[cups] Setting up a brother that can do duplex, to make it do duplex?

[Jerry]

On Sat, 29 Oct 2016 18:18:03 -0400, Gene Heskett stated:

>On Saturday 29 October 2016 11:58:37 G.W. Haywood wrote:
>
>> Hello again,
>>
>> On Sat, 29 Oct 2016, Gene Heskett wrote:  
>> > ... Jessie is still haveing teething problems ...  
>>
>> If you need to keep running Wheezy then for now you can run a Jessie
>> virtual machine on the Wheezy box just for printing.  It will take
>> all of twenty minutes to set up.
>>  
>> > More fun will be ... finding or building a place for the keyboard
>> > and mouse. Flying swarf, the name for the cuttings made, must be
>> > kept out of the keyboards else keys get jammed down, and since its
>> > metal, also conductive so must be kept out of the electronics, and
>> > mice don't appreciate a dirty surface either.  
>>
>> Kinda OT for this list - but speaking as a Chartered Engineer there
>> is _no_ place for a (consumer) keyboard and mouse in a machine
>> shop.  
>
>I would agree, and write all the code I use on this machine, exporting
>it to the machine that will run it, but nothing beats seeing a miscue
>in person, hitting esc to stop it, and editing the miscue out of it
>right then and there.  So you need them at the machine.
>
>75% of what I write winds up being a onezie, or at worst a fourzie.
>
>Cheers, Gene Heskett

Did you ever check out this URL:

http://support.brother.com/g/b/downloadlist.aspx?c=us&lang=en&prod=mfcj6920dw_us_eu_as&os=127

-- 
Jerry