Install CUPS-1.4.6 in Redhat 4.0?

[dickson]

1. If I have dbus-devel installed, I don't need to use "--without dbus". Before that, I just install it with "make" and "make install". Does it have any bad effect? Or should I rpmbuild it again without using "--without dbus"?

2. After my first installation, I can call CUPS management webpage. However, there is just a few drivers and no any locale-filter as CUPS 1.1.2. How can I set a locale-filter for this printer? Or does CUPS 1.4.6 can determine which locale-filter to use automatically? ( I mean to print Chinese characters in UTF8 format/encoding)

3. I try to print a PDF file and get error with the following message:

*******************************************************************
Starting renderer
JCL: <job data>

renderer PID kid4=12606
renderer command: gs -q -dPARANOIDSAFER -dBATCH -dNOPAUSE -sOutputFile=- -sDEVICE=omni -sDeviceName=Epson_LQ_1050___360_dpi_ -sproperties=" Form=iso_a3_297.00x420.00mm InputTray=Tray-2 media=MEDIA_PLAIN Resolution=360x180 printmode=PRINT_MODE_1_ANY dither=dither=DITHER_LEVEL Rotation=Portrait" -
foomatic-gswrapper: /usr/local/bin/gs  '-dPARANOIDSAFER' '-dBATCH' '-dNOPAUSE' '-sOutputFile=/dev/fd/3' '-sDEVICE=omni' '-sDeviceName=Epson_LQ_1050___360_dpi_' '-sproperties= Form=iso_a3_297.00x420.00mm InputTray=Tray-2 media=MEDIA_PLAIN Resolution=360x180 printmode=PRINT_MODE_1_ANY dither=dither=DITHER_LEVEL Rotation=Portrait' '/dev/fd/0' 3>&1 1>&2
GPL Ghostscript  9.00 (2010-09-14)
Copyright (C) 2010 Artifex Software, Inc.  All rights reserved.
This software comes with NO WARRANTY: see the file PUBLIC for details.
Unknown device: omni
Unrecoverable error: undefined in .uninstallpagedevice
Operand stack:
    defaultdevice
tee: standard output: Broken pipe

Closing renderer
tee: write error
renderer return value: 1
renderer received signal: 1
tail process done writing data to STDOUT
KID4 finished
Process dying with "Possible error on renderer command line or PostScript error. Check options.", exit stat: 3
Possible error on renderer command line or PostScript error. Check options.

****************************************************************************

I also install the new version of Ghostscript 9.0 manually (not rpm). How can I fix it? Thanks.





> Please file a bug about this at:
>
>     http://www.cups.org/str.php
>
> Basically we are always installing to /etc/dbus-1 if the directory =
> exists rather than honoring the configure option.
>
> (However, since you *do* have the directory it should not be necessary =
> to use --without dbus, just make sure you have dbus-devel installed)
>
> On Jan 24, 2011, at 7:30 PM, dickson wrote:
>
> > I use the following command to rebuild the package in Redhat ES4.0.
> > rpmbuild -ta cups-1.4.6-source.tar.gz --without dbus --without php
> >=20
> > After running, the final result is as follows:
> > *******************************************************************
> > Processing files: cups-debuginfo-1.4.6-1
> > Provides: libcups.so.2.debug libcupscgi.so.1.debug =
> libcupsdriver.so.1.debug libcupsimage.so.2.debug libcupsmime.so.1.debug =
> libcupsppdc.so.1.debug
> > Requires(rpmlib): rpmlib(CompressedFileNames) <=3D 3.0.4-1 =
> rpmlib(PayloadFilesHavePrefix) <=3D 4.0-1
> > Checking for unpackaged file(s): /usr/lib/rpm/check-files =
> /tmp/cups-root
> > error: Installed (but unpackaged) file(s) found:
> >   /etc/dbus-1/system.d/cups.conf
> >=20
> >=20
> > RPM build errors:
> >    Installed (but unpackaged) file(s) found:
> >   /etc/dbus-1/system.d/cups.conf
> > *******************************************************************
> >=20
> > 1. Do I finish the installation of the new version cups-1.4.6? Or I =
> still need to run "xxxx" to install it?
> >=20
> > 2. If I have done the installation, there is nothing when I use =
> "cupsctl" command.
> >=20
> > 3. I read through the documentation of this website. I still cannot =
> find the way to install this new version. Where can I find the document =
> about the complete steps to install it?
> >=20
> > Thanks a lot for any help.
> > _______________________________________________
> > cups mailing list
> > cups at easysw.com
> > http://lists.easysw.com/mailman/listinfo/cups
>
> ________________________________________________________________________
> Michael Sweet, Senior Printing System Engineer, PWG Chair
>
>
>
>