[cups.general] Job is "Completed" in queue - did not print
Michael Sweet
msweet at apple.com
Tue Aug 28 10:25:41 PDT 2012
Dustin,
CUPS 1.4.4 source code is here:
http://ftp.easysw.com/pub/cups/1.4.4
On Aug 28, 2012, at 1:06 PM, dustin <drange at touchpaydirect.com> wrote:
> Thanks,
>
> I am having a hard time finding the cups 1.4.4 src. I found the rpm package, but I am not able to compile and set the config script when using an rpm, is that correct? Or maybe I am over looking something.
>
> I am wanting 1.4.4 because that is my current version.
>
>
>> Dustin,
>>
>> On Aug 24, 2012, at 1:20 PM, dustin <drange at touchpaydirect.com> wrote:
>>> It dosent seems to be linked... here is the output:
>>>
>>> ldd /usr/lib/cups/backend/usb
>>>
>>> linux-gate.so.1 => (0xb7718000)
>>> libusb-0.1.so.4 => /usr/local/lib/libusb-0.1.so.4 (0xb76f4000)
>>> libcups.so.2 => /usr/lib/libcups.so.2 (0xb76aa000)
>>> libc.so.6 => /lib/libc.so.6 (0xb754c000)
>>> libusb-1.0.so.0 => /usr/local/lib/libusb-1.0.so.0 (0xb7540000)
>>
>> Here is the "libusb" I was asking about.
>>
>> Try compiling CUPS without libusb support (pass "--disable-libusb" to the configure script) to see if that resolves things. Alternately you can enable the "file" pseudo device ("cupsctl FileDevice=Yes") and set the device URI for the queue to "file:///dev/usb/lp0".
>>
>> __________________________________________________
>> Michael Sweet, Senior Printing System Engineer, PWG Chair
>>
>
> _______________________________________________
> cups mailing list
> cups at easysw.com
> http://lists.easysw.com/mailman/listinfo/cups
__________________________________________________
Michael Sweet, Senior Printing System Engineer, PWG Chair
More information about the cups
mailing list