[cups.general] Labelprinter and Postscript pagesizes
Thomas Mieslinger
thomas.mieslinger at 1und1.de
Wed Sep 15 12:32:54 PDT 2010
Hi,
maybe I found something that could lead to this strange multiply by 3
behaivior.
Somewhere in the errorlog I found "setting resolution to [ 100 100 ]"
but it is a 300dpi device and I've configure it with the webfrontend to
this value.
If the image gets raster with a 100x100 dpi and is then printed with
300x300dpi it will be 1/3 of the length and width...
just my other 2c on this problem.... No, I don't have an idea where this
100dpi default could come from.
Regards Thomas
Am 15.09.2010 17:46, schrieb Thomas Mieslinger:
> Am 15.09.2010 17:42, schrieb Michael Sweet:
>> On Sep 15, 2010, at 8:40 AM, Thomas Mieslinger wrote:
>>> Hi *,
>>>
>>> up to now I thought that a postscript point is 1/72 inch. But today I
>>> wanted to print on a Zebra GX430t Labelprint. When I configured the
>>> pagesize in 1/72 inch point size the label came out very tiny: code example:
>>
>> 108 x 36 points is 1.5 x 0.5 inches. Are you getting a label smaller than that?
>
> yes, exactly. The printout area is about .5 x .125 inches on a 1.5 x .5
> inch label.
>
> Thomas
More information about the cups
mailing list