[cups] doubts about cutter option
Michael Sweet
msweet at apple.com
Mon Jan 23 10:44:49 PST 2017
Osvaldo,
> On Jan 23, 2017, at 1:36 PM, Osvaldo Parra <bady.sir at gmail.com> wrote:
>
> hi guys, I bought a chinese 58mm kiosk thermal printer on aliexpress, 0
> support and 0 documentation, after a few days of google I found some
> generic(or not?) drivers what worked with printer, the printer has auto
> cutter but it never triggers, only on self test page it does.
>
> drivers contain a ppd file with out "cutter" parameter, I read in here
> <https://www.cups.org/doc/ref-ppdcfile.html#Cutter>about that parameter so
> I add in ppd file the line:
>
> *Cutter Yes/True (both tested)
>
>
> but the printer doesnt cut
>
> any clue?, this "cutter" parameter sends some kind of esc/pos code?, where
> can i see the "source code" of this parameter?
The driver needs to support the option and send the appropriate command to the printer.
(some printers have an out-of-band setting to enable the cutter at the end of each page/job, without the ability to actually control it from the driver...)
_________________________________________________________
Michael Sweet, Senior Printing System Engineer
More information about the cups
mailing list