HP 8150N Trays

[Kurt Pfeifle]

Allen Curtis wrote:
> Hello,
> 
> Using CUPS (v1.1.xx) on SCO OpenServer 5.7 to an HP8150N.  lpoptions 
> lists "InputSlot/Media Source: *Default Tray1 Tray2 Tray3 Manual Auto".
> The printer has an additional tray module providing trays 5 and 6.
> Is there an updated ppd available that will support these higher
> numbered trays?

Most likely, your current PPD is good enough. It just needs the "modi-
fication" where in the "InstallableOptions" group of settings, you need
to tell it about the addtional trays.

Go to the web interface

  http://localhost:631/printers/<yourprintername>

and click on the "Configure Printer" (or whatever it is called), and
enable the right setting amongst the "installable options".

-- 
Kurt Pfeifle
System & Network Printing Consultant ---- Linux/Unix/Windows/Samba/CUPS
Infotec Deutschland GmbH  .....................  Hedelfinger Strasse 58
A RICOH Company  ...........................  D-70327 Stuttgart/Germany