[cups.general] Is it possyble to print a draw on A4 paper size with margins...
Csanyi Pal
csanyipal at csanyipal.info
Sun May 7 04:12:25 PDT 2006
Hello!
Is it possyble to print a draw on A4 paper size with margins from the
edge of the paper with margin lines dimensions:
from the top of the paper: 0.5 mm
from the bottom of the paper: 0.5 mm
from the left of the paper: 20 mm
from the right of the paper: 0.5 mm?
My problem is that that the imageable area of my printer isn't so big
to print these margin lines on an A4 paper size, so my printer dont
print the margin line at 0.5 from the bottom edge of the paper.
There missing the lower margin line and some part of both side margin
lines from the bottom edge of the paper up to 12 mm.
Is there some solution for this with my printer of
HP Business Inkjet 1000 or must I buy a plotter for A4 piper size to get
the whole draw printed out?
Any advices will be appreciated!
--
Regards, Csányi Paul
http://www.ektf.hu/~Csanyi.Pal (Up to now, it is in Hungarian only.)
http://csanyipal.info/moodle <<<--- Moodle - Course Management System
http://csanyipal.info:81 <<<--- sTeam - Cooperative Learning
More information about the cups
mailing list