[cups.general] can't set up Belkin wireless print server

[Michael Sweet]

On Feb 1, 2010, at 3:08 AM, Adam Hardy wrote:
> I have a Belkin wireless print server and according to the instructions, I should be able to print to it using lpd via linux and Macs.
> ...
> Scanning the print server ports shows this:
> 
> adam at isengard:~$ nmap 192.168.0.213
> 
> Starting Nmap 4.62 ( http://nmap.org ) at 2010-01-31 00:43 GMT
> Stats: 0:00:37 elapsed; 0 hosts completed (1 up), 1 undergoing Connect Scan
> Connect Scan Timing: About 96.52% done; ETC: 00:43 (0:00:01 remaining)
> Interesting ports on 192.168.0.213:
> Not shown: 1702 filtered ports
> PORT     STATE SERVICE
> 80/tcp   open  http
> 515/tcp  open  printer
> 631/tcp  open  ipp
> 9100/tcp open  jetdirect


A copy of the error_log file might help, but given that port 9100 is supported I'd try using "socket://ip-address" instead of lpd.

___________________________________________________
Michael Sweet, Senior Printing System Engineer