Snow Leopard printing error :/usr/libexec/cups/backend/lpd failed

akbar akbarbasha at tataelxsi.co.in
Sat Feb 13 01:11:03 PST 2010


> In the printer window, choose "Log & History" from the Printer menu to =
> see the CUPS error_log file. More than likely you'll see an error =
> message explaining the problem.
>
> > I found from some forums saying to install Rosetta in Snow Leopard may =
> solve the print problems.I installed Rosettta but still its giving same =
> message.
>
> Rosetta will only help when using PowerPC printer drivers.

thanks for quick response, messages in the Log & History is below

D [13/Feb/2010:01:02:03 -0800] [Job 3] Connecting to printer...
D [13/Feb/2010:01:02:03 -0800] [Job 3] STATE: -connecting-to-device
D [13/Feb/2010:01:02:03 -0800] [Job 3] Connected to printer...
D [13/Feb/2010:01:02:03 -0800] [Job 3] Connected to 10.50.26.10:515 (IPv4) (local port 1023)...
D [13/Feb/2010:01:02:03 -0800] [Job 3] prtMarkerSuppliesLevel.1.1 = 2400
D [13/Feb/2010:01:02:03 -0800] [Job 3] prtMarkerSuppliesLevel.1.2 = 2400
D [13/Feb/2010:01:02:03 -0800] [Job 3] prtMarkerSuppliesLevel.1.3 = 2400
D [13/Feb/2010:01:02:03 -0800] [Job 3] prtMarkerSuppliesLevel.1.4 = 3200
D [13/Feb/2010:01:02:03 -0800] [Job 3] ATTR: marker-levels=80,80,80,80
D [13/Feb/2010:01:02:03 -0800] [Job 3] lpd_command 02
D [13/Feb/2010:01:02:03 -0800] [Job 3] Sending command string (2 bytes)...
D [13/Feb/2010:01:02:03 -0800] [Job 3] Reading command status...
D [13/Feb/2010:01:02:03 -0800] [Job 3] lpd_command returning 0
D [13/Feb/2010:01:02:03 -0800] [Job 3] Control file is:
D [13/Feb/2010:01:02:03 -0800] [Job 3] Hgbcblue-4
D [13/Feb/2010:01:02:03 -0800] [Job 3] PAdministrator
D [13/Feb/2010:01:02:03 -0800] [Job 3] JUntitled
D [13/Feb/2010:01:02:03 -0800] [Job 3] ldfA222gbcblue-4
D [13/Feb/2010:01:02:03 -0800] [Job 3] UdfA222gbcblue-4
D [13/Feb/2010:01:02:03 -0800] [Job 3] NUntitled
D [13/Feb/2010:01:02:03 -0800] [Job 3] lpd_command 02 80 cfA222gbcblue-4
D [13/Feb/2010:01:02:03 -0800] [Job 3] Sending command string (20 bytes)...
D [13/Feb/2010:01:02:03 -0800] [Job 3] Reading command status...
D [13/Feb/2010:01:02:03 -0800] [Job 3] lpd_command returning 2
D [13/Feb/2010:01:02:03 -0800] [Job 3] Backend returned status 1 (failed)
D [13/Feb/2010:01:02:03 -0800] [Job 3] Printer stopped due to backend errors; please consult the error_log file for details.
D [13/Feb/2010:01:02:03 -0800] [Job 3] End of messages
D [13/Feb/2010:01:02:03 -0800] [Job 3] printer-state=5(stopped)
D [13/Feb/2010:01:02:03 -0800] [Job 3] printer-state-message="Remote host did not respond with command status byte after 300 seconds!"
D [13/Feb/2010:01:02:03 -0800] [Job 3] printer-state-reasons=paused


how can I solve this problem.

thanks
Akbar





More information about the cups mailing list