[cups] Printer on usb/parallel
Axel Braun
axel.braun at gmx.de
Tue Oct 6 03:34:54 PDT 2020
Am Dienstag, 6. Oktober 2020, 12:26:23 CEST schrieb Raphaƫl POITEVIN:
> I'm trying to run an old printer, actually a Braille embosser, a basic-d
> V4 which have only parallel port. I connected it behind an USB parallel
> converter which is detected: /dev/usb/lp0.
>
> In cups interface localhost:631 I don't find any way to choose the
> converter when adding a printer.
You should be able to add/edit the DeviceURL manually, like:
DeviceURI lpd://192.168.1.103/binary_p1
In your case it is probably usb:/dev/usb/lp0
(/etc/cups/printers.conf)
HTH
Axel
More information about the cups
mailing list