Kyocera FS-1000 have no output. no errors.

[Robert Gruener]

lb wrote:
>> lb wrote:
>>>> lb wrote:
>>>>
>>>>> So In order to confirm the trouble, I have changed the printer from Kyocera FS-1000 to Canon bjc-1000(I install another driver for it .)  then it can print normally.
>>>>>
>>>>> Why the Kyocera FS-1000 can't print anything??
>>>>>
>>>> The requested file type for your job is  application/postscript.
>>>> The FS-1000 series does not have postscript as a standard emulation,
>>>> only as an option. So maybe your FS-1000 is just capable of printing PCL
>>>> and ignores PS. Try connecting another Kyocera Postscriptprinter and see
>>>> what will happen. Or try using a PCL driver. Anyway the data LED of the
>>>> printer should flicker while receiving print jobs, even if they do not
>>>> come out.
>>>>
>>>> --
>>>>
>>>>
>>>> Gruss / Cheers
>>>>
>>>> Robert
>>> Thanks for your help.
>>>
>>> The data LED of the FS-1000 printer was flicker about 2 months ago and can print normally.(Same PC and system and driver) , but now the LED of printer can't flicker when I print jobs.  I used Kyocera FS-1000 Foomatic/pxmolo driver for it . and Foomatic-rip & foomatic-gswrapper scripts.
>>>
>>>
>>>
>> Did you try printing a file via ftp to check the printer fuction in general?
>>
>> --
>>
>>
>> Gruss / Cheers
>>
>> Robert
> 
> FTP? I don't do it .  The printer can print the status page by itself. (To do this , I press the control key of printer control panel for 3 seconds.) and I connect the printer to other PC( windows XP), then print jobs, It's OK. So the printer function is normal.
> 
> 
> 
> 
It is directly connected to the systems parallel port?

-- 


Gruss / Cheers

Robert