make error after compile 1.4.6

Helge Blischke h.blischke at acm.org
Thu Mar 10 07:57:18 PST 2011 

paul young wrote:

> 
> i have edite out the defines within config.h but then had another error
> for linking cupsd.
> 
> I searched the archives and found a link stating that it maybe possible to
> remove the "-lnsl" entry from the Makefile.
> 
> This has solved the Linking of cupsd but now gives me:
> 
> Linking websearch...
> Undefined                       first referenced
>  symbol                             in file
> gethostbyname                       ../cups/libcups.a(http-addr.o) 
> (symbol belongs to implicit dependency /usr/local/lib/libnsl.so.1) ld:
> fatal: Symbol referencing errors. No output written to websearch collect2:
> ld returned 1 exit status.
> 
> 
> Would I be better off getting the sledge hammer out of the car :), it
> seems that after fixing one issue I roll into another :(
> 
> 
> 
> Regards
> 
> Paul
> 
> 
> 
>> Edit config.h and comment out the HAVE_STATFS define.
>>
>> (this is fixed in the forthcoming 1.4.7 release)
>>
>> On Mar 10, 2011, at 3:13 AM, paul young wrote:
>>
>> >=20
>> > Getting closer. I now have the following output when running the =
>> "make" command.
>> >=20
>> > At this point I'm installing onto a test server that has cups 1.2.7 =
>> installed but no printers:
>> >=20
>> > printers.c: In function `cupsdCreateCommonData':
>> > printers.c:493: error: too few arguments to function `statfs'
>> > printers.c: In function `add_printer_filter':
>> > printers.c:3691: warning: unsigned int format, mode_t arg (arg 6)
>> > printers.c:3718: warning: unsigned int format, mode_t arg (arg 6)
>> > *** Error code 1
>> > The following command caused the error:
>> > gcc  -Wall -Wno-format-y2k -fPIC -Os -g -I.. -D_CUPS_SOURCE  =
>> -DOPENSSL_DISABLE_OLD_DES_SUPPORT  -D_LARGEFILE_SOURCE =
>> -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=3D64 -D_THREAD_SAFE =
>> -D_REENTRANT -D_POSIX_PTHREAD_SEMANTICS  -c -o printers.o printers.c
>> > make: Fatal error: Command failed for target `printers.o'
>> > Current working directory /opt/csw/cups-1.4.6/scheduler
>> > *** Error code 1
>> > The following command caused the error:
>> > for dir in cups filter backend berkeley cgi-bin driver locale man =
>> monitor  notifier ppdc scheduler systemv test    conf data doc examples =
>> fonts templates; do\
>> >        echo Making all in $dir... ;\
>> >        (cd $dir ; make  all ) || exit 1;\
>> > done
>> > make: Fatal error: Command failed for target `all'
>> >=20
>> >=20
>> > Is this due to another flag being required during the configure stage?
>> >=20
>> > regards
>> >=20
>> > Paul
>> >=20
>> >=20
>> >=20
>> >=20
>> >> Thank you for your quick reply, I will give it a try now.
>> >>=20
>> >> Interesting bit for me is that the site I'm currently working at =
>> stated they were running Solaris 10, is this an old version?
>> >>=20
>> >>=20
>> >>=20
>> >>=20
>> >>> You are using an old version of Solaris - add the "--disable-gssapi"
>> >>> =
>> =3D
>> >>> configure option to make the problem go away or install a newer =
>> version =3D
>> >>> of Solaris that has working GSSAPI headers.
>> >>>=20
>> >>> On Mar 9, 2011, at 8:44 AM, paul young wrote:
>> >>>=20
>> >>>> Hi,
>> >>>> =3D20
>> >>>> I'm quite new to all of the NIX environmet, coming from a Windows
>> >>>> =3D=
>>
>> >>> support back ground.
>> >>>> =3D20
>> >>>> I have managed to run the ./compile for cups 1.4.6. This took a =
>> while =3D
>> >>> for me while debugging missing /libs etc but got there in the end.
>> >>>> =3D20
>> >>>> Once this completed I almost jumped for joy and jumped straight to =
>> the =3D
>> >>> next step of "make".
>> >>>> =3D20
>> >>>> This has failed with the following ppdc error:
>> >>>> =3D20
>> >>>> Compiling ppdc-array.cxx...
>> >>>> In file included from ../cups/http-private.h:60,
>> >>>>                from ../cups/globals.h:26,
>> >>>>                from ppdc-private.h:24,
>> >>>>                from ppdc-array.cxx:29:
>> >>>> /usr/include/kerberosv5/krb5.h:11: warning: ignoring #pragma ident
>> >>>> In file included from ../cups/http-private.h:60,
>> >>>>                from ../cups/globals.h:26,
>> >>>>                from ppdc-private.h:24,
>> >>>>                from ppdc-array.cxx:29:
>> >>>> /usr/include/kerberosv5/krb5.h:3122: error: expected declaration =3D
>> >>> before '}' token
>> >>>> In file included from ../cups/http-private.h:60,
>> >>>>                from ../cups/globals.h:26,
>> >>>>                from ppdc-private.h:24,
>> >>>>                from ppdc-array.cxx:29:
>> >>>> /usr/include/kerberosv5/krb5.h:3121:1: unterminated #ifdef
>> >>>> /usr/include/kerberosv5/krb5.h:8:1: unterminated #ifndef
>> >>>> In file included from ../cups/globals.h:26,
>> >>>>                from ppdc-private.h:24,
>> >>>>                from ppdc-array.cxx:29:
>> >>>> ./cups/http-private.h:59:1: unterminated #ifdef
>> >>>> ./cups/http-private.h:43:1: unterminated #ifdef
>> >>>> ./cups/http-private.h:18:1: unterminated #ifndef
>> >>>> In file included from ppdc-private.h:24,
>> >>>>                from ppdc-array.cxx:29:
>> >>>> ./cups/globals.h:18:1: unterminated #ifndef
>> >>>> In file included from ppdc-array.cxx:29:
>> >>>> ppdc-private.h:15:1: unterminated #ifndef
>> >>>> *** Error code 1
>> >>>> The following command caused the error:
>> >>>> g++  -Wall -Wno-format-y2k -fPIC -Os -g -I.. -D_CUPS_SOURCE =3D
>> >>> -I/usr/include/kerberosv5 -DOPENSSL_DISABLE_OLD_DES_SUPPORT  =3D
>> >>> -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=3D3D64
>> >>> =
>> =3D
>> >>> -D_THREAD_SAFE -D_REENTRANT -D_POSIX_PTHREAD_SEMANTICS  -c -o =3D
>> >>> ppdc-array.o ppdc-array.cxx
>> >>>> make: Fatal error: Command failed for target `ppdc-array.o'
>> >>>> Current working directory /opt/csw/cups-1.4.6/ppdc
>> >>>> *** Error code 1
>> >>>> The following command caused the error:
>> >>>> for dir in cups filter backend berkeley cgi-bin driver locale man
>> >>>> =3D=
>>
>> >>> monitor  notifier ppdc scheduler systemv test    conf data doc =
>> examples =3D
>> >>> fonts templates; do\
>> >>>>       echo Making libraries in $dir... ;\
>> >>>>       (cd $dir ; make  libs) || exit 1;\
>> >>>> done
>> >>>> make: Fatal error: Command failed for target `libs'
>> >>>> =3D20
>> >>>> =3D20
>> >>>> I then tried to uncomment the line "#include "ppdc-private.h"
>> >>>> =3D20
>> >>>> which then gives me a string of other errors which I can post if =3D
>> >>> needed.
>> >>>> =3D20
>> >>>> Can anyone point out what i'm doing wrong please, my time scale to =
>> =3D
>> >>> update cups from 1.2.7 to 1.4.6 is running out fast.
>> >>>> =3D20
>> >>>> Kind Regards
>> >>>> =3D20
>> >>>> Paul
>> >>>> =3D20
>> >>>> =3D20
>> >>>> _______________________________________________
>> >>>> cups-bugs mailing list
>> >>>> cups-bugs at easysw.com
>> >>>> http://lists.easysw.com/mailman/listinfo/cups-bugs
>> >>>=20
>> >>> =
>> ________________________________________________________________________
>> >>> Michael Sweet, Senior Printing System Engineer, PWG Chair
>> >>>=20
>> >>=20
>> >=20
>> > _______________________________________________
>> > cups-bugs mailing list
>> > cups-bugs at easysw.com
>> > http://lists.easysw.com/mailman/listinfo/cups-bugs
>>
>> ________________________________________________________________________
>> Michael Sweet, Senior Printing System Engineer, PWG Chair
>>

It is now some time ago since I had a Solaris 10 system at hand (having now 
openSolaris), but I remember I had to apply a long list of patches to the 
Solaris 10 system to get CUPS (then 1.3.5) compiled, though without ldap and 
kerberos.

Helge

More information about the cups mailing list