Xerox 7345 requires username & passwd

[Ralph]

Hi,
   I'm trying to set up printing to a xerox 7345. Unfortunately I get the staus 016/757 (incorrect password) on the printer. I have added the following to the ppd file, but still get the same errors... Any ideas?

% ================ Username and password stuff ========
*JCLOpenUI *JCLUserCode/UserCode Settings: PickOne
*DefaultJCLPassword: Off
*DefaultJCLUserCode: Off
*OrderDependency: 20 JCLSetup *JCLUserCode
*JCLUserCode Off:
*JCLUserCode ON: "@PJL SET JOBUSERCODE=1000 <0A>"
*JCLCloseUI *JCLUserCode
% =====================================
*JCLBegin:"<1B>%-12345X at PJL JOB<0A>"
*JCLOpenUI *JCLUserID/UserID Settings: PickOne
*DefaultJCLUserID: Off
*OrderDependency: 10 JCLSetup *JCLUserID
*JCLUserID Off:
*JCLUserID ON: "@PJL SET USERID=1000 <0A>"
*JCLCloseUI *JCLUserID
% =====================================
*JCLOpenUI *JCLPassword/Password Settings: PickOne
*DefaultJCLPassword: Off
*OrderDependency: 10 JCLSetup *JCLPassword
*JCLPassword Off:
*JCLPassword ON: "@PJL SET JOBPASSWORD=1000 <0A>"
*JCLCloseUI: *JCLPassword
% ======================================
*JCLOpenUI *JCLBanner/Banner Sheet: Boolean
*OrderDependency: 10.0 JCLSetup *JCLBanner
*DefaultJCLBanner: True
*JCLBanner False/Disabled: "@PJL SET JOBATTR=<22>@BANR=OFF<22><0A>"
*JCLBanner True/Enabled: "@PJL SET JOBATTR=<22>@BANR=START<22><0A>"
*JCLCloseUI: *JCLBanner

*JCLToPSInterpreter:"@PJL ENTER LANGUAGE = POSTSCRIPT<0A>"
*JCLEnd:"<1B>%-12345X at PJL EOJ<0A><1B>%-12345X<0A>"
% ================= end ===========================