[cups] Zebra GK420d rev.2 and CUPS

[Johan Henæs]

On 14 Aug 2014, at 11:48, Helge Blischke <HelgeBlischke at web.de> wrote:

> 
> Am 13.08.2014 um 21:56 schrieb Johan Henæs:
> 
>> 
>> On 09 Aug 2014, at 22:46, Helge Blischke <HelgeBlischke at web.de> wrote:
>> 
>>> 
>>> Am 09.08.2014 um 21:24 schrieb Johan Henæs:
>>> 
>>>> -----BEGIN PGP SIGNED MESSAGE-----
>>>> Hash: SHA1
>>>> 
>>>>> Johan,
>>>>> 
>>>>> please tell in detail how the printer is configured, especially
>>>>> post (an URL to) the PPD you use. And tell the version of CUPS you
>>>>> are using.
>>>>> 
>>>>> Helge
>>>> 
>>>> Thank you for your prompt reply, Helge !
>>>> 
>>>> You can find the config as a text file and the ppd at :
>>>> 
>>>> http://dev.henes.no/CUPS/Printerconfig.txt
>>>> and
>>>> http://dev.henes.no/CUPS/Zebra_Technologies_ZTC_GK420d.ppd
>>>> 
>>>> The CUPS version I am running is 1.5.3....
>>>> 
>>>> Best regards,
>>>> 
>>>> Johan
>>>> -----BEGIN PGP SIGNATURE-----
>>>> Version: GnuPG v1
>>>> 
>>>> iQEcBAEBAgAGBQJT5nVbAAoJEC0aqpW2HUaIIuwIAIupN2fL7FdBEWE1bQUJuiZi
>>>> RnhW92CSsY/x+a3Oahsc/BUBHMLwBORcZcSh46/hE9bezpijXx4pE/wYNBaD2Ujd
>>>> j6j/13jVNNgEx+95aZc8KKBKXWoo+wQJAfNFTnmXDA5L8uUi4VBDPXBwCSp9CB3L
>>>> vwLxdm+xX/dSxCyT/JnVsMGh/EBHOGBnBiWYjG/Oa3oGO2B3IhdjzBUoASTK+jXY
>>>> GZyqmChSw3WyEqybMBzGJBNnWuQefxuFDsp2d7ePX8zzrFcTg6KM0omXXG8JLb4C
>>>> dsYDvROyQppYaubvQUKt8IRm7m6jnuyVlSWzxZn9XgmpyzP7/buo+7Q624/HXmk=
>>>> =bw4v
>>>> -----END PGP SIGNATURE-----
>>>> _______________________________________________
>>>> cups mailing list
>>>> cups at cups.org
>>>> https://www.cups.org/mailman/listinfo/cups
>>> 
>>> Johan,
>>> 
>>> you could try replacing the xxxtoraster filter(s) (xxx either "pdf" or "gs")
>>> by ny gstoraster filter (http://sourceforge.net/projects/cupsaddons/files/filter-gstoraster/).
>>> You probably need to replace the name of the filter in your mime.convs (or whatever
>>> the name of your convs file is) accordingly.
>>> Don't forget to restart cups after performing these changes, and, for safety reasons,
>>> save the original filters in case you need to revert.
>>> 
>>> Helge
>>> _______________________________________________
>>> cups mailing list
>>> cups at cups.org
>>> https://www.cups.org/mailman/listinfo/cups
>> Hi Helge !
>> 
>> I have tried what you suggested with no luck - and I have now tried to print with debugmode on. You can find the log at http://dev.henes.no/CUPS/error_log.txt. I must admit that I am not an expert - but I see that the new gstoraster is loaded ok - and then “rastertolabel” is started. From what I understand this looks quite successful, but I hope that you may have the opportunity to look at it with your trained eye ;-)
>> 
>> Best regards,
>> 
>> johan
> 
> Johan,
> 
> the error_log looks quite ok. Could you please post (an URL to) the original print file
> so that I can simulate the printing up to the raster file?
> 
> Helge
> 
> _______________________________________________
> cups mailing list
> cups at cups.org
> https://www.cups.org/mailman/listinfo/cups
Hi Helge !

Have a look at http://dev.henes.no/CUPS/Sample.pdf ….

Best,

Johan