are there any plans for this ?
Helge Blischke
h.blischke at acm.org
Mon Feb 8 07:09:59 PST 2010
christoph beyer wrote:
> Hi again,
>
> sorry to keep bothering you :(
>
> I have now 1.4.2 on the server and 1.4.1 on the client (ubuntu karmic) It
> took me a while to get the 1.4.2 version translated to solaris for now it
> works but there are no job file formats supported I am lacking the
> foomatic stuff probably (will fix that later)
>
> My browsing problem stays the same though with this setup, I have
>
> 'DefaultAuthType Negotiate' in the server cupsd.conf
>
> In the printers.conf file I use the 'AllowUser' policy
>
> [ snip ]
> <Printer conference1>
> AllowUser flemming
> Info duplex printing
> Location conference
> DeviceURI lpd://spool-lpr/conference1
> State Idle
> StateTime 1244639131
> Type 0
> Accepting Yes
> Shared Yes
> JobSheets none none
> QuotaPeriod 0
> PageLimit 0
> KLimit 0
> OpPolicy default
> ErrorPolicy retry-job
> </Printer>
> [snip]
>
> But the printer 'conference1' for ex. is still visible on the client, only
> when I try to print, I get:
>
> D [08/Feb/2010:15:15:14 +0100] [Job 17] Connecting to
> cups-public.desy.de:631 D [08/Feb/2010:15:15:14 +0100] [Job 17] Mit
> Drucker verbinden … D [08/Feb/2010:15:15:14 +0100] [Job 17] STATE:
> -connecting-to-device D [08/Feb/2010:15:15:14 +0100] [Job 17] Mit Drucker
> verbunden … D [08/Feb/2010:15:15:14 +0100] [Job 17] Connected to
> 131.169.56.232:631 (IPv4)... D [08/Feb/2010:15:15:14 +0100] [Job 17]
> hrDeviceDesc="Unknown" D [08/Feb/2010:15:15:14 +0100] [Job 17]
> prtGeneralCurrentLocalization type is 7fdf, expected 2! D
> [08/Feb/2010:15:15:14 +0100] [Job 17] Getting supported attributes... D
> [08/Feb/2010:15:15:14 +0100] [Job 17] document-format-supported (1 values)
> D [08/Feb/2010:15:15:14 +0100] [Job 17] [0] = "application/octet-stream" D
> [08/Feb/2010:15:15:14 +0100] [Job 17] D [08/Feb/2010:15:15:14 +0100] [Job
> 17] STATE: none D [08/Feb/2010:15:15:14 +0100] [Job 17] printer-uri =
> "ipp://cups-public.desy.de:631/printers/pubcp1" D [08/Feb/2010:15:15:14
> +0100] [Job 17] requesting-user-name = "chbeyer" D [08/Feb/2010:15:15:14
> +0100] [Job 17] job-name = "Test Page" D [08/Feb/2010:15:15:14 +0100] [Job
> 17] Set job-printer-state-message to "Druckdatei wurde nicht akzeptiert
> (Unsupported format 'application/postscript'!)!", current level=ERROR D
> [08/Feb/2010:15:15:14 +0100] [Job 17] D [08/Feb/2010:15:15:14 +0100] [Job
> 17] STATE: none D [08/Feb/2010:15:15:14 +0100] [Job 17] ATTR:
> auth-info-required=none D [08/Feb/2010:15:15:14 +0100] [Job 17] Backend
> returned status 1 (failed) D [08/Feb/2010:15:15:14 +0100] [Job 17] End of
> messages D [08/Feb/2010:15:15:14 +0100] [Job 17] printer-state=3(idle) D
> [08/Feb/2010:15:15:14 +0100] [Job 17] printer-state-message="" D
> [08/Feb/2010:15:15:14 +0100] [Job 17] printer-state-reasons=none
>
>
> Sorry for the german output :( It says the print job is rejected because
> postscript is not a supported format.
>
> What did I miss to suppress the browsing of the non-allowed printers ?
>
> cheers
> christoph
>
>> Hi Michael,
>>
>> it's version 1.3.11 on the server, sorry was not aware that is a bit
>> outdated, will try 1.4.2 this afternoon...
>>
>> cheers
>> christoph
>>
>>
>From your log snippet I suspect (though I have only CUPS 1.3.11 here) that
the printer in question is configured as a raw only device (without any PPD,
perhaps using a SYSV style interface script?), as your CUPS tells
"application/octet stream" as the only supported document format.
Helge
PS: Perhaps you could send me details of your configuration (cupsd.conf,
printers.conf, mime.types, mime.convs) per e-mail (h dot blischke at acm dot
org)
More information about the cups
mailing list