Kyocera FS-1000 have no output. no errors.

[lb]

> lb wrote:
> >> lb wrote:
> >>>> lb wrote:
> >>>>
> >>>>> So In order to confirm the trouble, I have changed the printer from Kyocera FS-1000 to Canon bjc-1000(I install another driver for it .)  then it can print normally.
> >>>>>
> >>>>> Why the Kyocera FS-1000 can't print anything??
> >>>>>
> >>>> The requested file type for your job is  application/postscript.
> >>>> The FS-1000 series does not have postscript as a standard emulation,
> >>>> only as an option. So maybe your FS-1000 is just capable of printing PCL
> >>>> and ignores PS. Try connecting another Kyocera Postscriptprinter and see
> >>>> what will happen. Or try using a PCL driver. Anyway the data LED of the
> >>>> printer should flicker while receiving print jobs, even if they do not
> >>>> come out.
> >>>>
> >>>> --
> >>>>
> >>>>
> >>>> Gruss / Cheers
> >>>>
> >>>> Robert
> >>> Thanks for your help.
> >>>
> >>> The data LED of the FS-1000 printer was flicker about 2 months ago and can print normally.(Same PC and system and driver) , but now the LED of printer can't flicker when I print jobs.  I used Kyocera FS-1000 Foomatic/pxmolo driver for it . and Foomatic-rip & foomatic-gswrapper scripts.
> >>>
> >>>
> >>>
> >> Did you try printing a file via ftp to check the printer fuction in general?
> >>
> >> --
> >>
> >>
> >> Gruss / Cheers
> >>
> >> Robert
> >
> > FTP? I don't do it .  The printer can print the status page by itself. (To do this , I press the control key of printer control panel for 3 seconds.) and I connect the printer to other PC( windows XP), then print jobs, It's OK. So the printer function is normal.
> >
> >
> >
> >
> It is directly connected to the systems parallel port?
>
> --
>
>
> Gruss / Cheers
>
> Robert

Yes, I directly connected it to the systems parallel port.