[cups] Problem with cups selecting manual tray on HP laserjet
Steinar Bang
sb at dod.no
Tue Dec 13 15:01:26 PST 2022
>>>>> Helge Blischke <helgeblischke-S0/GAf8tV78 at public.gmane.org>:
> Well, from HP there is no hope to get diagnostics without having the real printer ready.
> So, I’d suggest you do the following:
> — execute
> cupsctl —debug-logging
Ok, done!
root at marquez:~# /usr/sbin/cupsctl --debug-logging
root at marquez:~#
> — print a test job to your printer
> and save the job ID (up top 5 digits, I think).
The id was HP_Color_LaserJet_Pro_M252dw_501595_-13 so presumably "13"
was the number
> — select all the lines containing
> Job nnnn
> (where nnnn is the jib ID mentioned above; the space between Job and nnnn
> is mandatory)
Here are all error_log entries starting with 13/ :
https://gist.github.com/steinarb/7ab8d472b82f1c42b3864a759ede827a
> — The resulting text might be quite large; you could send it off the list to me.
> I then can check which printer settings the printer sends to cups.
Well, a gist seemed appropriate...:-)
> Note that the „driverless“ setup (from openprinting.org <http://openprinting.org/>) reduces the possible
> PDLs to URF, PWGRQASTER,, PDF (and a bitmap only PDF variant); no PostScript.
Ahh, so that's the wrong driver to use. I was kind of hoping this meant
it would got PS all the way.
What's the best driver to use for a dual side printing color native
PostScript printer?
Thanks for looking into this! :-)
More information about the cups
mailing list