[cups] Connecting to Sharp LPR printserver

[Helge Blischke]

Perhaps you need to modify the printer’s settings (via its web interface or operator panel)
in order to permit connection from your Linux box and what protocol to use.

Helge

> Am 31.07.2015 um 19:50 schrieb Michael Below <below at judiz.de>:
> 
> Am Freitag, den 31.07.2015, 18:49 +0200 schrieb Helge Blischke:
>> Delete the "/lp". 
>> Another possibility is to use the spcket
>> backend with port 9100.
> 
> No luck... I wasn't able to delete the /lp in the web frontend (it
> doesn't change to the next screen then),  but doing it directly in the
> printers.conf (after stopping cups via systemctl) did not change the
> error message. Also it did not matter if I use reserve=yes or rfc1179.
> 
> Also, I did the upgrade to CUPS 2.03 from Debian testing, no change.
> 
> When I try to use the socket I am getting a different error message:
> 
> D [31/Jul/2015:19:44:01 +0200] [Job 95] Connection error: Transport
> endpoint is not connected
> E [31/Jul/2015:19:44:01 +0200] [Job 95] Der Drucker antwortet nicht
> 
> Anything else I can try?
> 
> Cheers
> Michael
> 
> _______________________________________________
> cups mailing list
> cups at cups.org
> https://www.cups.org/mailman/listinfo/cups