[cups] Acquire paper and tray info
Paul Mitchell
pmitchel at email.unc.edu
Thu Jan 22 09:02:43 PST 2015
On Thu, 22 Jan 2015, Johannes Meixner wrote:
>> @PJL SET DUPLEX=OFF @PJL SET PILEMODE=ON
>
> This is wrong.
>
> Each PJL command must be on a separated line:
>
> @PJL SET DUPLEX=OFF
>
> @PJL SET PILEMODE=ON
>
> I.e. a linefeed character is missing after "@PJL SET DUPLEX=OFF"
They are on seperate lines, for some reason, this terminal emulator didn't
get the line feeds when I pasted them into the document I was sending. I
failed to correct that on one line.
But your idea about using a smaller, personal, printer makes a good deal
of sense, given the situation and my learning curve!
Paul Mitchel
==============================================================================
Paul Mitchell
ITS Systems
email: pmitchel at email.unc.edu
location: 440 Franklin, cubby 1512, CB#1150
desk phone: 919 445-0063
==============================================================================
More information about the cups
mailing list