -dDEVICEHEIGHTPOINTS=792 -r300 -sOutputFile=- - | min12xxw -m 1350W -f letter -r 300 -p normal -t auto
D [12/Jul/2006:00:09:59 -0700] [Job 1]
D [12/Jul/2006:00:09:59 -0700] [Job 1] Closing renderer
D [12/Jul/2006:00:09:59 -0700] [Job 1] foomatic-gswrapper: gs '-dNOPAUSE' '-dPARANOIDSAFER' '-dBATCH' '-sDEVICE=pbmraw' '-dDEVICEWIDTHPOINTS=612' '-dDEVICEHEIGHTPOINTS=792' '-r300' '-sOutputFile=| cat >&3' '/dev/fd/0' 3>&1 1>&2
D [12/Jul/2006:00:09:59 -0700] [Job 1] GNU Ghostscript 7.07 (2003-05-17)
D [12/Jul/2006:00:09:59 -0700] [Job 1] Copyright (C) 2003 artofcode LLC, Benicia, CA.  All rights reserved.
D [12/Jul/2006:00:09:59 -0700] [Job 1] This software comes with NO WARRANTY: see the file PUBLIC for details.
D [12/Jul/2006:00:09:59 -0700] [Job 1] Loading NimbusSanL-Bold font from /usr/share/fonts/default/Type1/n019004l.pfb... 2236312 840350 1682712 389518 0 done.
D [12/Jul/2006:00:09:59 -0700] [Job 1] Using NimbusSansL-Bold font for NimbusSanL-Bold.
D [12/Jul/2006:00:09:59 -0700] [Job 1] Loading NimbusSanL-Regu font from /usr/share/fonts/default/Type1/n019003l.pfb... 2373552 937411 1702808 353244 0 done.
D [12/Jul/2006:00:09:59 -0700] [Job 1] Using NimbusSansL-Regu font for NimbusSanL-Regu.
D [12/Jul/2006:00:09:59 -0700] [Job 1] Loading NimbusRomNo9L-Regu font from /usr/share/fonts/default/Type1/n021003l.pfb... 2550984 1112059 1702808 357711 0 done.
D [12/Jul/2006:00:09:59 -0700] [Job 1] Using NimbusRomanNo9L-Regu font for NimbusRomNo9L-Regu.
D [12/Jul/2006:00:09:59 -0700] [Job 1] Loading NimbusSanL-BoldItal font from /usr/share/fonts/default/Type1/n019024l.pfb... 2668128 1226750 1702808 353112 0 done.
D [12/Jul/2006:00:09:59 -0700] [Job 1] KID3 exited with status 0
D [12/Jul/2006:00:09:59 -0700] [Job 1] Process dying with "error closing *main::STDOUT", exit stat: 9
D [12/Jul/2006:00:09:59 -0700] [Job 1] error: Broken pipe (32)
D [12/Jul/2006:00:09:59 -0700] [Job 1] KID4 exited with status 9
D [12/Jul/2006:00:09:59 -0700] [Job 1] error closing *main::STDOUT
D [12/Jul/2006:00:09:59 -0700] [Job 1] Renderer exit stat: 9
D [12/Jul/2006:00:09:59 -0700] [Job 1] KID3 finished
D [12/Jul/2006:00:09:59 -0700] [Job 1] Renderer process finished
D [12/Jul/2006:00:09:59 -0700] [Job 1] Killing process 4327 (KID3)
D [12/Jul/2006:00:09:59 -0700] [Job 1] Process dying with "Error closing renderer", exit stat: 9
D [12/Jul/2006:00:09:59 -0700] [Job 1] error: Bad file descriptor (9)
D [12/Jul/2006:00:09:59 -0700] [Job 1] Error closing renderer
E [12/Jul/2006:00:09:59 -0700] PID 4325 stopped with status 9!
D [12/Jul/2006:00:09:59 -0700] UpdateJob: job 1, file 0 is complete.
d [12/Jul/2006:00:09:59 -0700] UpdateJob: Removing fd 6 from InputSet...
D [12/Jul/2006:00:09:59 -0700] StopJob: id = 1, force = 0
E [12/Jul/2006:00:09:59 -0700] Unable to backup printers.conf - Permission denied
E [12/Jul/2006:00:09:59 -0700] Unable to save printers.conf - Permission denied
E [12/Jul/2006:00:09:59 -0700] Unable to restore printers.conf - No such file or directory
D [12/Jul/2006:00:09:59 -0700] StopJob: printer state is 5
d [12/Jul/2006:00:09:59 -0700] StopJob: Freeing status buffer...
d [12/Jul/2006:00:09:59 -0700] SaveJob: Closing file 6...
d [12/Jul/2006:00:10:00 -0700] select_timeout: 11 seconds to process active jobs
d [12/Jul/2006:00:10:10 -0700] AcceptClient(lis=0x9689288) 0 NumClients = 0
D [12/Jul/2006:00:10:10 -0700] AcceptClient: 6 from localhost:631.





More information about the cups mailing list