CUPS Companion v 1.2.11 - Clients not browsing
Michael Sweet
mike at easysw.com
Wed Feb 20 07:48:39 PST 2008
Robert wrote:
>> Robert wrote:
>>>> Robert wrote:
>>>>> I've installed the CUPS companion CD v1.2.11 (Printer and drivers and tools) on AIX 5.3 TL06
>>>>>
>>>>> I'm using CUPS in an AIX VIO environment.
>>>>>
>>>>> I was able to configure a printer on the CUPS server and print to it. When I configured the client it doesn't browse the server and pick up the printer.
>>>> > ...
>>>>
>>>> Are the client and server on the same subnet?
>>>>
>>>> --
>>>> ______________________________________________________________________
>>>> Michael R Sweet Senior Printing System Engineer
>>>>
>>>
>>> Hi Michael,
>>>
>>> Yup. Both on the same subnet. They are talking across a virtual lan. I can telnet to the CUPS server port from the client and I can look at the printers on the server from the client by using lpstat -h <server> -t. But lpinfo -v or lpstat -t dont show anything on the client.
>> If the virtual LAN doesn't support broadcast or isn't routing UDP
>> packets on port 631, then the client will never see them.
>>
>> --
>> ______________________________________________________________________
>> Michael Sweet, Easy Software Products mike at easysw dot com
>
>
>
>
> Hi Michael,
>
> I got confirmation from IBM that the VLAN has no problems supporting broadcast or routing UDP.
>
> Is there any extra debugging I can use to test?
You can set the LogLevel to debug2 on both systems to see what the
server is sending and what the client is receiving.
--
______________________________________________________________________
Michael Sweet, Easy Software Products mike at easysw dot com
More information about the cups
mailing list