[cups.general] Job is "Completed" in queue - did not print

[Michael Sweet]

Dustin,

On Aug 24, 2012, at 1:20 PM, dustin <drange at touchpaydirect.com> wrote:
> It dosent seems to be linked... here is the output:
> 
> ldd /usr/lib/cups/backend/usb
> 
> 	linux-gate.so.1 =>  (0xb7718000)
> 	libusb-0.1.so.4 => /usr/local/lib/libusb-0.1.so.4 (0xb76f4000)
> 	libcups.so.2 => /usr/lib/libcups.so.2 (0xb76aa000)
> 	libc.so.6 => /lib/libc.so.6 (0xb754c000)
> 	libusb-1.0.so.0 => /usr/local/lib/libusb-1.0.so.0 (0xb7540000)

Here is the "libusb" I was asking about.

Try compiling CUPS without libusb support (pass "--disable-libusb" to the configure script) to see if that resolves things.  Alternately you can enable the "file" pseudo device ("cupsctl FileDevice=Yes") and set the device URI for the queue to "file:///dev/usb/lp0".

__________________________________________________
Michael Sweet, Senior Printing System Engineer, PWG Chair