[cups] Mac OSX with CUPS 1.7.2 Printing fuzzy on Zebra GK420d

[Helge Blischke]

Am 11.07.2014 um 11:42 schrieb Matthew Warren:

> Thanks Helge,
>
> I have tried to print the ZPL but nothing happens, I am using this  
> command:
> lpr -PZebra_Technologies_ZTC_GK420d -o media=Custom.84x101mm -o  
> orientation-requested=3 -o raw temp.10-07.zpl
>
> I have also tried without the -o raw as well.
>
> This is the CUPS error log:
> https://www.evernote.com/shard/s273/sh/5bc0434f-4372-42f1-9e98-2c5e4b569c1b/10e50ad065ecdbed24c0f23f6bb1a458
> On 10 Jul 2014, at 17:22, Helge Blischke <HelgeBlischke at web.de> wrote:
>
>>
>> Am 10.07.2014 um 16:29 schrieb Matthew Warren:
>>
>>> That sounds hopeful!
>>>
>>> Tried printing the RAS file with this command but nothing happens  
>>> (no error)
>>> lpr -P Zebra_Technologies_ZTC_GK420d -o media=Custom.84x101mm -o  
>>> orientation-requested=3 -o raw veeqo.ras
>>>
>>> Same command with a JPG/PNG works ok.
>>>
>>> Any ideas?
>>>
>>
>> Sorry, I forgot to convert the ragter file to the ZPL file which  
>> the printer should understand.
>> Try again using the temp.10-07.zpl file from the same dropbox link.
>>
>> Helge
>>

Matthew,

the error_log tells that everything went OK, i. e. a successfult print.
You could try the following:
lp -d Zebra_Technologies_ZTC_GK420d -o document-format=application/ 
vnd.cups-raster 10-07.ras
(don't know if the media and orientation-requested options are really  
necessary; you need to try).

Helge