lpq show the printer is NOT ready, how to fix this problem?

[Daniel Li]

> Daniel Li wrote:
> > ...
> >> But when I query the printer, it says not ready, why? how can I fix this problem.
> >> /usr/etc/cups # lpq
> >> printer is not ready
> >> no entries
> >> /usr/etc/cups # ping 192.168.58.145
> >> PING 192.168.58.145 (192.168.58.145): 56 data bytes
> >> 64 bytes from 192.168.58.145: seq=0 ttl=60 time=10.6 ms
> >> 64 bytes from 192.168.58.145: seq=1 ttl=60 time=4.3 ms
> >
> >
> > Any hint or advice is well appreciated, thanks.
>
> Wait longer than 8 hours for a response?
>
> Everything looks correct - what OS/Linux distribution?  Any other
> printing software installed?
>
> --
> ______________________________________________________________________
> Michael Sweet, Easy Software Products           mike at easysw dot com

Kernel 2.6.12, It's arm platform, which is compiled by cross compiler.
BTW, configuration is just copied right from x86 (/etc/cups),which works.