Problems after HDD-rescue

[Ralf Moeller]

Hi!
after a harddisk-rescue (out of diskfailure) i restored all to a new
drive with same size. it was copied by filesystem backup, not by partition-
way. after all, there are some errors. one of that is, that the cups
does not work anymore. it is using a brother MFC215C with MFC210C-driver.
before it was working ok.

after i tryied to reinstall cups and drivers, there are still errors.
the internal scanner works fine with xsane, but printing and service-
jobs are impossible.

mostly it says :

Unsupported format 'application/vnd.cups-command'!

i tried to restore all of the filesystem as best as possible, but
even much tries i cant find a solution.

also in /var/log/debug there were some errors after bootup :

Jun 23 16:35:46 localhost udev-configure-printer: add /module/lp
Jun 23 16:35:46 localhost udev-configure-printer: add /devices/pnp0/00:07/printer/lp0
Jun 23 16:35:46 localhost kernel: [   25.805152] i915 0000:00:02.0: setting latency timer to 64
Jun 23 16:35:46 localhost kernel: [   26.008011] eth0: no IPv6 routers present
Jun 23 16:35:49 localhost udev-configure-printer: add /devices/pci0000:00/0000:00:1d.2/usb4/4-1/4-1:1.0
Jun 23 16:35:49 localhost udev-configure-printer: parent devpath is /devices/pci0000:00/0000:00:1d.2/usb4/4-1
Jun 23 16:35:49 localhost udev-configure-printer: Device vendor/product is 04F9:0193
Jun 23 16:35:49 localhost udev-configure-printer: add /devices/pci0000:00/0000:00:1d.2/usb4/4-1/4-1:1.0/usb/lp0
Jun 23 16:35:49 localhost udev-configure-printer: failed to claim interface
Jun 23 16:35:49 localhost udev-configure-printer: parent devpath is /devices/pci0000:00/0000:00:1d.2/usb4/4-1
Jun 23 16:35:49 localhost udev-configure-printer: MFG:Brother MDL:MFC-215C SERN:- serial:BROB6F894765
Jun 23 16:36:05 localhost udev-configure-printer: URI matches without serial number: usb://Brother/MFC-215C
Jun 23 16:36:05 localhost udev-configure-printer: No serial number URI matches so using those without

to plugout the printer-usb-plug and plug it in again solves that message,
but still same cups-errors. also after a reboot this message apears
again after bootup in the debug-log ... that was different before
i made the hdd-exchange.

can anyone tries to help me to understand were possible the errors are ?

friendly greetz,
ralf moeller