Zebra ZPL Peel-off

[Jörg Schömer]

> From the CUPS DDK I found out that the CutMedia is the wrong option.
> Can I add a new option to the Zebra.ppd as follows
>
> *OpenUI *PrintMode/Print Mode: PickOne
> *OrderDependency 20 AnySetup *^MM
> *DefaultPrintMode tear
> *PrintMode rewind/Rewind: "<</PrintMode R>>setpagedevice"
> *PrintMode peel/Peel off: "<</PrintMode P>>setpagedevice"
> *PrintMode tear/Tear off: "<</PrintMode T>>setpagedevice"
> *PrintMode cutter/Cutter: "<</PrintMode C>>setpagedevice"
> *PrintMode delayed/Delayed cut: "<</PrintMode D>>setpagedevice"
> *CloseUI: *PrintMode
>
> Best regards
> Joerg

"^MM" doesn't work too, cupstestppd reports an error :-(