can't set up Belkin wireless print server

[Adam Hardy]

> On Feb 1, 2010, at 3:08 AM, Adam Hardy wrote:
> > I have a Belkin wireless print server and according to the =
> instructions, I should be able to print to it using lpd via linux and =
> Macs.
> > ...
> > Scanning the print server ports shows this:
> >=20
> > adam at isengard:~$ nmap 192.168.0.213
> >=20
> > Starting Nmap 4.62 ( http://nmap.org ) at 2010-01-31 00:43 GMT
> > Stats: 0:00:37 elapsed; 0 hosts completed (1 up), 1 undergoing Connect =
> Scan
> > Connect Scan Timing: About 96.52% done; ETC: 00:43 (0:00:01 remaining)
> > Interesting ports on 192.168.0.213:
> > Not shown: 1702 filtered ports
> > PORT     STATE SERVICE
> > 80/tcp   open  http
> > 515/tcp  open  printer
> > 631/tcp  open  ipp
> > 9100/tcp open  jetdirect
>
>
> A copy of the error_log file might help, but given that port 9100 is =
> supported I'd try using "socket://ip-address" instead of lpd.

Tried socket 9100 but it made no difference. I don't think I can get hold of the error log. I would have to telnet into the print server itself and I don't think it's going to let me do that!

Do you think it could be bust?

Adam