[cups] adding delay between print job.

[Dil Lee]

Thanks a lot. Will post back result later. Happen to run out of toner now. *DUH*
Regards,
DIL

On 11/27/15, Helge Blischke <helgeblischke at web.de> wrote:
> Change the deviceURI to
> socket://129:1.1.10?waiteof=true <socket://129:1.1.10?waiteof=true>
>
> If that does not solve the problem (it should be the default as shown by the
> sources),
> write a little filter (here a Perl script):
>
> —— snip ——
> #!/usr/bin/perl -w
> # modify the following as for your needs
> $wait_at_endofjob = 5;		# wait time in seconds
> sleep $wait_at_endofjob;
> —— snip ——
>
> put it into /usr/lib/cups/filter/wait
>
> and insert into the printer’s PPD near the "*ColorDevice“ keyword
> the line
> *cupsFilter: "application/vnd.cups-postscript  0  wait“
>
> and restart cups.
>
> Let me know which of the suggestions works.
>
> Helge
>
>> Am 27.11.2015 um 05:08 schrieb Dil Lee <dillee1 at gmail.com>:
>>
>> printers.conf autodiscovered/generated by cups
>>
>> <Printer FUJI_XEROX_DocuPrint_CM225_228_fw_01>
>> UUID urn:uuid:c12b6830-f492-3cc7-4160-ae5569c18c3b
>> Info FUJI XEROX DocuPrint CM225/228 fw
>> Location ho
>> MakeModel Generic PostScript Printer
>> DeviceURI socket://129.1.1.10
>> State Idle
>> StateTime 1448591763
>> Type 8400972
>> Accepting Yes
>> Shared Yes
>> JobSheets none none
>> QuotaPeriod 0
>> PageLimit 0
>> KLimit 0
>> OpPolicy default
>> ErrorPolicy stop-printer
>> Attribute marker-colors \#00FFFF,#FF00FF,#FFFF00,#000000
>> Attribute marker-levels 6,16,27,35
>> Attribute marker-names Cyan Toner Cartridge,Magenta Toner
>> Cartridge,Yellow Toner Cartridge,Black Toner Cartridge
>> Attribute marker-types toner,toner,toner,toner
>> Attribute marker-change-time 1448591761
>> </Printer>
>>
>>
>>
>> On 11/27/15, Helge Blischke <helgeblischke at web.de> wrote:
>>> Before I do any suggestions, please tell how the printer is connected
>>> to your print server and what PDL you use.
>>>
>>>> Am 26.11.2015 um 16:40 schrieb Dil Lee <dillee1 at gmail.com>:
>>>>
>>>> Hi,
>>>> I have a Fuji-Xerox CM225fw connected to CUPS 1.6.3.
>>>> TLDR I think CUPS is sending new jobs to it before it is fully ready.
>>>> Is there a way to artificially add some wait period between print jobs?
>>>> Thank you for your attention.
>>>> Dil
>>>> _______________________________________________
>>>> cups mailing list
>>>> cups at cups.org
>>>> https://www.cups.org/mailman/listinfo/cups
>>>
>>> _______________________________________________
>>> cups mailing list
>>> cups at cups.org
>>> https://www.cups.org/mailman/listinfo/cups
>>>
>> _______________________________________________
>> cups mailing list
>> cups at cups.org
>> https://www.cups.org/mailman/listinfo/cups
>
> _______________________________________________
> cups mailing list
> cups at cups.org
> https://www.cups.org/mailman/listinfo/cups
>